nxos_evpn_vni – Manages Cisco EVPN VXLAN Network Identifier (VNI).

New in version 2.2.

Synopsis

  • Manages Cisco Ethernet Virtual Private Network (EVPN) VXLAN Network Identifier (VNI) configurations of a Nexus device.

Parameters

Parameter Choices/Defaults Comments
provider
-
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
This option is only required if you are using NX-API.
For more information please see the NXOS Platform Options guide.
A dict object containing connection details.
auth_pass
-
added in 2.5.3
 Default:
"none"
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
boolean
added in 2.5.3
    Choices:
  • no ←
  • yes
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
host
- / required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
-
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
-
Default:
"0 (use common port)"
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
ssh_keyfile
-
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
-
added in 2.3
 Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport
- / required
Default:
"cli"
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
use_proxy
boolean
added in 2.5
    Choices:
  • no
  • yes ←
If no, the environment variables http_proxy and https_proxy will be ignored.
use_ssl
boolean
    Choices:
  • no ←
  • yes
Configures the transport to use SSL if set to true only when the transport=nxapi, otherwise this value is ignored.
username
-
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
boolean
    Choices:
  • no
  • yes
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
route_distinguisher
- / required
The VPN Route Distinguisher (RD). The RD is combined with the IPv4 or IPv6 prefix learned by the PE router to create a globally unique address.
route_target_both
-
Enables/Disables route-target settings for both import and export target communities using a single property.
route_target_export
-
Sets the route-target 'export' extended communities.
route_target_import
-
Sets the route-target 'import' extended communities.
state
-
    Choices:
  • present ←
  • absent
Determines whether the config should be present or not on the device.
vni
- / required
The EVPN VXLAN Network Identifier.

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • default, where supported, restores params default value.
  • RD override is not permitted. You should set it to the default values first and then reconfigure it.
  • route_target_both, route_target_import and route_target_export valid values are a list of extended communities, (i.e. [‘1.2.3.4:5’, ‘33:55’]) or the keywords ‘auto’ or ‘default’.
  • The route_target_both property is discouraged due to the inconsistent behavior of the property across Nexus platforms and image versions. For this reason it is recommended to use explicit route_target_export and route_target_import properties instead of route_target_both.
  • RD valid values are a string in one of the route-distinguisher formats, the keyword ‘auto’, or the keyword ‘default’.
  • For information on using CLI and NX-API see the NXOS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

- name: vni configuration
  nxos_evpn_vni:
    vni: 6000
    route_distinguisher: "60:10"
    route_target_import:
      - "5000:10"
      - "4100:100"
    route_target_export: auto
    route_target_both: default

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list
 always
commands sent to the device

Sample:
['evpn', 'vni 6000 l2', 'route-target import 5001:10']


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Gabriele Gerbino (@GGabriele)

Hint

If you notice any issues in this documentation you can edit this document to improve it.