bigip_device_license – Manage license installation and activation on BIG-IP devices

New in version 2.6.

Synopsis

  • Manage license installation and activation on a BIG-IP.

Requirements

The below requirements are needed on the host that executes this module.

  • f5-sdk >= 3.0.16

Parameters

Parameter Choices/Defaults Comments
accept_eula
boolean
    Choices:
  • no
  • yes
Declares whether you accept the BIG-IP EULA or not. By default, this value is no. You must specifically declare that you have viewed and accepted the license. This module will not present you with that EULA though, so it is incumbent on you to read it.
The EULA can be found here; https://support.f5.com/csp/article/K12902.
This parameter is not required when state is absent and will be ignored if it is provided.
license_key
-
The registration key to use to license the BIG-IP.
This parameter is required if the state is equal to present.
This parameter is not required when state is absent and will be ignored if it is provided.
license_server
-
Default:
"activate.f5.com"
The F5 license server to use when getting a license and validating a dossier.
This parameter is required if the state is equal to present.
This parameter is not required when state is absent and will be ignored if it is provided.
password
- / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
provider
-
added in 2.5
Default:
null
A dict object containing connection details.
password
- / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
- / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
-
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
ssh_keyfile
-
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports.
You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE.
timeout
-
Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
- / required
    Choices:
  • rest
  • cli ←
Configures the transport connection to use when connecting to the remote device.
user
- / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
server
- / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
-
added in 2.2
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
state
-
    Choices:
  • absent
  • present ←
The state of the license on the system.
When present, only guarantees that a license is there.
When latest, ensures that the license is always valid.
When absent, removes the license on the system.
user
- / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
added in 2.0
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.

Notes

Note

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires the f5-sdk Python package on the host. This is as easy as pip install f5-sdk.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: License BIG-IP using a key
  bigip_device_license:
    license_key: "XXXXX-XXXXX-XXXXX-XXXXX-XXXXXXX"
    provider:
      server: "lb.mydomain.com"
      user: "admin"
      password: "secret"
  delegate_to: localhost

- name: Remove the license from the system
  bigip_device_license:
    state: "absent"
    provider:
      server: "lb.mydomain.com"
      user: "admin"
      password: "secret"
  delegate_to: localhost

Status

Authors

  • Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.