onyx_mlag_ipl – Manage IPL (inter-peer link) on Mellanox ONYX network devices¶

New in version 2.5.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

This module provides declarative management of IPL (inter-peer link) management on Mellanox ONYX network devices.

Parameters ¶

Parameter	Choices/Defaults	Comments
name - / required		Name of the interface (port-channel) IPL should be configured on.
peer_address -		IPL peer IP address.
state -	Choices: present ← absent	IPL state.
vlan_interface -		Name of the IPL vlan interface.

Notes ¶

Note

Tested on ONYX 3.6.4000

Examples ¶

- name: run configure ipl
  onyx_mlag_ipl:
    name: Po1
    vlan_interface: Vlan 322
    state: present
    peer_address: 192.168.7.1

- name: run remove ipl
  onyx_mlag_ipl:
    name: Po1
    state: absent

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always	The list of configuration mode commands to send to the device. Sample: ['interface port-channel 1 ipl 1', 'interface vlan 1024 ipl 1 peer-address 10.10.10.10']

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors¶

Samer Deeb (@samerd)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

onyx_mlag_ipl – Manage IPL (inter-peer link) on Mellanox ONYX network devices¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶