bigip_device_ha_group – Manage HA group settings on a BIG-IP system¶

New in version 2.8.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Manage HA group settings on a BIG-IP system.

Parameters ¶

Parameter		Choices/Defaults	Comments
active_bonus integer			Specifies the extra value to be added to the active unit's ha score. When system creates HA group this value is set to `10` by the system.
description string			User created HA group description.
enable boolean		Choices: no yes ←	When set to `no` the system disables the ha score feature.
name string / required			Name of the HA group to create/manage.
password string / required			The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
pools list			Specifies pools to contribute to the ha score. The pools must exist on the BIG-IP otherwise the operation will fail.
	attribute string	Choices: percent-up-members ←	The pool attribute that contributes to the ha score.
	minimum_threshold integer		Below this value the selected pool attribute contributes nothing to the ha score. This value must be greater than the number of pool members present in the pool. In TMOS versions 12.x this attribute is named `threshold` however it has been deprecated in versions 13.x and above. Specifying this attribute in the module running against v12.x will keep the same behavior as if `threshold` option was set.
	partition string	Default: "Common"	Device partition where the specified pool exists. This parameter is ignored if the `pool_name` is specified in full path format.
	pool_name string / required		The pool name which is used to contribute to the ha score. Referencing pool can be done in the full path format for example, `/Common/pool_name`. When pool is referenced in full path format, the `partition` parameter is ignored.
	weight integer / required		Maximum value the selected pool attribute contributes to the ha score.
provider dictionary added in 2.5			A dict object containing connection details.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	ssh_keyfile path		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable `ANSIBLE_NET_SSH_KEYFILE`.
	timeout integer	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: cli rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
server string / required			The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port integer added in 2.2		Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
state string		Choices: present ← absent	When `present`, ensures that the resource exists. When `absent`, ensures the resource is removed.
trunks list			Specifies trunks to contribute to the ha score. The trunks must exist on the BIG-IP otherwise the operation will fail.
	attribute string	Choices: percent-up-members ←	The trunk attribute that contributes to the ha score.
	minimum_threshold integer		Below this value the selected trunk attribute contributes nothing to the ha score. This value must be greater than the number of trunk members. In TMOS versions 12.x this attribute is named `threshold` however it has been deprecated in versions 13.x and above. Specifying this attribute in the module running against v12.x will keep the same behavior as if `threshold` option was set.
	trunk_name string / required		The trunk name which is used to contribute to the ha score.
	weight integer / required		Maximum value the selected trunk attribute contributes to the ha score.
user string / required			The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean added in 2.0		Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.

Notes ¶

Note

This module does not support atomic removal of HA group objects.
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples ¶

- name: Create HA group no members, not active
  bigip_device_ha_group:
    name: foo_ha
    description: empty_foo
    active_bonus: 20
    enable: no
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Create HA group with pools and trunks
  bigip_device_ha_group:
    name: baz_ha
    description: non_empty_baz
    active_bonus: 15
    pools:
      - pool_name: foopool
        weight: 30
        minimum_threshold: 1
    trunks:
      - trunk_name: footrunk
        weight: 70
        minimum_threshold: 2
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Create HA group pools using full_path format
  bigip_device_ha_group:
    name: bar_ha
    description: non_empty_bar
    active_bonus: 12
    pools:
      - pool_name: /Baz/foopool
        weight: 30
        minimum_threshold: 1
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Remove HA group
  bigip_device_ha_group:
    name: foo_ha
    state: absent
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key		Returned	Description
active_bonus integer		changed	The extra value to be added to the active unit's ha score. Sample: 20
description string		changed	User created HA group description. Sample: Some Group
enable boolean		changed	Enables or disables HA score feature. Sample: True
name string		changed	Name of the HA group. Sample: foo_HA
pools complex		changed	The pools to contribute to the ha score. Sample: hash/dictionary of values
	attribute string	changed	The pool attribute that contributes to the ha score. Sample: percent-up-members
	minimum_threshold integer	changed	Below this value the selected pool attribute contributes nothing to the ha score. Sample: 2
	partition string	changed	Device partition where the specified pool exists. Sample: Common
	pool_name string	changed	The pool name which is used to contribute to the ha score. Sample: foo_pool
	weight integer	changed	Maximum value the selected pool attribute contributes to the ha score. Sample: 40
trunks complex		changed	The trunks to contribute to the ha score. Sample: hash/dictionary of values
	attribute string	changed	The trunk attribute that contributes to the ha score. Sample: percent-up-members
	minimum_threshold integer	changed	Below this value the selected trunk attribute contributes nothing to the ha score. Sample: 2
	trunk_name string	changed	The trunk name which is used to contribute to the ha score. Sample: foo_trunk
	weight integer	changed	Maximum value the selected trunk attribute contributes to the ha score. Sample: 40

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by an Ansible Partner. [certified]

Authors¶

Wojciech Wypior (@wojtek0806)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

bigip_device_ha_group – Manage HA group settings on a BIG-IP system¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶