community.network.pn_igmp_snooping – CLI command to modify igmp-snooping

Note

This plugin is part of the community.network collection (version 1.3.2).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.pn_igmp_snooping.

Synopsis

• This module can be used to modify Internet Group Management Protocol (IGMP) snooping.

Parameters

Parameter	Choices/Defaults	Comments
pn_cliswitch string		Target switch to run the CLI on.
pn_enable boolean	Choices: no yes	enable or disable IGMP snooping.
pn_enable_vlans string		enable per VLAN IGMP snooping.
pn_igmpv2_vlans string		VLANs on which to use IGMPv2 protocol.
pn_igmpv3_vlans string		VLANs on which to use IGMPv3 protocol.
pn_no_snoop_linklocal_vlans string		Remove snooping of link-local groups(224.0.0.0/24) on these vlans.
pn_query_interval string		IGMP query interval in seconds.
pn_query_max_response_time string		maximum response time, in seconds, advertised in IGMP queries.
pn_scope string	Choices: local fabric	IGMP snooping scope - fabric or local.
pn_snoop_linklocal_vlans string		Allow snooping of link-local groups(224.0.0.0/24) on these vlans.
pn_vxlan boolean	Choices: no yes	enable or disable IGMP snooping on vxlans.
state string / required	Choices: update	State the action to perform. Use update to modify the igmp-snooping.

Examples

- name: 'Modify IGMP Snooping'
  community.network.pn_igmp_snooping:
    pn_cliswitch: 'sw01'
    state: 'update'
    pn_vxlan: True
    pn_enable_vlans: '1-399,401-4092'
    pn_no_snoop_linklocal_vlans: 'none'
    pn_igmpv3_vlans: '1-399,401-4092'

- name: 'Modify IGMP Snooping'
  community.network.pn_igmp_snooping:
    pn_cliswitch: 'sw01'
    state: 'update'
    pn_vxlan: False
    pn_enable_vlans: '1-399'
    pn_no_snoop_linklocal_vlans: 'none'
    pn_igmpv3_vlans: '1-399'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	indicates whether the CLI caused changes on the target.
command string	always	the CLI command run on the target node.
stderr list / elements=string	on error	set of error responses from the igmp-snooping command.
stdout list / elements=string	always	set of responses from the igmp-snooping command.

Authors

• Pluribus Networks (@rajaspachipulusu17)