community.network.pn_port_cos_rate_setting – CLI command to modify port-cos-rate-setting

Note

This plugin is part of the community.network collection (version 1.3.2).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.pn_port_cos_rate_setting.

Synopsis

  • This modules can be used to update the port cos rate limit.

Parameters

Parameter Choices/Defaults Comments
pn_cliswitch
string
Target switch to run the CLI on.
pn_cos0_rate
string
cos0 rate limit (pps) unlimited or 0 to 10000000.
pn_cos1_rate
string
cos1 rate limit (pps) unlimited or 0 to 10000000.
pn_cos2_rate
string
cos2 rate limit (pps) unlimited or 0 to 10000000.
pn_cos3_rate
string
cos3 rate limit (pps) unlimited or 0 to 10000000.
pn_cos4_rate
string
cos4 rate limit (pps) unlimited or 0 to 10000000.
pn_cos5_rate
string
cos5 rate limit (pps) unlimited or 0 to 10000000.
pn_cos6_rate
string
cos6 rate limit (pps) unlimited or 0 to 10000000.
pn_cos7_rate
string
cos7 rate limit (pps) unlimited or 0 to 10000000.
pn_port
string
    Choices:
  • control-port
  • data-port
  • span-ports
port.
state
string / required
    Choices:
  • update
State the action to perform. Use update to modify the port-cos-rate-setting.

Examples

- name: Port cos rate modify
  community.network.pn_port_cos_rate_setting:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "control-port"
    pn_cos1_rate: "1000"
    pn_cos5_rate: "1000"
    pn_cos2_rate: "1000"
    pn_cos0_rate: "1000"

- name: Port cos rate modify
  community.network.pn_port_cos_rate_setting:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "data-port"
    pn_cos1_rate: "2000"
    pn_cos5_rate: "2000"
    pn_cos2_rate: "2000"
    pn_cos0_rate: "2000"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
indicates whether the CLI caused changes on the target.
command
string
always
the CLI command run on the target node.
stderr
list / elements=string
on error
set of error responses from the port-cos-rate-setting command.
stdout
list / elements=string
always
set of responses from the port-cos-rate-setting command.


Authors

  • Pluribus Networks (@rajaspachipulusu17)