junipernetworks.junos.junos_static_route – (deprecated, removed after 2022-06-01) Manage static IP routes on Juniper JUNOS network devices¶

Note

This plugin is part of the junipernetworks.junos collection (version 1.3.0).

To install it use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_static_route.

New in version 1.0.0: of junipernetworks.junos

DEPRECATED
Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

DEPRECATED ¶

Removed in: major release after 2022-06-01
Why: Updated modules released with more functionality
Alternative: Use junipernetworks.junos.junos_static_routes instead.

Synopsis ¶

This module provides declarative management of static IP routes on Juniper JUNOS network devices.

Note

This module has a corresponding action plugin.

Requirements ¶

The below requirements are needed on the host that executes this module.

ncclient (>=v0.5.2)

Parameters ¶

Parameter		Choices/Defaults	Comments
active boolean		Choices: no yes ←	Specifies whether or not the configuration is active or deactivated
address string			Network address with prefix of the static route. aliases: prefix
aggregate list / elements=dictionary			List of static route definitions
	active boolean	Choices: no yes	Specifies whether or not the configuration is active or deactivated
	address string		Network address with prefix of the static route.
	next_hop string		Next hop IP of the static route.
	preference integer		Global admin preference of the static route. aliases: admin_distance
	qualified_next_hop string		Qualified next hop IP of the static route. Qualified next hops allow to associate preference with a particular next-hop address.
	qualified_preference integer		Assign preference for qualified next hop.
	state string	Choices: present absent	State of the static route configuration.
next_hop string			Next hop IP of the static route.
preference integer			Global admin preference of the static route. aliases: admin_distance
provider dictionary			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli` or `connection: netconf`. For more information please see the Junos OS Platform Options guide. A dict object containing connection details.
	host string		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port integer		Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for `transport=cli`) or port 830 (for `transport=netconf`) device.
	ssh_keyfile path		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: cli netconf ←	Configures the transport connection to use when connecting to the remote device.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
qualified_next_hop string			Qualified next hop IP of the static route. Qualified next hops allow to associate preference with a particular next-hop address.
qualified_preference integer			Assign preference for qualified next hop.
state string		Choices: present ← absent	State of the static route configuration.

Notes ¶

Note

This module requires the netconf system service be enabled on the remote device being managed.
Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.
Recommended connection is netconf. See the Junos OS Platform Options.
This module also works with local connections for legacy playbooks.
For information on using CLI and netconf see the Junos OS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.

Examples ¶

- name: configure static route
  junipernetworks.junos.junos_static_route:
    address: 192.168.2.0/24
    next_hop: 10.0.0.1
    preference: 10
    qualified_next_hop: 10.0.0.2
    qualified_preference: 3
    state: present

- name: delete static route
  junipernetworks.junos.junos_static_route:
    address: 192.168.2.0/24
    state: absent

- name: deactivate static route configuration
  junipernetworks.junos.junos_static_route:
    address: 192.168.2.0/24
    next_hop: 10.0.0.1
    preference: 10
    qualified_next_hop: 10.0.0.2
    qualified_preference: 3
    state: present
    active: false

- name: activate static route configuration
  junipernetworks.junos.junos_static_route:
    address: 192.168.2.0/24
    next_hop: 10.0.0.1
    preference: 10
    qualified_next_hop: 10.0.0.2
    qualified_preference: 3
    state: present
    active: true

- name: Configure static route using aggregate
  junipernetworks.junos.junos_static_route:
    aggregate:
    - {address: 4.4.4.0/24, next_hop: 3.3.3.3, qualified_next_hop: 5.5.5.5, qualified_preference: 30}
    - {address: 5.5.5.0/24, next_hop: 6.6.6.6, qualified_next_hop: 7.7.7.7, qualified_preference: 12}
    preference: 10

- name: Delete static route using aggregate
  junipernetworks.junos.junos_static_route:
    aggregate:
    - address: 4.4.4.0/24
    - address: 5.5.5.0/24
    state: absent

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
diff.prepared string	when configuration is changed and diff option is enabled.	Configuration difference before and after applying change. Sample: [edit routing-options static] route 2.2.2.0/24 { ... } + route 4.4.4.0/24 { next-hop 3.3.3.3; qualified-next-hop 5.5.5.5 { + preference 30; } + preference 10; + }

Status ¶

This module will be removed in a major release after 2022-06-01. [deprecated]
For more information see DEPRECATED.

Authors¶

Ganesh Nalawade (@ganeshrn)