netapp.elementsw.na_elementsw_network_interfaces – NetApp Element Software Configure Node Network Interfaces

Note

This plugin is part of the netapp.elementsw collection (version 20.11.0).

To install it use: ansible-galaxy collection install netapp.elementsw.

To use it in a playbook, specify: netapp.elementsw.na_elementsw_network_interfaces.

New in version 2.7.0: of netapp.elementsw

Synopsis

  • Configure Element SW Node Network Interfaces for Bond 1G and 10G IP addresses.

  • This module does not create interfaces, it expects the interfaces to already exists and can only modify them.

  • This module cannot set or modify the method (Loopback, manual, dhcp, static).

  • This module is not idempotent and does not support check_mode.

Requirements

The below requirements are needed on the host that executes this module.

  • The modules were developed with SolidFire 10.1

  • solidfire-sdk-python (1.1.0.92) or greater. Install using ‘pip install solidfire-sdk-python’

Parameters

Parameter Choices/Defaults Comments
bond_10g
dictionary
settings for the Bond10G interface.
address
string
IP address for the interface.
bond_lacp_rate
string
    Choices:
  • Fast
  • Slow
Link Aggregation Control Protocol - useful only if LACP is selected as the Bond Mode.
Slow - Packets are transmitted at 30 second intervals.
Fast - Packets are transmitted in 1 second intervals.
bond_mode
string
    Choices:
  • ActivePassive
  • ALB
  • LACP
Bonding mode.
dns_nameservers
list / elements=string
List of addresses for domain name servers.
dns_search
list / elements=string
List of DNS search domains.
gateway
string
IP router network address to send packets out of the local network.
mtu
string
The largest packet size (in bytes) that the interface can transmit..
Must be greater than or equal to 1500 bytes.
netmask
string
subnet mask for the interface.
virtual_network_tag
string
The virtual network identifier of the interface (VLAN tag).
bond_1g
dictionary
settings for the Bond1G interface.
address
string
IP address for the interface.
bond_lacp_rate
string
    Choices:
  • Fast
  • Slow
Link Aggregation Control Protocol - useful only if LACP is selected as the Bond Mode.
Slow - Packets are transmitted at 30 second intervals.
Fast - Packets are transmitted in 1 second intervals.
bond_mode
string
    Choices:
  • ActivePassive
  • ALB
  • LACP
Bonding mode.
dns_nameservers
list / elements=string
List of addresses for domain name servers.
dns_search
list / elements=string
List of DNS search domains.
gateway
string
IP router network address to send packets out of the local network.
mtu
string
The largest packet size (in bytes) that the interface can transmit..
Must be greater than or equal to 1500 bytes.
netmask
string
subnet mask for the interface.
virtual_network_tag
string
The virtual network identifier of the interface (VLAN tag).
bond_mode_10g
string
deprecated, use bond_10g option.
bond_mode_1g
string
deprecated, use bond_1g option.
dns_nameservers
list / elements=string
deprecated, use bond_1g and bond_10g options.
dns_search_domains
list / elements=string
deprecated, use bond_1g and bond_10g options.
gateway_address_10g
string
deprecated, use bond_10g option.
gateway_address_1g
string
deprecated, use bond_1g option.
hostname
string / required
The hostname or IP address of the SolidFire cluster.
For na_elementsw_cluster, the Management IP (MIP) or hostname of the node to initiate the cluster creation from.
ip_address_10g
string
deprecated, use bond_10g option.
ip_address_1g
string
deprecated, use bond_1g option.
lacp_10g
string
deprecated, use bond_10g option.
lacp_1g
string
deprecated, use bond_1g option.
method
string
deprecated, this option would trigger a 'updated failed' error
mtu_10g
string
deprecated, use bond_10g option.
mtu_1g
string
deprecated, use bond_1g option.
password
string / required
Password for the specified user.

aliases: pass
subnet_10g
string
deprecated, use bond_10g option.
subnet_1g
string
deprecated, use bond_1g option.
username
string / required
Please ensure that the user has the adequate permissions. For more information, please read the official documentation https://mysupport.netapp.com/documentation/docweb/index.html?productID=62636&language=en-US.

aliases: user
virtual_network_tag
string
deprecated, use bond_1g and bond_10g options.

Notes

Note

  • The modules prefixed with na\_elementsw are built to support the SolidFire storage platform.

Examples

- name: Set Node network interfaces configuration for Bond 1G and 10G properties
  tags:
  - elementsw_network_interfaces
  na_elementsw_network_interfaces:
    hostname: "{{ elementsw_hostname }}"
    username: "{{ elementsw_username }}"
    password: "{{ elementsw_password }}"
    bond_1g:
      address: 10.253.168.131
      netmask: 255.255.248.0
      gateway: 10.253.168.1
      mtu: '1500'
      bond_mode: ActivePassive
      dns_nameservers: dns1,dns2
      dns_search: domain1,domain2
    bond_10g:
      address: 10.253.1.202
      netmask: 255.255.255.192
      gateway: 10.253.1.193
      mtu: '9000'
      bond_mode: LACP
      bond_lacp_rate: Fast
      virtual_network_tag: vnet_tag

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
msg
string
success
Success message



Authors