elb_target_group – Manage a target group for an Application or Network load balancer¶

New in version 2.4.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Manage an AWS Elastic Load Balancer target group. See https://docs.aws.amazon.com/elasticloadbalancing/latest/application/load-balancer-target-groups.html or https://docs.aws.amazon.com/elasticloadbalancing/latest/network/load-balancer-target-groups.html for details.

Requirements ¶

The below requirements are needed on the host that executes this module.

boto
boto3
python >= 2.6

Parameters ¶

Parameter	Choices/Defaults	Comments
aws_access_key string		AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used. aliases: ec2_access_key, access_key
aws_secret_key string		AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used. aliases: ec2_secret_key, secret_key
debug_botocore_endpoint_logs boolean added in 2.8	Choices: no ← yes	Use a botocore.endpoint logger to parse the unique (rather than total) "resource:action" API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used.
deregistration_delay_timeout -		The amount time for Elastic Load Balancing to wait before changing the state of a deregistering target from draining to unused. The range is 0-3600 seconds.
ec2_url string		Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used.
health_check_interval -		The approximate amount of time, in seconds, between health checks of an individual target.
health_check_path -		The ping path that is the destination on the targets for health checks. The path must be defined in order to set a health check.
health_check_port -	Default: "The port on which each target receives traffic from the load balancer."	The port the load balancer uses when performing health checks on targets. Can be set to 'traffic-port' to match target port.
health_check_protocol -	Choices: http https tcp	The protocol the load balancer uses when performing health checks on targets.
health_check_timeout -		The amount of time, in seconds, during which no response from a target means a failed health check.
healthy_threshold_count -		The number of consecutive health checks successes required before considering an unhealthy target healthy.
modify_targets boolean	Choices: no yes ←	Whether or not to alter existing targets in the group to match what is passed with the module
name - / required		The name of the target group.
port -		The port on which the targets receive traffic. This port is used unless you specify a port override when registering the target. Required if state is `present`.
profile string		Uses a boto profile. Only works with boto >= 2.24.0.
protocol -	Choices: http https tcp	The protocol to use for routing traffic to the targets. Required when state is `present`.
purge_tags boolean	Choices: no yes ←	If yes, existing tags will be purged from the resource to match exactly what is defined by tags parameter. If the tag parameter is not set then tags will not be modified.
region string		The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region aliases: aws_region, ec2_region
security_token string		AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used. aliases: access_token
state - / required	Choices: present absent	Create or destroy the target group.
stickiness_enabled boolean	Choices: no yes	Indicates whether sticky sessions are enabled.
stickiness_lb_cookie_duration -		The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the load balancer-generated cookie is considered stale. The range is 1 second to 1 week (604800 seconds).
stickiness_type -	Default: "lb_cookie"	The type of sticky sessions. The possible value is lb_cookie.
successful_response_codes -		The HTTP codes to use when checking for a successful response from a target. Accepts multiple values (for example, "200,202") or a range of values (for example, "200-299"). Requires the health_check_protocol parameter to be set.
tags -		A dictionary of one or more tags to assign to the target group.
target_type - added in 2.5	Choices: instance ← ip	The type of target that you must specify when registering targets with this target group. The possible values are `instance` (targets are specified by instance ID) or `ip` (targets are specified by IP address). Note that you can't specify targets for a target group using both instance IDs and IP addresses. If the target type is ip, specify IP addresses from the subnets of the virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.
targets -		A list of targets to assign to the target group. This parameter defaults to an empty list. Unless you set the 'modify_targets' parameter then all existing targets will be removed from the group. The list should be an Id and a Port parameter. See the Examples for detail.
unhealthy_threshold_count -		The number of consecutive health check failures required before considering a target unhealthy.
validate_certs boolean	Choices: no yes ←	When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0.
vpc_id -		The identifier of the virtual private cloud (VPC). Required when state is `present`.
wait boolean added in 2.4	Choices: no ← yes	Whether or not to wait for the target group.
wait_timeout - added in 2.4	Default: 200	The time to wait for the target group.

Notes ¶

Note

Once a target group has been created, only its health check can then be modified using subsequent calls
If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION
Ansible uses the boto configuration file (typically ~/.boto) if no credentials are provided. See https://boto.readthedocs.io/en/latest/boto_config_tut.html
AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file

Examples ¶

# Note: These examples do not set authentication details, see the AWS Guide for details.

# Create a target group with a default health check
- elb_target_group:
    name: mytargetgroup
    protocol: http
    port: 80
    vpc_id: vpc-01234567
    state: present

# Modify the target group with a custom health check
- elb_target_group:
    name: mytargetgroup
    protocol: http
    port: 80
    vpc_id: vpc-01234567
    health_check_path: /
    successful_response_codes: "200,250-260"
    state: present

# Delete a target group
- elb_target_group:
    name: mytargetgroup
    state: absent

# Create a target group with instance targets
- elb_target_group:
    name: mytargetgroup
    protocol: http
    port: 81
    vpc_id: vpc-01234567
    health_check_path: /
    successful_response_codes: "200,250-260"
    targets:
      - Id: i-01234567
        Port: 80
      - Id: i-98765432
        Port: 80
    state: present
    wait_timeout: 200
    wait: True

# Create a target group with IP address targets
- elb_target_group:
    name: mytargetgroup
    protocol: http
    port: 81
    vpc_id: vpc-01234567
    health_check_path: /
    successful_response_codes: "200,250-260"
    target_type: ip
    targets:
      - Id: 10.0.0.10
        Port: 80
        AvailabilityZone: all
      - Id: 10.0.0.20
        Port: 80
    state: present
    wait_timeout: 200
    wait: True

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
deregistration_delay_timeout_seconds integer	when state present	The amount time for Elastic Load Balancing to wait before changing the state of a deregistering target from draining to unused. Sample: 300
health_check_interval_seconds integer	when state present	The approximate amount of time, in seconds, between health checks of an individual target. Sample: 30
health_check_path string	when state present	The destination for the health check request. Sample: /index.html
health_check_port string	when state present	The port to use to connect with the target. Sample: traffic-port
health_check_protocol string	when state present	The protocol to use to connect with the target. Sample: HTTP
health_check_timeout_seconds integer	when state present	The amount of time, in seconds, during which no response means a failed health check. Sample: 5
healthy_threshold_count integer	when state present	The number of consecutive health checks successes required before considering an unhealthy target healthy. Sample: 5
load_balancer_arns list	when state present	The Amazon Resource Names (ARN) of the load balancers that route traffic to this target group.
matcher dictionary	when state present	The HTTP codes to use when checking for a successful response from a target. Sample: {'http_code': '200'}
port integer	when state present	The port on which the targets are listening. Sample: 80
protocol string	when state present	The protocol to use for routing traffic to the targets. Sample: HTTP
stickiness_enabled boolean	when state present	Indicates whether sticky sessions are enabled. Sample: True
stickiness_lb_cookie_duration_seconds integer	when state present	The time period, in seconds, during which requests from a client should be routed to the same target. Sample: 86400
stickiness_type string	when state present	The type of sticky sessions. Sample: lb_cookie
tags dictionary	when state present	The tags attached to the target group. Sample: { 'Tag': 'Example' }
target_group_arn string	when state present	The Amazon Resource Name (ARN) of the target group. Sample: arn:aws:elasticloadbalancing:ap-southeast-2:01234567890:targetgroup/mytargetgroup/aabbccddee0044332211
target_group_name string	when state present	The name of the target group. Sample: mytargetgroup
unhealthy_threshold_count integer	when state present	The number of consecutive health check failures required before considering the target unhealthy. Sample: 2
vpc_id string	when state present	The ID of the VPC for the targets. Sample: vpc-0123456

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors¶

Rob White (@wimnat)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

elb_target_group – Manage a target group for an Application or Network load balancer¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶