cnos_reload – Perform switch restart on devices running Lenovo CNOS¶
New in version 2.3.
Synopsis¶
- This module allows you to restart the switch using the current startup configuration. The module is usually invoked after the running configuration has been saved over the startup configuration. This module uses SSH to manage network device configuration. The results of the operation can be viewed in results directory.
Parameters¶
| Parameter | Choices/Defaults | Comments |
|---|---|---|
|
deviceType
-
/ required
added in 2.3 |
|
This specifies the type of device where the method is executed. The choices NE1072T,NE1032,NE1032T,NE10032,NE2572 are added since version 2.4.
|
|
enablePassword
-
added in 2.3 |
Configures the password used to enter Global Configuration command mode on the switch. If the switch does not request this password, the parameter is ignored.While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
|
|
|
host
-
/ required
added in 2.3 |
This is the variable used to search the hosts file at /etc/ansible/hosts and identify the IP address of the device on which the template is going to be applied. Usually the Ansible keyword {{ inventory_hostname }} is specified in the playbook as an abstraction of the group of network elements that need to be configured.
|
|
|
outputfile
-
/ required
added in 2.3 |
This specifies the file path where the output of each command execution is saved. Each command that is specified in the merged template file and each response from the device are saved here. Usually the location is the results folder, but you can choose another location based on your write permission.
|
|
|
password
-
/ required
added in 2.3 |
Configures the password used to authenticate the connection to the remote device. The value of the password parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
|
|
|
username
-
/ required
added in 2.3 |
Configures the username used to authenticate the connection to the remote device. The value of the username parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
|
Notes¶
Note
- For more information on using Ansible to manage Lenovo Network devices see https://www.ansible.com/ansible-lenovo.
Examples¶
Tasks : The following are examples of using the module cnos_reload. These are
written in the main.yml file of the tasks directory.
---
- name: Test Reload
cnos_reload:
deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
outputfile: "./results/test_reload_{{ inventory_hostname }}_output.txt"
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
|
msg
string
|
always |
Success or failure message
Sample:
Device is Reloading. Please wait...
|
Status¶
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors¶
- Anil Kumar Muraleedharan (@amuraleedhar)
Hint
If you notice any issues in this documentation you can edit this document to improve it.