dnf – Manages packages with the dnf package manager¶

Synopsis
Requirements
Parameters
Notes
Examples
Status

Synopsis ¶

Installs, upgrade, removes, and lists packages and groups with the dnf package manager.

Requirements ¶

The below requirements are needed on the host that executes this module.

python >= 2.6
python-dnf
for the autoremove option you need dnf >= 2.0.1”

Parameters ¶

Parameter	Choices/Defaults	Comments
allow_downgrade boolean added in 2.7	Choices: no ← yes	Specify if the named package and version is allowed to downgrade a maybe already installed higher version of that package. Note that setting allow_downgrade=True can make this module behave in a non-idempotent way. The task could end up with a set of packages that does not match the complete list of specified packages to install (because dependencies between the downgraded package and others can cause changes to the packages which were in the earlier transaction).
autoremove boolean added in 2.4	Choices: no ← yes	If `yes`, removes all "leaf" packages from the system that were originally installed as dependencies of user-installed packages but which are no longer required by any such package. Should be used alone or when state is absent
bugfix boolean added in 2.7	Choices: no ← yes	If set to `yes`, and `state=latest` then only installs updates that have been marked bugfix related.
conf_file -		The remote dnf configuration file to use for the transaction.
disable_excludes - added in 2.7		Disable the excludes defined in DNF config files. If set to `all`, disables all excludes. If set to `main`, disable excludes defined in [main] in dnf.conf. If set to `repoid`, disable excludes defined for given repo id.
disable_gpg_check boolean	Choices: no ← yes	Whether to disable the GPG checking of signatures of packages being installed. Has an effect only if state is present or latest. This setting affects packages installed from a repository as well as "local" packages installed from the filesystem or a URL.
disable_plugin - added in 2.7		Plugin name to disable for the install/update operation. The disabled plugins will not persist beyond the transaction.
disablerepo -		Repoid of repositories to disable for the install/update operation. These repos will not persist beyond the transaction. When specifying multiple repos, separate them with a ",".
download_dir string added in 2.8		Specifies an alternate directory to store packages. Has an effect only if download_only is specified.
download_only boolean added in 2.7	Choices: no ← yes	Only download the packages, do not install them.
enable_plugin - added in 2.7		Plugin name to enable for the install/update operation. The enabled plugin will not persist beyond the transaction.
enablerepo -		Repoid of repositories to enable for the install/update operation. These repos will not persist beyond the transaction. When specifying multiple repos, separate them with a ",".
exclude - added in 2.7		Package name(s) to exclude when state=present, or latest. This can be a list or a comma separated string.
install_repoquery boolean added in 2.7	Choices: no yes ←	This is effectively a no-op in DNF as it is not needed with DNF, but is an accepted parameter for feature parity/compatibility with the yum module.
install_weak_deps boolean added in 2.8	Choices: no yes ←	Will also install all packages linked by a weak dependency relation.
installroot - added in 2.3	Default: "/"	Specifies an alternative installroot, relative to which all packages will be installed.
list -		Various (non-idempotent) commands for usage with `/usr/bin/ansible` and not playbooks. See examples.
lock_timeout integer added in 2.8	Default: 30	Amount of time to wait for the dnf lockfile to be freed.
name - / required		A package name or package specifier with version, like `name-1.0`. When using state=latest, this can be '*' which means run: dnf -y update. You can also pass a url or a local path to a rpm file. To operate on several packages this can accept a comma separated string of packages or a list of packages. aliases: pkg
releasever - added in 2.6		Specifies an alternative release from which all packages will be installed.
security boolean added in 2.7	Choices: no ← yes	If set to `yes`, and `state=latest` then only installs updates that have been marked security related.
skip_broken boolean added in 2.7	Choices: no ← yes	Skip packages with broken dependencies(devsolve) and are causing problems.
state -	Choices: absent present installed removed latest	Whether to install (`present`, `latest`), or remove (`absent`) a package. Default is `None`, however in effect the default action is `present` unless the `autoremove` option is enabled for this module, then `absent` is inferred.
update_cache boolean added in 2.7	Choices: no ← yes	Force dnf to check if cache is out of date and redownload if needed. Has an effect only if state is present or latest. aliases: expire-cache
update_only boolean added in 2.7	Choices: no ← yes	When using latest, only update installed packages. Do not install packages. Has an effect only if state is latest
validate_certs boolean added in 2.7	Choices: no yes ←	This only applies if using a https url as the source of the rpm. e.g. for localinstall. If set to `no`, the SSL certificates will not be validated. This should only set to `no` used on personally controlled sites using self-signed certificates as it avoids verifying the source site.

Notes ¶

Note

When used with a loop: each package will be processed individually, it is much more efficient to pass the list directly to the name option.
Group removal doesn’t work if the group was installed with Ansible because upstream dnf’s API doesn’t properly mark groups as installed, therefore upon removal the module is unable to detect that the group is installed (https://bugzilla.redhat.com/show_bug.cgi?id=1620324)

Examples ¶

- name: install the latest version of Apache
  dnf:
    name: httpd
    state: latest

- name: install the latest version of Apache and MariaDB
  dnf:
    name:
      - httpd
      - mariadb-server
    state: latest

- name: remove the Apache package
  dnf:
    name: httpd
    state: absent

- name: install the latest version of Apache from the testing repo
  dnf:
    name: httpd
    enablerepo: testing
    state: present

- name: upgrade all packages
  dnf:
    name: "*"
    state: latest

- name: install the nginx rpm from a remote repo
  dnf:
    name: 'http://nginx.org/packages/centos/6/noarch/RPMS/nginx-release-centos-6-0.el6.ngx.noarch.rpm'
    state: present

- name: install nginx rpm from a local file
  dnf:
    name: /usr/local/src/nginx-release-centos-6-0.el6.ngx.noarch.rpm
    state: present

- name: install the 'Development tools' package group
  dnf:
    name: '@Development tools'
    state: present

- name: Autoremove unneeded packages installed as dependencies
  dnf:
    autoremove: yes

- name: Uninstall httpd but keep its dependencies
  dnf:
    name: httpd
    state: absent
    autoremove: no

- name: install a modularity appstream with defined stream and profile
  dnf:
    name: '@postgresql:9.6/client'
    state: present

- name: install a modularity appstream with defined stream
  dnf:
    name: '@postgresql:9.6'
    state: present

- name: install a modularity appstream with defined profile
  dnf:
    name: '@postgresql/client'
    state: present

Status ¶

This module is guaranteed to have no backward incompatible interface changes going forward. [stableinterface]
This module is maintained by the Ansible Core Team. [core]

Red Hat Support¶

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors¶

Igor Gnatenko (@ignatenkobrain) <i.gnatenko.brain@gmail.com>
Cristian van Ee (@DJMuggs) <cristian at cvee.org>
Berend De Schouwer (@berenddeschouwer)
Adam Miller (@maxamillion) <admiller@redhat.com>

Hint

If you notice any issues in this documentation you can edit this document to improve it.

dnf – Manages packages with the dnf package manager¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Status¶