junipernetworks.junos.junos_vrf module – Manage the VRF definitions on Juniper JUNOS devices
Note
This module is part of the junipernetworks.junos collection (version 9.1.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install junipernetworks.junos
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: junipernetworks.junos.junos_vrf
.
New in junipernetworks.junos 1.0.0
Synopsis
This module provides declarative management of VRF definitions on Juniper JUNOS devices. It allows playbooks to manage individual or the entire VRF collection.
Requirements
The below requirements are needed on the host that executes this module.
ncclient (>=v0.5.2)
Parameters
Parameter |
Comments |
---|---|
Specifies whether or not the configuration is active or deactivated Choices:
|
|
The set of VRF definition objects to be configured on the remote JUNOS device. Ths list entries can either be the VRF name or a hash of VRF definitions and attributes. This argument is mutually exclusive with the |
|
Specifies whether or not the configuration is active or deactivated Choices:
|
|
Provides a short description of the VRF definition in the current active configuration. The VRF definition value accepts alphanumeric characters used to provide additional information about the VRF. |
|
Identifies the set of interfaces that should be configured in the VRF. Interfaces must be routed interfaces in order to be placed into a VRF. |
|
The name of the VRF definition to be managed on the remote IOS device. The VRF definition name is an ASCII string name used to uniquely identify the VRF. This argument is mutually exclusive with the |
|
The router-distinguisher value uniquely identifies the VRF to routing processes on the remote IOS system. The RD value takes the form of |
|
Configures the state of the VRF definition as it relates to the device operational configuration. When set to present, the VRF should be configured in the device active configuration and when set to absent the VRF should not be in the device active configuration Choices:
|
|
Causes JUNOS to allocate a VPN label per VRF rather than per VPN FEC. This allows for forwarding of traffic to directly connected subnets, COS Egress filtering etc. Choices:
|
|
It configures VRF target community configuration. The target value takes the form of |
|
Provides a short description of the VRF definition in the current active configuration. The VRF definition value accepts alphanumeric characters used to provide additional information about the VRF. |
|
Identifies the set of interfaces that should be configured in the VRF. Interfaces must be routed interfaces in order to be placed into a VRF. |
|
The name of the VRF definition to be managed on the remote IOS device. The VRF definition name is an ASCII string name used to uniquely identify the VRF. This argument is mutually exclusive with the |
|
The router-distinguisher value uniquely identifies the VRF to routing processes on the remote IOS system. The RD value takes the form of |
|
Configures the state of the VRF definition as it relates to the device operational configuration. When set to present, the VRF should be configured in the device active configuration and when set to absent the VRF should not be in the device active configuration Choices:
|
|
Causes JUNOS to allocate a VPN label per VRF rather than per VPN FEC. This allows for forwarding of traffic to directly connected subnets, COS Egress filtering etc. Choices:
|
|
It configures VRF target community configuration. The target value takes the form of |
Notes
Note
This module requires the netconf system service be enabled on the remote device being managed.
Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.
Recommended connection is
netconf
. See the Junos OS Platform Options.This module also works with
local
connections for legacy playbooks.For information on using CLI and netconf see the :ref:`Junos OS Platform Options guide <junos_platform_options>`
For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`
For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.
Examples
- name: Configure vrf configuration
junipernetworks.junos.junos_vrf:
name: test-1
description: test-vrf-1
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 192.0.2.1:10
target: target:65514:113
state: present
- name: Remove vrf configuration
junipernetworks.junos.junos_vrf:
name: test-1
description: test-vrf-1
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 192.0.2.1:10
target: target:65514:113
state: absent
- name: Deactivate vrf configuration
junipernetworks.junos.junos_vrf:
name: test-1
description: test-vrf-1
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 192.0.2.1:10
target: target:65514:113
active: false
- name: Activate vrf configuration
junipernetworks.junos.junos_vrf:
name: test-1
description: test-vrf-1
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 192.0.2.1:10
target: target:65514:113
active: true
- name: Create vrf using aggregate
junipernetworks.junos.junos_vrf:
aggregate:
- name: test-1
description: test-vrf-1
interfaces:
- ge-0/0/3 - ge-0/0/2
rd: 192.0.2.1:10
target: target:65514:113
- name: test-2
description: test-vrf-2
interfaces:
- ge-0/0/4
- ge-0/0/5
rd: 192.0.2.2:10
target: target:65515:114
state: present
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Configuration difference before and after applying change. Returned: when configuration is changed and diff option is enabled. Sample: |