onyx_linkagg – Manage link aggregation groups on Mellanox ONYX network devices¶

New in version 2.5.

Synopsis
Parameters
Examples
Return Values
Status

Synopsis ¶

This module provides declarative management of link aggregation groups on Mellanox ONYX network devices.

Parameters ¶

Parameter	Choices/Defaults	Comments
aggregate -		List of link aggregation definitions.
members - / required		List of members interfaces of the link aggregation group. The value can be single interface or list of interfaces.
mode -	Choices: on active passive Default: "yes"	Mode of the link aggregation group. A value of `on` will enable LACP. `active` configures the link to actively information about the state of the link, or it can be configured in `passive` mode ie. send link state information only when received them from another link.
name - / required		Name of the link aggregation group.
purge boolean	Choices: no ← yes	Purge link aggregation groups not defined in the aggregate parameter.
state -	Choices: present ← absent up down	State of the link aggregation group.

Examples ¶

- name: configure link aggregation group
  onyx_linkagg:
    name: Po1
    members:
      - Eth1/1
      - Eth1/2

- name: remove configuration
  onyx_linkagg:
    name: Po1
    state: absent

- name: Create aggregate of linkagg definitions
  onyx_linkagg:
    aggregate:
        - { name: Po1, members: [Eth1/1] }
        - { name: Po2, members: [Eth1/2] }

- name: Remove aggregate of linkagg definitions
  onyx_linkagg:
    aggregate:
      - name: Po1
      - name: Po2
    state: absent

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always.	The list of configuration mode commands to send to the device Sample: ['interface port-channel 1', 'exit', 'interface ethernet 1/1 channel-group 1 mode on', 'interface ethernet 1/2 channel-group 1 mode on']

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors¶

Samer Deeb (@samerd)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

onyx_linkagg – Manage link aggregation groups on Mellanox ONYX network devices¶

Synopsis¶

Parameters¶

Examples¶

Return Values¶

Status¶