bigip_monitor_snmp_dca – Manages BIG-IP SNMP data collecting agent (DCA) monitors¶

New in version 2.5.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

The BIG-IP has an SNMP data collecting agent (DCA) that can query remote SNMP agents of various types, including the UC Davis agent (UCD) and the Windows 2000 Server agent (WIN2000).

Parameters ¶

Parameter		Choices/Defaults	Comments
agent_type string		Choices: UCD WIN2000 GENERIC	Specifies the SNMP agent running on the monitored server. When creating a new monitor, the default is `UCD` (UC-Davis).
community string			Specifies the community name that the system must use to authenticate with the host server through SNMP. When creating a new monitor, the default value is `public`. Note that this value is case sensitive.
cpu_coefficient string			Specifies the coefficient that the system uses to calculate the weight of the CPU threshold in the dynamic ratio load balancing algorithm. When creating a new monitor, the default is `1.5`.
cpu_threshold integer			Specifies the maximum acceptable CPU usage on the target server. When creating a new monitor, the default is `80` percent.
description string			Specifies descriptive text that identifies the monitor.
disk_coefficient string			Specifies the coefficient that the system uses to calculate the weight of the disk threshold in the dynamic ratio load balancing algorithm. When creating a new monitor, the default is `2.0`.
disk_threshold integer			Specifies the maximum acceptable disk usage on the target server. When creating a new monitor, the default is `90` percent.
interval integer			Specifies, in seconds, the frequency at which the system issues the monitor check when either the resource is down or the status of the resource is unknown. When creating a new monitor, the default is `10`.
memory_coefficient string			Specifies the coefficient that the system uses to calculate the weight of the memory threshold in the dynamic ratio load balancing algorithm. When creating a new monitor, the default is `1.0`.
memory_threshold integer			Specifies the maximum acceptable memory usage on the target server. When creating a new monitor, the default is `70` percent.
name string / required			Monitor name.
parent string		Default: "/Common/snmp_dca"	The parent template of this monitor template. Once this value has been set, it cannot be changed. By default, this value is the `snmp_dca` parent on the `Common` partition.
partition string		Default: "Common"	Device partition to manage resources on.
password string / required			The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
provider dictionary added in 2.5			A dict object containing connection details.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	ssh_keyfile path		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable `ANSIBLE_NET_SSH_KEYFILE`.
	timeout integer	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: cli rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
server string / required			The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port integer added in 2.2		Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
state string added in 2.5		Choices: present ← absent	When `present`, ensures that the monitor exists. When `absent`, ensures the monitor is removed.
time_until_up integer			Specifies the number of seconds to wait after a resource first responds correctly to the monitor before setting the resource to 'up'. During the interval, all responses from the resource must be correct. When the interval expires, the resource is marked 'up'. A value of 0, means that the resource is marked up immediately upon receipt of the first correct response. When creating a new monitor, the default is `0`.
timeout integer			Specifies the number of seconds the target has in which to respond to the monitor request. When creating a new monitor, the default is `30` seconds. If the target responds within the set time period, it is considered 'up'. If the target does not respond within the set time period, it is considered 'down'. When this value is set to 0 (zero), the system uses the interval from the parent monitor. Note that `timeout` and `time_until_up` combine to control when a resource is set to up.
user string / required			The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean added in 2.0		Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
version string		Choices: v1 v2c	Specifies the version of SNMP that the host server uses. When creating a new monitor, the default is `v1`. When `v1`, specifies that the host server uses SNMP version 1. When `v2c`, specifies that the host server uses SNMP version 2c.

Notes ¶

Note

Requires BIG-IP software version >= 12
This module does not support the variables option because this option is broken in the REST API and does not function correctly in tmsh; for example you cannot remove user-defined params. Therefore, there is no way to automatically configure it.
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples ¶

- name: Create SNMP DCS monitor
  bigip_monitor_snmp_dca:
    name: my_monitor
    state: present
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Remove TCP Echo Monitor
  bigip_monitor_snmp_dca:
    name: my_monitor
    state: absent
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
agent_type string	changed	The new agent type to be used by the monitor. Sample: UCD
community string	changed	The new community for the monitor. Sample: foobar
cpu_coefficient float	changed	The new CPU coefficient. Sample: 2.4
cpu_threshold integer	changed	The new CPU threshold. Sample: 85
description string	changed	The description of the monitor. Sample: Important Monitor
disk_coefficient float	changed	The new disk coefficient. Sample: 10.2
disk_threshold integer	changed	The new disk threshold. Sample: 34
interval integer	changed	The new interval in which to run the monitor check. Sample: 2
memory_coefficient float	changed	The new memory coefficient. Sample: 6.4
memory_threshold integer	changed	The new memory threshold. Sample: 50
parent string	changed	New parent template of the monitor. Sample: snmp_dca
time_until_up integer	changed	The new time in which to mark a system as up after first successful response. Sample: 2
timeout integer	changed	The new timeout in which the remote system must respond to the monitor. Sample: 10
version string	changed	The new new SNMP version to be used by the monitor. Sample: v2c

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by an Ansible Partner. [certified]

Authors¶

Tim Rupp (@caphrim007)
Wojciech Wypior (@wojtek0806)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

bigip_monitor_snmp_dca – Manages BIG-IP SNMP data collecting agent (DCA) monitors¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶