community.network.pn_stp_port – CLI command to modify stp-port.

Note

This plugin is part of the community.network collection (version 1.3.2).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.pn_stp_port.

Synopsis

• This module can be used modify Spanning Tree Protocol (STP) parameters on ports.

Parameters

Parameter	Choices/Defaults	Comments
pn_block boolean	Choices: no yes	Specify if a STP port blocks BPDUs.
pn_bpdu_guard boolean	Choices: no yes	STP port BPDU guard.
pn_cliswitch string		Target switch to run the CLI on.
pn_cost string	Default: "2000"	STP port cost from 1 to 200000000.
pn_edge boolean	Choices: no yes	STP port is an edge port.
pn_filter boolean	Choices: no yes	STP port filters BPDUs.
pn_port string		STP port.
pn_priority string	Default: "128"	STP port priority from 0 to 240.
pn_root_guard boolean	Choices: no yes	STP port Root guard.
state string / required	Choices: update	State the action to perform. Use update to update stp-port.

Examples

- name: Modify stp port
  community.network.pn_stp_port:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "1"
    pn_filter: True
    pn_priority: '144'

- name: Modify stp port
  community.network.pn_stp_port:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "1"
    pn_cost: "200"

- name: Modify stp port
  community.network.pn_stp_port:
    pn_cliswitch: "sw01"
    state: "update"
    pn_port: "1"
    pn_edge: True
    pn_cost: "200"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	indicates whether the CLI caused changes on the target.
command string	always	the CLI command run on the target node.
stderr list / elements=string	on error	set of error responses from the stp-port command.
stdout list / elements=string	always	set of responses from the stp-port command.

Authors

• Pluribus Networks (@rajaspachipulusu17)