bigip_vlan – Manage VLANs on a BIG-IP system¶

New in version 2.2.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Manage VLANs on a BIG-IP system

Requirements ¶

The below requirements are needed on the host that executes this module.

f5-sdk >= 3.0.16

Parameters ¶

Parameter		Choices/Defaults	Comments
cmp_hash - added in 2.5		Choices: default destination-address source-address dst-ip src-ip dest destination source dst src	Specifies how the traffic on the VLAN will be disaggregated. The value selected determines the traffic disaggregation method. You can choose to disaggregate traffic based on `source-address` (the source IP address), `destination-address` (destination IP address), or `default`, which specifies that the default CMP hash uses L4 ports. When creating a new VLAN, if this parameter is not specified, the default of `default` is used.
dag_round_robin boolean added in 2.5		Choices: no yes	Specifies whether some of the stateless traffic on the VLAN should be disaggregated in a round-robin order instead of using a static hash. The stateless traffic includes non-IP L2 traffic, ICMP, some UDP protocols, and so on. When creating a new VLAN, if this parameter is not specified, the default of (no) is used.
dag_tunnel - added in 2.5		Choices: inner outer	Specifies how the disaggregator (DAG) distributes received tunnel-encapsulated packets to TMM instances. Select `inner` to distribute packets based on information in inner headers. Select `outer` to distribute packets based on information in outer headers without inspecting inner headers. When creating a new VLAN, if this parameter is not specified, the default of `outer` is used. This parameter is not supported on Virtual Editions of BIG-IP.
description -			The description to give to the VLAN.
mtu - added in 2.5			Specifies the maximum transmission unit (MTU) for traffic on this VLAN. When creating a new VLAN, if this parameter is not specified, the default value used will be `1500`. This number must be between 576 to 9198.
name - / required			The VLAN to manage. If the special VLAN `ALL` is specified with the `state` value of `absent` then all VLANs will be removed.
partition - added in 2.5		Default: "Common"	Device partition to manage resources on.
password - / required			The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
provider - added in 2.5		Default: null	A dict object containing connection details.
	password - / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server - / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port -	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	ssh_keyfile -		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable `ANSIBLE_NET_SSH_KEYFILE`.
	timeout -	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport - / required	Choices: rest cli ←	Configures the transport connection to use when connecting to the remote device.
	user - / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
server - / required			The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port - added in 2.2		Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
state -		Choices: absent present ←	The state of the VLAN on the system. When `present`, guarantees that the VLAN exists with the provided attributes. When `absent`, removes the VLAN from the system.
tag -			Tag number for the VLAN. The tag number can be any integer between 1 and 4094. The system automatically assigns a tag number if you do not specify a value.
tagged_interfaces -			Specifies a list of tagged interfaces and trunks that you want to configure for the VLAN. Use tagged interfaces or trunks when you want to assign a single interface or trunk to multiple VLANs. aliases: tagged_interface
untagged_interfaces -			Specifies a list of untagged interfaces and trunks that you want to configure for the VLAN. aliases: untagged_interface
user - / required			The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean added in 2.0		Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.

Notes ¶

Note

Requires BIG-IP versions >= 12.0.0
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires the f5-sdk Python package on the host. This is as easy as pip install f5-sdk.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples ¶

- name: Create VLAN
  bigip_vlan:
      name: "net1"
      password: "secret"
      server: "lb.mydomain.com"
      user: "admin"
      validate_certs: "no"
  delegate_to: localhost

- name: Set VLAN tag
  bigip_vlan:
      name: "net1"
      password: "secret"
      server: "lb.mydomain.com"
      tag: "2345"
      user: "admin"
      validate_certs: "no"
  delegate_to: localhost

- name: Add VLAN 2345 as tagged to interface 1.1
  bigip_vlan:
      tagged_interface: 1.1
      name: "net1"
      password: "secret"
      server: "lb.mydomain.com"
      tag: "2345"
      user: "admin"
      validate_certs: "no"
  delegate_to: localhost

- name: Add VLAN 1234 as tagged to interfaces 1.1 and 1.2
  bigip_vlan:
      tagged_interfaces:
          - 1.1
          - 1.2
      name: "net1"
      password: "secret"
      server: "lb.mydomain.com"
      tag: "1234"
      user: "admin"
      validate_certs: "no"
  delegate_to: localhost

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
cmp_hash string	changed	New traffic disaggregation method. Sample: source-address
dag_tunnel string	changed	The new DAG tunnel setting. Sample: outer
description string	changed	The description set on the VLAN. Sample: foo VLAN
interfaces list	changed	Interfaces that the VLAN is assigned to. Sample: ['1.1', '1.2']
partition string	changed	The partition that the VLAN was created on. Sample: Common
tag integer	changed	The ID of the VLAN. Sample: 2345

Status ¶

This module is guaranteed to have no backward incompatible interface changes going forward. [stableinterface]
This module is maintained by an Ansible Partner. [certified]

Authors¶

Tim Rupp (@caphrim007)
Wojciech Wypior (@wojtek0806)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

bigip_vlan – Manage VLANs on a BIG-IP system¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶