bigip_vcmp_guest – Manages vCMP guests on a BIG-IP¶

New in version 2.5.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Manages vCMP guests on a BIG-IP. This functionality only exists on actual hardware and must be enabled by provisioning vcmp with the bigip_provision module.

Requirements ¶

The below requirements are needed on the host that executes this module.

f5-sdk >= 3.0.16

Parameters ¶

Parameter		Choices/Defaults	Comments
allowed_slots - added in 2.7			Contains those slots that the guest is allowed to be assigned to. When the host determines which slots this guest should be assigned to, only slots in this list will be considered. This is a good way to force guests to be assigned only to particular slots, or, by configuring disjoint `allowed_slots` on two guests, that those guests are never assigned to the same slot. By default this list includes every available slot in the cluster. This means, by default, the guest may be assigned to any slot.
cores_per_slot -			Specifies the number of cores that the system allocates to the guest. Each core represents a portion of CPU and memory. Therefore, the amount of memory allocated per core is directly tied to the amount of CPU. This amount of memory varies per hardware platform type. The number you can specify depends on the type of hardware you have. In the event of a reboot, the system persists the guest to the same slot on which it ran prior to the reboot.
delete_virtual_disk boolean		Choices: no ← yes	When `state` is `absent`, will additionally delete the virtual disk associated with the vCMP guest. By default, this value is `no`.
initial_image -			Specifies the base software release ISO image file for installing the TMOS hypervisor instance and any licensed BIG-IP modules onto the guest's virtual disk. When creating a new guest, this parameter is required.
mgmt_address -			Specifies the IP address, and subnet or subnet mask that you use to access the guest when you want to manage a module running within the guest. This parameter is required if the `mgmt_network` parameter is `bridged`. When creating a new guest, if you do not specify a network or network mask, a default of `/24` (`255.255.255.0`) will be assumed.
mgmt_network -		Choices: bridged isolated host only	Specifies the method by which the management address is used in the vCMP guest. When `bridged`, specifies that the guest can communicate with the vCMP host's management network. When `isolated`, specifies that the guest is isolated from the vCMP host's management network. In this case, the only way that a guest can communicate with the vCMP host is through the console port or through a self IP address on the guest that allows traffic through port 22. When `host only`, prevents the guest from installing images and hotfixes other than those provided by the hypervisor. If the guest setting is `isolated` or `host only`, the `mgmt_address` does not apply. Concerning mode changing, changing `bridged` to `isolated` causes the vCMP host to remove all of the guest's management interfaces from its bridged management network. This immediately disconnects the guest's VMs from the physical management network. Changing `isolated` to `bridged` causes the vCMP host to dynamically add the guest's management interfaces to the bridged management network. This immediately connects all of the guest's VMs to the physical management network. Changing this property while the guest is in the `configured` or `provisioned` state has no immediate effect.
mgmt_route -			Specifies the gateway address for the `mgmt_address`. If this value is not specified when creating a new guest, it is set to `none`. The value `none` can be used during an update to remove this value.
min_number_of_slots - added in 2.7			Specifies the minimum number of slots that the guest must be assigned to in order to deploy. This field dictates the number of slots that the guest must be assigned to. If at the end of any allocation attempt the guest is not assigned to at least this many slots, the attempt fails and the change that initiated it is reverted. A guest's `min_number_of_slots` value cannot be greater than its `number_of_slots`.
name - / required			The name of the vCMP guest to manage.
number_of_slots - added in 2.7			Specifies the number of slots for the system to use for creating the guest. This value dictates how many cores a guest is allocated from each slot that it is assigned to. Possible values are dependent on the type of blades being used in this cluster. The default value depends on the type of blades being used in this cluster.
partition -		Default: "Common"	Device partition to manage resources on.
password - / required			The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
provider - added in 2.5		Default: null	A dict object containing connection details.
	password - / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server - / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port -	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	ssh_keyfile -		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable `ANSIBLE_NET_SSH_KEYFILE`.
	timeout -	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport - / required	Choices: rest cli ←	Configures the transport connection to use when connecting to the remote device.
	user - / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
server - / required			The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port - added in 2.2		Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
state -		Choices: configured disabled provisioned present ← absent	The state of the vCMP guest on the system. Each state implies the actions of all states before it. When `configured`, guarantees that the vCMP guest exists with the provided attributes. Additionally, ensures that the vCMP guest is turned off. When `disabled`, behaves the same as `configured` the name of this state is just a convenience for the user that is more understandable. When `provisioned`, will ensure that the guest is created and installed. This state will not start the guest; use `deployed` for that. This state is one step beyond `present` as `present` will not install the guest; only setup the configuration for it to be installed. When `present`, ensures the guest is properly provisioned and starts the guest so that it is in a running state. When `absent`, removes the vCMP from the system.
user - / required			The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean added in 2.0		Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
vlans -			VLANs that the guest uses to communicate with other guests, the host, and with the external network. The available VLANs in the list are those that are currently configured on the vCMP host. The order of these VLANs is not important; in fact, it's ignored. This module will order the VLANs for you automatically. Therefore, if you deliberately re-order them in subsequent tasks, you will find that this module will not register a change.

Notes ¶

Note

This module can take a lot of time to deploy vCMP guests. This is an intrinsic limitation of the vCMP system because it is booting real VMs on the BIG-IP device. This boot time is very similar in length to the time it takes to boot VMs on any other virtualization platform; public or private.
When BIG-IP starts, the VMs are booted sequentially; not in parallel. This means that it is not unusual for a vCMP host with many guests to take a long time (60+ minutes) to reboot and bring all the guests online. The BIG-IP chassis will be available before all vCMP guests are online.
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires the f5-sdk Python package on the host. This is as easy as pip install f5-sdk.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples ¶

- name: Create a vCMP guest
  bigip_vcmp_guest:
    name: foo
    password: secret
    server: lb.mydomain.com
    state: present
    user: admin
    mgmt_network: bridge
    mgmt_address: 10.20.30.40/24
  delegate_to: localhost

- name: Create a vCMP guest with specific VLANs
  bigip_vcmp_guest:
    name: foo
    password: secret
    server: lb.mydomain.com
    state: present
    user: admin
    mgmt_network: bridge
    mgmt_address: 10.20.30.40/24
    vlans:
      - vlan1
      - vlan2
  delegate_to: localhost

- name: Remove vCMP guest and disk
  bigip_vcmp_guest:
    name: guest1
    state: absent
    delete_virtual_disk: yes
  register: result

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
vlans list	changed	The VLANs assigned to the vCMP guest, in their full path format. Sample: ['/Common/vlan1', '/Common/vlan2']

Status ¶

This module is guaranteed to have no backward incompatible interface changes going forward. [stableinterface]
This module is maintained by an Ansible Partner. [certified]

Authors¶

Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

bigip_vcmp_guest – Manages vCMP guests on a BIG-IP¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶