fortios_extender_controller_extender – Extender controller configuration in Fortinet’s FortiOS and FortiGate¶
New in version 2.8.
Synopsis¶
This module is able to configure a FortiGate or FortiOS by allowing the user to configure extender_controller feature and extender category. Examples includes all options and need to be adjusted to datasources before usage. Tested with FOS v6.0.2
Requirements¶
The below requirements are needed on the host that executes this module.
fortiosapi>=0.9.8
Parameters¶
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
extender_controller_extender
-
|
Default: null
|
Extender controller configuration.
|
|
aaa-shared-secret
-
|
AAA shared secret.
|
||
access-point-name
-
|
Access point name(APN).
|
||
admin
-
|
|
FortiExtender Administration (enable or disable).
|
|
at-dial-script
-
|
Initialization AT commands specific to the MODEM.
|
||
billing-start-day
-
|
Billing start day.
|
||
cdma-aaa-spi
-
|
CDMA AAA SPI.
|
||
cdma-ha-spi
-
|
CDMA HA SPI.
|
||
cdma-nai
-
|
NAI for CDMA MODEMS.
|
||
conn-status
-
|
Connection status.
|
||
description
-
|
Description.
|
||
dial-mode
-
|
|
Dial mode (dial-on-demand or always-connect).
|
|
dial-status
-
|
Dial status.
|
||
ext-name
-
|
FortiExtender name.
|
||
ha-shared-secret
-
|
HA shared secret.
|
||
id
-
/ required
|
FortiExtender serial number.
|
||
ifname
-
|
FortiExtender interface name.
|
||
initiated-update
-
|
|
Allow/disallow network initiated updates to the MODEM.
|
|
mode
-
|
|
FortiExtender mode.
|
|
modem-passwd
-
|
MODEM password.
|
||
modem-type
-
|
|
MODEM type (CDMA, GSM/LTE or WIMAX).
|
|
multi-mode
-
|
|
MODEM mode of operation(3G,LTE,etc).
|
|
ppp-auth-protocol
-
|
|
PPP authentication protocol (PAP,CHAP or auto).
|
|
ppp-echo-request
-
|
|
Enable/disable PPP echo request.
|
|
ppp-password
-
|
PPP password.
|
||
ppp-username
-
|
PPP username.
|
||
primary-ha
-
|
Primary HA.
|
||
quota-limit-mb
-
|
Monthly quota limit (MB).
|
||
redial
-
|
|
Number of redials allowed based on failed attempts.
|
|
redundant-intf
-
|
Redundant interface.
|
||
roaming
-
|
|
Enable/disable MODEM roaming.
|
|
role
-
|
|
FortiExtender work role(Primary, Secondary, None).
|
|
secondary-ha
-
|
Secondary HA.
|
||
sim-pin
-
|
SIM PIN.
|
||
state
-
|
|
Indicates whether to create or remove the object
|
|
vdom
-
|
VDOM
|
||
wimax-auth-protocol
-
|
|
WiMax authentication protocol(TLS or TTLS).
|
|
wimax-carrier
-
|
WiMax carrier.
|
||
wimax-realm
-
|
WiMax realm.
|
||
host
-
/ required
|
FortiOS or FortiGate ip address.
|
||
https
boolean
|
|
Indicates if the requests towards FortiGate must use HTTPS protocol
|
|
password
-
|
Default: ""
|
FortiOS or FortiGate password.
|
|
username
-
/ required
|
FortiOS or FortiGate username.
|
||
vdom
-
|
Default: "root"
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
|
Notes¶
Note
Requires fortiosapi library developed by Fortinet
Run as a local_action in your playbook
Examples¶
- hosts: localhost
vars:
host: "192.168.122.40"
username: "admin"
password: ""
vdom: "root"
tasks:
- name: Extender controller configuration.
fortios_extender_controller_extender:
host: "{{ host }}"
username: "{{ username }}"
password: "{{ password }}"
vdom: "{{ vdom }}"
extender_controller_extender:
state: "present"
aaa-shared-secret: "<your_own_value>"
access-point-name: "<your_own_value>"
admin: "disable"
at-dial-script: "<your_own_value>"
billing-start-day: "7"
cdma-aaa-spi: "<your_own_value>"
cdma-ha-spi: "<your_own_value>"
cdma-nai: "<your_own_value>"
conn-status: "11"
description: "<your_own_value>"
dial-mode: "dial-on-demand"
dial-status: "14"
ext-name: "<your_own_value>"
ha-shared-secret: "<your_own_value>"
id: "17"
ifname: "<your_own_value>"
initiated-update: "enable"
mode: "standalone"
modem-passwd: "<your_own_value>"
modem-type: "cdma"
multi-mode: "auto"
ppp-auth-protocol: "auto"
ppp-echo-request: "enable"
ppp-password: "<your_own_value>"
ppp-username: "<your_own_value>"
primary-ha: "<your_own_value>"
quota-limit-mb: "29"
redial: "none"
redundant-intf: "<your_own_value>"
roaming: "enable"
role: "none"
secondary-ha: "<your_own_value>"
sim-pin: "<your_own_value>"
vdom: "36"
wimax-auth-protocol: "tls"
wimax-carrier: "<your_own_value>"
wimax-realm: "<your_own_value>"
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
build
string
|
always |
Build number of the fortigate image
Sample:
1547
|
http_method
string
|
always |
Last method used to provision the content into FortiGate
Sample:
PUT
|
http_status
string
|
always |
Last result given by FortiGate on last operation applied
Sample:
200
|
mkey
string
|
success |
Master key (id) used in the last call to FortiGate
Sample:
id
|
name
string
|
always |
Name of the table used to fulfill the request
Sample:
urlfilter
|
path
string
|
always |
Path of the table used to fulfill the request
Sample:
webfilter
|
revision
string
|
always |
Internal revision number
Sample:
17.0.2.10658
|
serial
string
|
always |
Serial number of the unit
Sample:
FGVMEVYYQT3AB5352
|
status
string
|
always |
Indication of the operation's result
Sample:
success
|
vdom
string
|
always |
Virtual domain used
Sample:
root
|
version
string
|
always |
Version of the FortiGate
Sample:
v5.6.3
|
Status¶
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]