community.network.slxos_linkagg – Manage link aggregation groups on Extreme Networks SLX-OS network devices

Note

This plugin is part of the community.network collection (version 1.3.2).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.slxos_linkagg.

Synopsis

• This module provides declarative management of link aggregation groups on Extreme Networks SLX-OS network devices.

Parameters

Parameter	Choices/Defaults	Comments
aggregate string		List of link aggregation definitions.
group string		Channel-group number for the port-channel Link aggregation group. Range 1-1024.
members string		List of members of the link aggregation group.
mode string	Choices: active on passive	Mode of the link aggregation group.
purge boolean	Choices: no ← yes	Purge links not defined in the aggregate parameter.
state string	Choices: present ← absent	State of the link aggregation group.

Notes

Note

• Tested against SLX-OS 17s.1.02

Examples

- name: Create link aggregation group
  community.network.slxos_linkagg:
    group: 10
    state: present

- name: Delete link aggregation group
  community.network.slxos_linkagg:
    group: 10
    state: absent

- name: Set link aggregation group to members
  community.network.slxos_linkagg:
    group: 200
    mode: active
    members:
      - Ethernet 0/1
      - Ethernet 0/2

- name: Remove link aggregation group from Ethernet 0/1
  community.network.slxos_linkagg:
    group: 200
    mode: active
    members:
      - Ethernet 0/1

- name: Create aggregate of linkagg definitions
  community.network.slxos_linkagg:
    aggregate:
      - { group: 3, mode: on, members: [Ethernet 0/1] }
      - { group: 100, mode: passive, members: [Ethernet 0/2] }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always, except for the platforms that use Netconf transport to manage the device.	The list of configuration mode commands to send to the device Sample: ['interface port-channel 30', 'interface Ethernet 0/3', 'channel-group 30 mode on', 'no interface port-channel 30']

Authors

• Matthew Stone (@bigmstone)