netapp.ontap.na_ontap_ntfs_dacl – NetApp Ontap create, delate or modify NTFS DACL (discretionary access control list)

Note

This plugin is part of the netapp.ontap collection (version 20.12.0).

To install it use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_ntfs_dacl.

New in version 20.4.0: of netapp.ontap

Synopsis

  • Create, modify, or destroy a NTFS DACL

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.

  • REST support requires ONTAP 9.6 or later.

  • Ansible 2.6

  • Ansible 2.9 or later is strongly recommended as it enables the new collection delivery system.

  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’

  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’

  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.

  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
access_type
string / required
    Choices:
  • allow
  • deny
Specifies DACL ACE's access type. Possible values.
account
string / required
Specifies DACL ACE's SID or domain account name of NTFS security descriptor.
advanced_access_rights
list / elements=string
    Choices:
  • read_data
  • write_data
  • append_data
  • read_ea
  • write_ea
  • execute_file
  • delete_child
  • read_attr
  • write_attr
  • delete
  • read_perm
  • write_perm
  • write_owner
  • full_control
Specifies DACL ACE's Advanced access rights. Mutually exclusive with rights.
apply_to
list / elements=string
    Choices:
  • this_folder
  • sub_folders
  • files
Specifies apply DACL entry.
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
rights
string
    Choices:
  • no_access
  • full_control
  • modify
  • read_and_execute
  • read
  • write
Specifies DACL ACE's access rights. Mutually exclusive with advanced_access_rights.
security_descriptor
string / required
Specifies the NTFS security descriptor.
state
string
    Choices:
  • present ←
  • absent
Whether the specified NTFS DACL should exist or not.
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
vserver
string / required
Specifies the vserver for the NTFS DACL.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: Add NTFS DACL
  na_ontap_ntfs_dacl:
    state: present
    vserver: SVM1
    security_descriptor: ansible_sd
    access_type: allow
    account: DOMAIN\Account
    rights: modify
    hostname: "{{ hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"


- name: Modify NTFS DACL
  na_ontap_ntfs_dacl:
    state: present
    vserver: SVM1
    security_descriptor: ansible_sd
    access_type: full_control
    account: DOMAIN\Account
    rights: modify
    hostname: "{{ hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"

- name: Remove NTFS DACL
  na_ontap_ntfs_dacl:
    state: absent
    vserver: SVM1
    security_descriptor: ansible_sd
    account: DOMAIN\Account
    hostname: "{{ hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"

Authors