fortinet.fortios.fortios_vpn_ipsec_phase1_interface – Configure VPN remote gateway in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 1.1.8).

To install it use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_vpn_ipsec_phase1_interface.

New in version 2.8: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify vpn_ipsec feature and phase1_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter Choices/Defaults Comments
access_token
string
Token-based authentication. Generated from GUI of Fortigate.
state
string
added in 2.9 of fortinet.fortios
    Choices:
  • present
  • absent
Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
vpn_ipsec_phase1_interface
dictionary
Configure VPN remote gateway.
acct_verify
string
    Choices:
  • enable
  • disable
Enable/disable verification of RADIUS accounting record.
add_gw_route
string
    Choices:
  • enable
  • disable
Enable/disable automatically add a route to the remote gateway.
add_route
string
    Choices:
  • disable
  • enable
Enable/disable control addition of a route to peer destination selector.
assign_ip
string
    Choices:
  • disable
  • enable
Enable/disable assignment of IP to IPsec interface via configuration method.
assign_ip_from
string
    Choices:
  • range
  • usrgrp
  • dhcp
  • name
Method by which the IP address will be assigned.
authmethod
string
    Choices:
  • psk
  • signature
Authentication method.
authmethod_remote
string
    Choices:
  • psk
  • signature
Authentication method (remote side).
authpasswd
string
XAuth password (max 35 characters).
authusr
string
XAuth user name.
authusrgrp
string
Authentication user group. Source user.group.name.
auto_discovery_forwarder
string
    Choices:
  • enable
  • disable
Enable/disable forwarding auto-discovery short-cut messages.
auto_discovery_psk
string
    Choices:
  • enable
  • disable
Enable/disable use of pre-shared secrets for authentication of auto-discovery tunnels.
auto_discovery_receiver
string
    Choices:
  • enable
  • disable
Enable/disable accepting auto-discovery short-cut messages.
auto_discovery_sender
string
    Choices:
  • enable
  • disable
Enable/disable sending auto-discovery short-cut messages.
auto_negotiate
string
    Choices:
  • enable
  • disable
Enable/disable automatic initiation of IKE SA negotiation.
backup_gateway
list / elements=string
Instruct unity clients about the backup gateway address(es).
address
string / required
Address of backup gateway.
banner
string
Message that unity client should display after connecting.
certificate
list / elements=string
The names of up to 4 signed personal certificates.
name
string / required
Certificate name. Source vpn.certificate.local.name.
childless_ike
string
    Choices:
  • enable
  • disable
Enable/disable childless IKEv2 initiation (RFC 6023).
client_auto_negotiate
string
    Choices:
  • disable
  • enable
Enable/disable allowing the VPN client to bring up the tunnel when there is no traffic.
client_keep_alive
string
    Choices:
  • disable
  • enable
Enable/disable allowing the VPN client to keep the tunnel up when there is no traffic.
comments
string
Comment.
default_gw
string
IPv4 address of default route gateway to use for traffic exiting the interface.
default_gw_priority
integer
Priority for default gateway route. A higher priority number signifies a less preferred route.
dhgrp
string
    Choices:
  • 1
  • 2
  • 5
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 27
  • 28
  • 29
  • 30
  • 31
DH group.
digital_signature_auth
string
    Choices:
  • enable
  • disable
Enable/disable IKEv2 Digital Signature Authentication (RFC 7427).
distance
integer
Distance for routes added by IKE (1 - 255).
dns_mode
string
    Choices:
  • manual
  • auto
DNS server mode.
domain
string
Instruct unity clients about the default DNS domain.
dpd
string
    Choices:
  • disable
  • on-idle
  • on-demand
Dead Peer Detection mode.
dpd_retrycount
integer
Number of DPD retry attempts.
dpd_retryinterval
string
DPD retry interval.
eap
string
    Choices:
  • enable
  • disable
Enable/disable IKEv2 EAP authentication.
eap_identity
string
    Choices:
  • use-id-payload
  • send-request
IKEv2 EAP peer identity type.
encap_local_gw4
string
Local IPv4 address of GRE/VXLAN tunnel.
encap_local_gw6
string
Local IPv6 address of GRE/VXLAN tunnel.
encap_remote_gw4
string
Remote IPv4 address of GRE/VXLAN tunnel.
encap_remote_gw6
string
Remote IPv6 address of GRE/VXLAN tunnel.
encapsulation
string
    Choices:
  • none
  • gre
  • vxlan
Enable/disable GRE/VXLAN encapsulation.
encapsulation_address
string
    Choices:
  • ike
  • ipv4
  • ipv6
Source for GRE/VXLAN tunnel address.
enforce_unique_id
string
    Choices:
  • disable
  • keep-new
  • keep-old
Enable/disable peer ID uniqueness check.
exchange_interface_ip
string
    Choices:
  • enable
  • disable
Enable/disable exchange of IPsec interface IP address.
forticlient_enforcement
string
    Choices:
  • enable
  • disable
Enable/disable FortiClient enforcement.
fragmentation
string
    Choices:
  • enable
  • disable
Enable/disable fragment IKE message on re-transmission.
fragmentation_mtu
integer
IKE fragmentation MTU (500 - 16000).
group_authentication
string
    Choices:
  • enable
  • disable
Enable/disable IKEv2 IDi group authentication.
group_authentication_secret
string
Password for IKEv2 IDi group authentication. (ASCII string or hexadecimal indicated by a leading 0x.)
ha_sync_esp_seqno
string
    Choices:
  • enable
  • disable
Enable/disable sequence number jump ahead for IPsec HA.
idle_timeout
string
    Choices:
  • enable
  • disable
Enable/disable IPsec tunnel idle timeout.
idle_timeoutinterval
integer
IPsec tunnel idle timeout in minutes (5 - 43200).
ike_version
string
    Choices:
  • 1
  • 2
IKE protocol version.
include_local_lan
string
    Choices:
  • disable
  • enable
Enable/disable allow local LAN access on unity clients.
interface
string
Local physical, aggregate, or VLAN outgoing interface. Source system.interface.name.
ip_version
string
    Choices:
  • 4
  • 6
IP version to use for VPN interface.
ipv4_dns_server1
string
IPv4 DNS server 1.
ipv4_dns_server2
string
IPv4 DNS server 2.
ipv4_dns_server3
string
IPv4 DNS server 3.
ipv4_end_ip
string
End of IPv4 range.
ipv4_exclude_range
list / elements=string
Configuration Method IPv4 exclude ranges.
end_ip
string
End of IPv4 exclusive range.
id
integer / required
ID.
start_ip
string
Start of IPv4 exclusive range.
ipv4_name
string
IPv4 address name. Source firewall.address.name firewall.addrgrp.name.
ipv4_netmask
string
IPv4 Netmask.
ipv4_split_exclude
string
IPv4 subnets that should not be sent over the IPsec tunnel. Source firewall.address.name firewall.addrgrp.name.
ipv4_split_include
string
IPv4 split-include subnets. Source firewall.address.name firewall.addrgrp.name.
ipv4_start_ip
string
Start of IPv4 range.
ipv4_wins_server1
string
WINS server 1.
ipv4_wins_server2
string
WINS server 2.
ipv6_dns_server1
string
IPv6 DNS server 1.
ipv6_dns_server2
string
IPv6 DNS server 2.
ipv6_dns_server3
string
IPv6 DNS server 3.
ipv6_end_ip
string
End of IPv6 range.
ipv6_exclude_range
list / elements=string
Configuration method IPv6 exclude ranges.
end_ip
string
End of IPv6 exclusive range.
id
integer / required
ID.
start_ip
string
Start of IPv6 exclusive range.
ipv6_name
string
IPv6 address name. Source firewall.address6.name firewall.addrgrp6.name.
ipv6_prefix
integer
IPv6 prefix.
ipv6_split_exclude
string
IPv6 subnets that should not be sent over the IPsec tunnel. Source firewall.address6.name firewall.addrgrp6.name.
ipv6_split_include
string
IPv6 split-include subnets. Source firewall.address6.name firewall.addrgrp6.name.
ipv6_start_ip
string
Start of IPv6 range.
keepalive
integer
NAT-T keep alive interval.
keylife
integer
Time to wait in seconds before phase 1 encryption key expires.
local_gw
string
IPv4 address of the local gateway"s external interface.
local_gw6
string
IPv6 address of the local gateway"s external interface.
localid
string
Local ID.
localid_type
string
    Choices:
  • auto
  • fqdn
  • user-fqdn
  • keyid
  • address
  • asn1dn
Local ID type.
mesh_selector_type
string
    Choices:
  • disable
  • subnet
  • host
Add selectors containing subsets of the configuration depending on traffic.
mode
string
    Choices:
  • aggressive
  • main
The ID protection mode used to establish a secure channel.
mode_cfg
string
    Choices:
  • disable
  • enable
Enable/disable configuration method.
monitor
string
IPsec interface as backup for primary interface. Source vpn.ipsec.phase1-interface.name.
monitor_hold_down_delay
integer
Time to wait in seconds before recovery once primary re-establishes.
monitor_hold_down_time
string
Time of day at which to fail back to primary after it re-establishes.
monitor_hold_down_type
string
    Choices:
  • immediate
  • delay
  • time
Recovery time method when primary interface re-establishes.
monitor_hold_down_weekday
string
    Choices:
  • everyday
  • sunday
  • monday
  • tuesday
  • wednesday
  • thursday
  • friday
  • saturday
Day of the week to recover once primary re-establishes.
name
string / required
IPsec remote gateway name.
nattraversal
string
    Choices:
  • enable
  • disable
  • forced
Enable/disable NAT traversal.
negotiate_timeout
integer
IKE SA negotiation timeout in seconds (1 - 300).
net_device
string
    Choices:
  • enable
  • disable
Enable/disable kernel device creation for dialup instances.
npu_offload
string
    Choices:
  • enable
  • disable
Enable/disable offloading NPU.
passive_mode
string
    Choices:
  • enable
  • disable
Enable/disable IPsec passive mode for static tunnels.
peer
string
Accept this peer certificate. Source user.peer.name.
peergrp
string
Accept this peer certificate group. Source user.peergrp.name.
peerid
string
Accept this peer identity.
peertype
string
    Choices:
  • any
  • one
  • dialup
  • peer
  • peergrp
Accept this peer type.
ppk
string
    Choices:
  • disable
  • allow
  • require
Enable/disable IKEv2 Postquantum Preshared Key (PPK).
ppk_identity
string
IKEv2 Postquantum Preshared Key Identity.
ppk_secret
string
IKEv2 Postquantum Preshared Key (ASCII string or hexadecimal encoded with a leading 0x).
priority
integer
Priority for routes added by IKE (0 - 4294967295).
proposal
list / elements=string
    Choices:
  • des-md5
  • des-sha1
  • des-sha256
  • des-sha384
  • des-sha512
  • 3des-md5
  • 3des-sha1
  • 3des-sha256
  • 3des-sha384
  • 3des-sha512
  • aes128-md5
  • aes128-sha1
  • aes128-sha256
  • aes128-sha384
  • aes128-sha512
  • aes192-md5
  • aes192-sha1
  • aes192-sha256
  • aes192-sha384
  • aes192-sha512
  • aes256-md5
  • aes256-sha1
  • aes256-sha256
  • aes256-sha384
  • aes256-sha512
  • aria128-md5
  • aria128-sha1
  • aria128-sha256
  • aria128-sha384
  • aria128-sha512
  • aria192-md5
  • aria192-sha1
  • aria192-sha256
  • aria192-sha384
  • aria192-sha512
  • aria256-md5
  • aria256-sha1
  • aria256-sha256
  • aria256-sha384
  • aria256-sha512
  • seed-md5
  • seed-sha1
  • seed-sha256
  • seed-sha384
  • seed-sha512
Phase1 proposal.
psksecret
string
Pre-shared secret for PSK authentication (ASCII string or hexadecimal encoded with a leading 0x).
psksecret_remote
string
Pre-shared secret for remote side PSK authentication (ASCII string or hexadecimal encoded with a leading 0x).
reauth
string
    Choices:
  • disable
  • enable
Enable/disable re-authentication upon IKE SA lifetime expiration.
rekey
string
    Choices:
  • enable
  • disable
Enable/disable phase1 rekey.
remote_gw
string
IPv4 address of the remote gateway"s external interface.
remote_gw6
string
IPv6 address of the remote gateway"s external interface.
remotegw_ddns
string
Domain name of remote gateway (eg. name.DDNS.com).
rsa_signature_format
string
    Choices:
  • pkcs1
  • pss
Digital Signature Authentication RSA signature format.
save_password
string
    Choices:
  • disable
  • enable
Enable/disable saving XAuth username and password on VPN clients.
send_cert_chain
string
    Choices:
  • enable
  • disable
Enable/disable sending certificate chain.
signature_hash_alg
string
    Choices:
  • sha1
  • sha2-256
  • sha2-384
  • sha2-512
Digital Signature Authentication hash algorithms.
split_include_service
string
Split-include services. Source firewall.service.group.name firewall.service.custom.name.
state
string
    Choices:
  • present
  • absent
Deprecated
Starting with Ansible 2.9 we recommend using the top-level 'state' parameter.

Indicates whether to create or remove the object.
suite_b
string
    Choices:
  • disable
  • suite-b-gcm-128
  • suite-b-gcm-256
Use Suite-B.
tunnel_search
string
    Choices:
  • selectors
  • nexthop
Tunnel search method for when the interface is shared.
type
string
    Choices:
  • static
  • dynamic
  • ddns
Remote gateway type.
unity_support
string
    Choices:
  • disable
  • enable
Enable/disable support for Cisco UNITY Configuration Method extensions.
usrgrp
string
User group name for dialup peers. Source user.group.name.
vni
integer
VNI of VXLAN tunnel.
wizard_type
string
    Choices:
  • custom
  • dialup-forticlient
  • dialup-ios
  • dialup-android
  • dialup-windows
  • dialup-cisco
  • static-fortigate
  • dialup-fortigate
  • static-cisco
  • dialup-cisco-fw
GUI VPN Wizard Type.
xauthtype
string
    Choices:
  • disable
  • client
  • pap
  • chap
  • auto
XAuth type.

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure VPN remote gateway.
    fortios_vpn_ipsec_phase1_interface:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      vpn_ipsec_phase1_interface:
        acct_verify: "enable"
        add_gw_route: "enable"
        add_route: "disable"
        assign_ip: "disable"
        assign_ip_from: "range"
        authmethod: "psk"
        authmethod_remote: "psk"
        authpasswd: "<your_own_value>"
        authusr: "<your_own_value>"
        authusrgrp: "<your_own_value> (source user.group.name)"
        auto_discovery_forwarder: "enable"
        auto_discovery_psk: "enable"
        auto_discovery_receiver: "enable"
        auto_discovery_sender: "enable"
        auto_negotiate: "enable"
        backup_gateway:
         -
            address: "<your_own_value>"
        banner: "<your_own_value>"
        certificate:
         -
            name: "default_name_22 (source vpn.certificate.local.name)"
        childless_ike: "enable"
        client_auto_negotiate: "disable"
        client_keep_alive: "disable"
        comments: "<your_own_value>"
        default_gw: "<your_own_value>"
        default_gw_priority: "28"
        dhgrp: "1"
        digital_signature_auth: "enable"
        distance: "31"
        dns_mode: "manual"
        domain: "<your_own_value>"
        dpd: "disable"
        dpd_retrycount: "35"
        dpd_retryinterval: "<your_own_value>"
        eap: "enable"
        eap_identity: "use-id-payload"
        encap_local_gw4: "<your_own_value>"
        encap_local_gw6: "<your_own_value>"
        encap_remote_gw4: "<your_own_value>"
        encap_remote_gw6: "<your_own_value>"
        encapsulation: "none"
        encapsulation_address: "ike"
        enforce_unique_id: "disable"
        exchange_interface_ip: "enable"
        forticlient_enforcement: "enable"
        fragmentation: "enable"
        fragmentation_mtu: "49"
        group_authentication: "enable"
        group_authentication_secret: "<your_own_value>"
        ha_sync_esp_seqno: "enable"
        idle_timeout: "enable"
        idle_timeoutinterval: "54"
        ike_version: "1"
        include_local_lan: "disable"
        interface: "<your_own_value> (source system.interface.name)"
        ip_version: "4"
        ipv4_dns_server1: "<your_own_value>"
        ipv4_dns_server2: "<your_own_value>"
        ipv4_dns_server3: "<your_own_value>"
        ipv4_end_ip: "<your_own_value>"
        ipv4_exclude_range:
         -
            end_ip: "<your_own_value>"
            id:  "65"
            start_ip: "<your_own_value>"
        ipv4_name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        ipv4_netmask: "<your_own_value>"
        ipv4_split_exclude: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        ipv4_split_include: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        ipv4_start_ip: "<your_own_value>"
        ipv4_wins_server1: "<your_own_value>"
        ipv4_wins_server2: "<your_own_value>"
        ipv6_dns_server1: "<your_own_value>"
        ipv6_dns_server2: "<your_own_value>"
        ipv6_dns_server3: "<your_own_value>"
        ipv6_end_ip: "<your_own_value>"
        ipv6_exclude_range:
         -
            end_ip: "<your_own_value>"
            id:  "80"
            start_ip: "<your_own_value>"
        ipv6_name: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        ipv6_prefix: "83"
        ipv6_split_exclude: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        ipv6_split_include: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        ipv6_start_ip: "<your_own_value>"
        keepalive: "87"
        keylife: "88"
        local_gw: "<your_own_value>"
        local_gw6: "<your_own_value>"
        localid: "<your_own_value>"
        localid_type: "auto"
        mesh_selector_type: "disable"
        mode: "aggressive"
        mode_cfg: "disable"
        monitor: "<your_own_value> (source vpn.ipsec.phase1-interface.name)"
        monitor_hold_down_delay: "97"
        monitor_hold_down_time: "<your_own_value>"
        monitor_hold_down_type: "immediate"
        monitor_hold_down_weekday: "everyday"
        name: "default_name_101"
        nattraversal: "enable"
        negotiate_timeout: "103"
        net_device: "enable"
        npu_offload: "enable"
        passive_mode: "enable"
        peer: "<your_own_value> (source user.peer.name)"
        peergrp: "<your_own_value> (source user.peergrp.name)"
        peerid: "<your_own_value>"
        peertype: "any"
        ppk: "disable"
        ppk_identity: "<your_own_value>"
        ppk_secret: "<your_own_value>"
        priority: "114"
        proposal: "des-md5"
        psksecret: "<your_own_value>"
        psksecret_remote: "<your_own_value>"
        reauth: "disable"
        rekey: "enable"
        remote_gw: "<your_own_value>"
        remote_gw6: "<your_own_value>"
        remotegw_ddns: "<your_own_value>"
        rsa_signature_format: "pkcs1"
        save_password: "disable"
        send_cert_chain: "enable"
        signature_hash_alg: "sha1"
        split_include_service: "<your_own_value> (source firewall.service.group.name firewall.service.custom.name)"
        suite_b: "disable"
        tunnel_search: "selectors"
        type: "static"
        unity_support: "disable"
        usrgrp: "<your_own_value> (source user.group.name)"
        vni: "133"
        wizard_type: "custom"
        xauthtype: "disable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)