na_ontap_service_processor_network – NetApp ONTAP service processor network

New in version 2.6.

Synopsis

  • Modify a ONTAP service processor network

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules were developed with Clustered Data ONTAP 9.3
  • Ansible 2.6
  • netapp-lib (2017.10.30). Install using ‘pip install netapp-lib’
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
address_type
- / required
    Choices:
  • ipv4
  • ipv6
Specify address class.
dhcp
-
    Choices:
  • v4
  • none
Specify dhcp type.
gateway_ip_address
-
Specify the gateway ip.
hostname
- / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https
ip_address
-
Specify the service processor ip address.
is_enabled
boolean / required
    Choices:
  • no
  • yes
Specify whether to enable or disable the service processor network.
netmask
-
Specify the service processor netmask.
node
- / required
The node where the service processor network should be enabled
password
- / required
Password for the specified user.

aliases: pass
prefix_length
-
Specify the service processor prefix_length.
state
-
    Choices:
  • present ←
Whether the specified service processor network should exist or not.
username
- / required
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to False, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.

Notes

Note

  • The modules prefixed with na_ontap are built to support the ONTAP storage platform.

Examples

- name: Modify Service Processor Network
  na_ontap_service_processor_network:
    state=present
    address_type=ipv4
    is_enabled=true
    dhcp=v4
    node=FPaaS-A300-01
    node={{ netapp_node }}
    username={{ netapp_username }}
    password={{ netapp_password }}
    hostname={{ netapp_hostname }}

Status

Authors

Hint

If you notice any issues in this documentation you can edit this document to improve it.