bigip_virtual_address – Manage LTM virtual addresses on a BIG-IP¶

New in version 2.4.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Manage LTM virtual addresses on a BIG-IP.

Requirements ¶

The below requirements are needed on the host that executes this module.

f5-sdk >= 3.0.16

Parameters ¶

Parameter		Choices/Defaults	Comments
address -			Virtual address. This value cannot be modified after it is set. If you never created a virtual address, but did create virtual servers, then a virtual address for each virtual server was created automatically. The name of this virtual address is its IP address value.
arp boolean added in 2.7		Choices: no yes	Specifies whether the system accepts ARP requests. When `no`, specifies that the system does not accept ARP requests. When `yes`, then the packets are dropped. Note that both ARP and ICMP Echo must be disabled in order for forwarding virtual servers using that virtual address to forward ICMP packets. When creating a new virtual address, if this parameter is not specified, the default value is `yes`.
arp_state -		Choices: enabled disabled	Specifies whether the system accepts ARP requests. When (disabled), specifies that the system does not accept ARP requests. Note that both ARP and ICMP Echo must be disabled in order for forwarding virtual servers using that virtual address to forward ICMP packets. If (enabled), then the packets are dropped. Deprecated. Use the `arp` parameter instead. When creating a new virtual address, if this parameter is not specified, the default value is `enabled`.
auto_delete -			Specifies whether the system automatically deletes the virtual address with the deletion of the last associated virtual server. When `disabled`, specifies that the system leaves the virtual address even when all associated virtual servers have been deleted. When creating the virtual address, the default value is `enabled`. `enabled` and `disabled` are deprecated and will be removed in Ansible 2.11. Instead, use known Ansible booleans such as `yes` and `no`
availability_calculation - added in 2.6		Choices: always when_all_available when_any_available	Specifies what routes of the virtual address the system advertises. When `when_any_available`, advertises the route when any virtual server is available. When `when_all_available`, advertises the route when all virtual servers are available. When (always), always advertises the route regardless of the virtual servers available. aliases: advertise_route
connection_limit -			Specifies the number of concurrent connections that the system allows on this virtual address.
icmp_echo -		Choices: enabled disabled selective	Specifies how the systems sends responses to (ICMP) echo requests on a per-virtual address basis for enabling route advertisement. When `enabled`, the BIG-IP system intercepts ICMP echo request packets and responds to them directly. When `disabled`, the BIG-IP system passes ICMP echo requests through to the backend servers. When (selective), causes the BIG-IP system to internally enable or disable responses based on virtual server state; `when_any_available`, `when_all_available, or C(always`, regardless of the state of any virtual servers.
name - added in 2.6			Name of the virtual address. If this parameter is not provided, then the value of `address` will be used.
netmask -		Default: "255.255.255.255"	Netmask of the provided virtual address. This value cannot be modified after it is set.
partition - added in 2.5		Default: "Common"	Device partition to manage resources on.
password - / required			The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
provider - added in 2.5		Default: null	A dict object containing connection details.
	password - / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server - / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port -	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	ssh_keyfile -		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable `ANSIBLE_NET_SSH_KEYFILE`.
	timeout -	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport - / required	Choices: rest cli ←	Configures the transport connection to use when connecting to the remote device.
	user - / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
route_advertisement - added in 2.6		Choices: disabled enabled always selective any all	Specifies whether the system uses route advertisement for this virtual address. When disabled, the system does not advertise routes for this virtual address. The majority of these options are only supported on versions 13.0.0-HF1 or higher. On versions less than this, all choices expect `disabled` will translate to `enabled`. When `always`, the BIG-IP system will always advertise the route for the virtual address, regardless of availability status. This requires an `enabled` virtual address. When `enabled`, the BIG-IP system will advertise the route for the available virtual address, based on the calculation method in the availability calculation. When `disabled`, the BIG-IP system will not advertise the route for the virtual address, regardless of the availability status. When `selective`, you can also selectively enable ICMP echo responses, which causes the BIG-IP system to internally enable or disable responses based on virtual server state. Either `any` virtual server, `all` virtual servers, or `always`, regardless of the state of any virtual server. When `any`, the BIG-IP system will advertise the route for the virtual address when any virtual server is available. When `all`, the BIG-IP system will advertise the route for the virtual address when all virtual servers are available.
route_domain - added in 2.6			The route domain of the `address` that you want to use. This value cannot be modified after it is set.
server - / required			The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port - added in 2.2		Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
spanning boolean added in 2.7		Choices: no yes	Enables all BIG-IP systems in a device group to listen for and process traffic on the same virtual address. Spanning for a virtual address occurs when you enable the `spanning` option on a device and then sync the virtual address to the other members of the device group. Spanning also relies on the upstream router to distribute application flows to the BIG-IP systems using ECMP routes. ECMP defines a route to the virtual address using distinct Floating self-IP addresses configured on each BIG-IP system. You must also configure MAC masquerade addresses and disable `arp` on the virtual address when Spanning is enabled. When creating a new virtual address, if this parameter is not specified, the default valus is `no`.
state -		Choices: present ← absent enabled disabled	The virtual address state. If `absent`, an attempt to delete the virtual address will be made. This will only succeed if this virtual address is not in use by a virtual server. `present` creates the virtual address and enables it. If `enabled`, enable the virtual address if it exists. If `disabled`, create the virtual address if needed, and set state to `disabled`.
traffic_group - added in 2.5			The traffic group for the virtual address. When creating a new address, if this value is not specified, the default of `/Common/traffic-group-1` will be used.
use_route_advertisement boolean		Choices: no yes	Specifies whether the system uses route advertisement for this virtual address. When disabled, the system does not advertise routes for this virtual address. Deprecated. Use the `route_advertisement` parameter instead.
user - / required			The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean added in 2.0		Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.

Notes ¶

Note

For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires the f5-sdk Python package on the host. This is as easy as pip install f5-sdk.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples ¶

- name: Add virtual address
  bigip_virtual_address:
    server: lb.mydomain.net
    user: admin
    password: secret
    state: present
    partition: Common
    address: 10.10.10.10
  delegate_to: localhost

- name: Enable route advertisement on the virtual address
  bigip_virtual_address:
    server: lb.mydomain.net
    user: admin
    password: secret
    state: present
    address: 10.10.10.10
    use_route_advertisement: yes
  delegate_to: localhost

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
address integer	created	The address of the virtual address. Sample: 2345
arp boolean	changed	The new way the virtual address handles ARP requests. Sample: True
auto_delete string	changed	New setting for auto deleting virtual address. Sample: enabled
connection_limit integer	changed	The new connection limit of the virtual address. Sample: 1000
icmp_echo string	changed	New ICMP echo setting applied to virtual address. Sample: disabled
netmask integer	created	The netmask of the virtual address. Sample: 2345
spanning string	changed	Whether spanning is enabled or not Sample: disabled
state string	changed	The new state of the virtual address. Sample: disabled
use_route_advertisement boolean	changed	The new setting for whether to use route advertising or not. Sample: True

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by an Ansible Partner. [certified]

Authors¶

Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

bigip_virtual_address – Manage LTM virtual addresses on a BIG-IP¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶