New in Ansible 1.5, “Vault” is a feature of ansible that allows keeping sensitive data such as passwords or keys in encrypted files, rather than as plaintext in your playbooks or roles. These vault files can then be distributed or placed in source control.
To enable this feature, a command line tool - ansible-vault - is used to edit files, and a command line flag (
--vault-password-file) is used. Alternately, you may specify the location of a password file or command Ansible to always prompt for the password in your ansible.cfg file. These options require no command line flag usage.
For best practices advice, refer to Variables and Vaults.
The vault feature can encrypt any structured data file used by Ansible. This can include “group_vars/” or “host_vars/” inventory variables, variables loaded by “include_vars” or “vars_files”, or variable files passed on the ansible-playbook command line with “-e @file.yml” or “-e @file.json”. Role variables and defaults are also included!
Ansible tasks, handlers, and so on are also data so these can be encrypted with vault as well. To hide the names of variables that you’re using, you can encrypt the task files in their entirety. However, that might be a little too much and could annoy your coworkers :)
The vault feature can also encrypt arbitrary files, even binary files. If a vault-encrypted file is given as the ‘src’ argument to the copy, template, unarchive, script or assemble modules, the file will be placed at the destination on the target host decrypted (assuming a valid vault password is supplied when running the play).
As of version 2.3, Ansible also supports encrypting single values inside a YAML file, using the !vault tag to let YAML and Ansible know it uses special processing. This feature is covered in more details below.
To create a new encrypted data file, run the following command:
ansible-vault create foo.yml
First you will be prompted for a password. The password used with vault currently must be the same for all files you wish to use together at the same time.
After providing a password, the tool will launch whatever editor you have defined with $EDITOR, and defaults to vi (before 2.1 the default was vim). Once you are done with the editor session, the file will be saved as encrypted data.
The default cipher is AES (which is shared-secret based).
To edit an encrypted file in place, use the ansible-vault edit command. This command will decrypt the file to a temporary file and allow you to edit the file, saving it back when done and removing the temporary file:
ansible-vault edit foo.yml
Should you wish to change your password on a vault-encrypted file or files, you can do so with the rekey command:
ansible-vault rekey foo.yml bar.yml baz.yml
This command can rekey multiple data files at once and will ask for the original password and also the new password.
If you have existing files that you wish to encrypt, use the ansible-vault encrypt command. This command can operate on multiple files at once:
ansible-vault encrypt foo.yml bar.yml baz.yml
If you have existing files that you no longer want to keep encrypted, you can permanently decrypt them by running the ansible-vault decrypt command. This command will save them unencrypted to the disk, so be sure you do not want ansible-vault edit instead:
ansible-vault decrypt foo.yml bar.yml baz.yml
Available since Ansible 1.8
If you want to view the contents of an encrypted file without editing it, you can use the ansible-vault view command:
ansible-vault view foo.yml bar.yml baz.yml
To encrypt a string provided as a cli arg:
ansible-vault encrypt_string --vault-id a_password_file 'foobar' --name 'the_secret'
some_foo: !vault | $ANSIBLE_VAULT;1.1;AES256 62313365396662343061393464336163383764373764613633653634306231386433626436623361 6134333665353966363534333632666535333761666131620a663537646436643839616531643561 63396265333966386166373632626539326166353965363262633030333630313338646335303630 3438626666666137650a353638643435666633633964366338633066623234616432373231333331 6564
To use a vault-id label for ‘dev’ vault-id:
ansible-vault encrypt_string --vault-id [email protected] 'foooodev' --name 'the_dev_secret'
the_dev_secret: !vault | $ANSIBLE_VAULT;1.2;AES256;dev 30613233633461343837653833666333643061636561303338373661313838333565653635353162 3263363434623733343538653462613064333634333464660a663633623939393439316636633863 61636237636537333938306331383339353265363239643939666639386530626330633337633833 6664656334373166630a363736393262666465663432613932613036303963343263623137386239 6330
To encrypt a string read from stdin and name it ‘db_password’:
echo 'letmein' | ansible-vault encrypt_string --vault-id [email protected] --stdin-name 'db_password'
Reading plaintext input from stdin. (ctrl-d to end input) db_password: !vault | $ANSIBLE_VAULT;1.2;AES256;dev 61323931353866666336306139373937316366366138656131323863373866376666353364373761 3539633234313836346435323766306164626134376564330a373530313635343535343133316133 36643666306434616266376434363239346433643238336464643566386135356334303736353136 6565633133366366360a326566323363363936613664616364623437336130623133343530333739 3039
To be prompted for a string to encrypt, encrypt it, and give it the name ‘new_user_password’:
ansible-vault encrypt_string --vault-id [email protected]/password --stdin-name 'new_user_password'
Reading plaintext input from stdin. (ctrl-d to end input)
User enters ‘hunter42’ and hits ctrl-d.
new_user_password: !vault | $ANSIBLE_VAULT;1.2;AES256;dev 37636561366636643464376336303466613062633537323632306566653533383833366462366662 6565353063303065303831323539656138653863353230620a653638643639333133306331336365 62373737623337616130386137373461306535383538373162316263386165376131623631323434 3866363862363335620a376466656164383032633338306162326639643635663936623939666238 3161
See also Single Encrypted Variable
Available since Ansible 2.4
A vault id is an identifier for one or more vault secrets. Since Ansible 2.4, Ansible supports multiple vault passwords. Vault ids is a way to provide a label for a particular vault password.
Vault encrypted content can specify which vault id it was encrypted with.
Prior to Ansible 2.4, only one vault password could be used at a time. Post Ansible 2.4, multiple vault passwords can be used each time Ansible runs, so any vault files or vars that needed to be decrypted all had to use the same password.
Since Ansible 2.4, vault files or vars can be that are encrypted with different passwords can be used at the same time.
For example, a playbook can now include a vars file encrypted with a ‘dev’ vault id and a ‘prod’ vault id.
Since Ansible 2.4, the recommended way to provide a vault password from the cli is
to use the
--vault-id cli option.
For example, to use a password store in the text file
ansible-playbook --vault-id /path/to/my/vault-password-file site.yml
To prompt for a password:
ansible-playbook --vault-id @prompt site.yml
To get the password from a vault password executable script
ansible-playbook --vault-id my-vault-password.py
The value for
--vault-id can specify the type of vault id (prompt, a file path, etc)
and a label for the vault id (‘dev’, ‘prod’, ‘cloud’, etc)
For example, to use a password file
dev-password for the vault-id ‘dev’:
To prompt for the ‘dev’ vault id:
Prior to Ansible 2.4
To be prompted for a vault password, use the
--ask-vault-pass cli option:
ansible-playbook --ask-vault-pass site.yml
To specify a vault password in a text file ‘dev-password’, use the
ansible-playbook --vault-password-file dev-password site.yml
Since Ansible 2.4 and later support using multiple vault passwords,
be provided multiple times.
If multiple vault passwords are provided, by default Ansible will attempt to decrypt vault content by trying each vault secret in the order they were provided on the command line.
For example, to use a ‘dev’ password read from a file and to be prompted for the ‘prod’ password:
In the above case, the ‘dev’ password will be tried first, then the ‘prod’ password for cases where Ansible doesn’t know which vault id is used to encrypt something.
If the vault content was encrypted using a
--vault-id option, then the label of the
vault id is stored with the vault content. When Ansible knows the right vault-id, it will try
the matching vault id’s secret first before trying the rest of the vault-ids.
There is a config option (DEFAULT_VAULT_ID_MATCH ) to force the vault content’s vault id label to match with one of the provided vault ids. But the default is to try the matching id first, then try the other vault ids in order.
There is also a config option (DEFAULT_VAULT_IDENTITY_LIST) to specify a default list of vault ids to use. For example, instead of requiring the cli option on every use, the (DEFAULT_VAULT_IDENTITY_LIST) config option can be used:
Prior to Ansible 2.4, only one vault password could be used in each Ansible run. The
--vault-id option is not support prior to Ansible 2.4.
By default, Ansible uses PyCrypto to encrypt and decrypt vault files. If you have many encrypted files, decrypting them at startup may cause a perceptible delay. To speed this up, install the cryptography package:
pip install cryptography
A vault encrypted file is a UTF-8 encoded txt file.
The file format includes a new line terminated header.
The header contains the vault format id, the vault format version, and a cipher id, seperated by semi-colons ‘;’
The first field
$ANSIBLE_VAULT is the format id. Currently
$ANSIBLE_VAULT is the only valid file format id. This is used to identify files that are vault encrypted (via vault.is_encrypted_file()).
The second field (1.1) is the vault format version. All supported versions of ansible will currently default to ‘1.1’.
The ‘1.0’ format is supported for reading only (and will be converted automatically to the ‘1.1’ format on write). The format version is currently used as an exact string compare only (version numbers are not currently ‘compared’).
The third field (
AES256) identifies the cipher algorithmn used to encrypt the data. Currently, the only supported cipher is ‘AES256’. [vault format 1.0 used ‘AES’, but current code always uses ‘AES256’]
Note: In the future, the header could change. Anything after the vault id and version can be considered to depend on the vault format version. This includes the cipher id, and any additional fields that could be after that.
The rest of the content of the file is the ‘vaulttext’. The vaulttext is a text armored version of the encrypted ciphertext. Each line will be 80 characters wide, except for the last line which may be shorter.
The vaulttext is a concatenation of the ciphertext and a SHA256 digest with the result ‘hexlifyied’.
‘hexlify’ refers to the hexlify() method of pythons binascii module.
hexlify()’ied result of:
hexlify()’ed string of the salt, followed by a newline (‘n’)
hexlify()’ed string of the crypted HMAC, followed by a newline. The HMAC is:
- AES256 encrypted data. The data is encrypted using:
- AES-CTR stream cipher
- a 128 bit counter block seeded from an integer iv
- the plaintext
- the original plaintext
- padding up to the AES256 blocksize. (The data used for padding is based on RFX5652 <https://tools.ietf.org/html/rfc5652#section-6.3>)