route53 – add or delete entries in Amazons Route53 DNS service¶

New in version 1.3.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Creates and deletes DNS records in Amazons Route53 service

Requirements ¶

The below requirements are needed on the host that executes this module.

python >= 2.6
boto

Parameters ¶

Parameter	Choices/Defaults	Comments
alias boolean added in 1.9	Choices: no ← yes	Indicates if this is an alias record.
alias_evaluate_target_health boolean added in 2.1	Choices: no ← yes	Whether or not to evaluate an alias target health. Useful for aliases to Elastic Load Balancers.
alias_hosted_zone_id - added in 1.9		The hosted zone identifier.
aws_access_key -		AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used. aliases: ec2_access_key, access_key
aws_secret_key -		AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used. aliases: ec2_secret_key, secret_key
ec2_url -		Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used.
failover - added in 2.0		Failover resource record sets only. Whether this is the primary or secondary resource record set. Allowed values are PRIMARY and SECONDARY
health_check - added in 2.0		Health check to associate with this record
hosted_zone_id - added in 2.0		The Hosted Zone ID of the DNS zone to modify
identifier - added in 2.0		Have to be specified for Weighted, latency-based and failover resource record sets only. An identifier that differentiates among multiple resource record sets that have the same combination of DNS name and type.
overwrite -		Whether an existing record should be overwritten on create if values do not match
private_zone boolean added in 1.9	Choices: no ← yes	If set to `yes`, the private zone matching the requested name within the domain will be used if there are both public and private zones. The default is to use the public zone.
profile - added in 1.6		Uses a boto profile. Only works with boto >= 2.24.0.
record - / required		The full DNS record to create or delete
region - added in 2.0		Latency-based resource record sets only Among resource record sets that have the same combination of DNS name and type, a value that determines which region this should be associated with for the latency-based routing
retry_interval -	Default: 500	In the case that route53 is still servicing a prior request, this module will wait and try again after this many seconds. If you have many domain names, the default of 500 seconds may be too long.
security_token - added in 1.6		AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used. aliases: access_token
state - / required	Choices: present absent get create delete	Specifies the state of the resource record. As of Ansible 2.4, the command option has been changed to state as default and the choices 'present' and 'absent' have been added, but command still works as well. aliases: command
ttl -	Default: "3600 (one hour)"	The TTL to give the new record
type - / required	Choices: A CNAME MX AAAA TXT PTR SRV SPF CAA NS SOA	The type of DNS record to create
validate_certs boolean added in 1.5	Choices: no yes ←	When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0.
value -		The new value when creating a DNS record. YAML lists or multiple comma-spaced values are allowed for non-alias records. When deleting a record all values for the record must be specified or Route53 will not delete it.
vpc_id - added in 2.0		When used in conjunction with private_zone: true, this will only modify records in the private hosted zone attached to this VPC. This allows you to have multiple private hosted zones, all with the same name, attached to different VPCs.
wait boolean added in 2.1	Choices: no ← yes	Wait until the changes have been replicated to all Amazon Route 53 DNS servers.
wait_timeout - added in 2.1	Default: 300	How long to wait for the changes to be replicated, in seconds.
weight - added in 2.0		Weighted resource record sets only. Among resource record sets that have the same combination of DNS name and type, a value that determines what portion of traffic for the current resource record set is routed to the associated location.
zone - / required		The DNS zone to modify

Notes ¶

Note

If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION
Ansible uses the boto configuration file (typically ~/.boto) if no credentials are provided. See https://boto.readthedocs.io/en/latest/boto_config_tut.html
AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file

Examples ¶

# Add new.foo.com as an A record with 3 IPs and wait until the changes have been replicated
- route53:
      state: present
      zone: foo.com
      record: new.foo.com
      type: A
      ttl: 7200
      value: 1.1.1.1,2.2.2.2,3.3.3.3
      wait: yes

# Update new.foo.com as an A record with a list of 3 IPs and wait until the changes have been replicated
- route53:
      state: present
      zone: foo.com
      record: new.foo.com
      type: A
      ttl: 7200
      value:
        - 1.1.1.1
        - 2.2.2.2
        - 3.3.3.3
      wait: yes

# Retrieve the details for new.foo.com
- route53:
      state: get
      zone: foo.com
      record: new.foo.com
      type: A
  register: rec

# Delete new.foo.com A record using the results from the get command
- route53:
      state: absent
      zone: foo.com
      record: "{{ rec.set.record }}"
      ttl: "{{ rec.set.ttl }}"
      type: "{{ rec.set.type }}"
      value: "{{ rec.set.value }}"

# Add an AAAA record.  Note that because there are colons in the value
# that the IPv6 address must be quoted. Also shows using the old form command=create.
- route53:
      command: create
      zone: foo.com
      record: localhost.foo.com
      type: AAAA
      ttl: 7200
      value: "::1"

# Add a SRV record with multiple fields for a service on port 22222
# For more information on SRV records see:
# https://en.wikipedia.org/wiki/SRV_record
- route53:
      state: present
      zone: foo.com
      record: "_example-service._tcp.foo.com"
      type: SRV
      value: "0 0 22222 host1.foo.com,0 0 22222 host2.foo.com"

# Add a TXT record. Note that TXT and SPF records must be surrounded
# by quotes when sent to Route 53:
- route53:
      state: present
      zone: foo.com
      record: localhost.foo.com
      type: TXT
      ttl: 7200
      value: '"bar"'

# Add an alias record that points to an Amazon ELB:
- route53:
      state: present
      zone: foo.com
      record: elb.foo.com
      type: A
      value: "{{ elb_dns_name }}"
      alias: True
      alias_hosted_zone_id: "{{ elb_zone_id }}"

# Retrieve the details for elb.foo.com
- route53:
      state: get
      zone: foo.com
      record: elb.foo.com
      type: A
  register: rec

# Delete an alias record using the results from the get command
- route53:
      state: absent
      zone: foo.com
      record: "{{ rec.set.record }}"
      ttl: "{{ rec.set.ttl }}"
      type: "{{ rec.set.type }}"
      value: "{{ rec.set.value }}"
      alias: True
      alias_hosted_zone_id: "{{ rec.set.alias_hosted_zone_id }}"

# Add an alias record that points to an Amazon ELB and evaluates it health:
- route53:
    state: present
    zone: foo.com
    record: elb.foo.com
    type: A
    value: "{{ elb_dns_name }}"
    alias: True
    alias_hosted_zone_id: "{{ elb_zone_id }}"
    alias_evaluate_target_health: True

# Add an AAAA record with Hosted Zone ID.
- route53:
      state: present
      zone: foo.com
      hosted_zone_id: Z2AABBCCDDEEFF
      record: localhost.foo.com
      type: AAAA
      ttl: 7200
      value: "::1"

# Use a routing policy to distribute traffic:
- route53:
      state: present
      zone: foo.com
      record: www.foo.com
      type: CNAME
      value: host1.foo.com
      ttl: 30
      # Routing policy
      identifier: "host1@www"
      weight: 100
      health_check: "d994b780-3150-49fd-9205-356abdd42e75"

# Add a CAA record (RFC 6844):
- route53:
      state: present
      zone: example.com
      record: example.com
      type: CAA
      value:
        - 0 issue "ca.example.net"
        - 0 issuewild ";"
        - 0 iodef "mailto:[email protected]"

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key		Returned	Description
nameservers list		when state is 'get'	nameservers associated with the zone Sample: ['ns-1036.awsdns-00.org.', 'ns-516.awsdns-00.net.', 'ns-1504.awsdns-00.co.uk.', 'ns-1.awsdns-00.com.']
set complex		when state is 'get'	info specific to the resource record
	alias boolean	always	whether this is an alias
	failover NoneType	always
	health_check NoneType	always	health_check associated with this record
	identifier NoneType	always
	record string	always	domain name for the record set Sample: new.foo.com.
	region None	always
	ttl string	always	resource record cache TTL Sample: 3600
	type string	always	record set type Sample: A
	value string	always	value Sample: 52.43.18.27
	values list	always	values Sample: ['52.43.18.27']
	weight string	always	weight of the record Sample: 3
	zone string	always	zone this record set belongs to Sample: foo.bar.com.

Status ¶

This module is guaranteed to have no backward incompatible interface changes going forward. [stableinterface]
This module is maintained by the Ansible Community. [community]

Authors¶

Bruce Pennypacker (@bpennypacker)
Mike Buzzetti <mike.buzzetti@gmail.com>

Hint

If you notice any issues in this documentation you can edit this document to improve it.

route53 – add or delete entries in Amazons Route53 DNS service¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶