fortios_vpn_ipsec_phase2_interface – Configure VPN autokey tunnel in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

  • This module is able to configure a FortiGate or FortiOS by allowing the user to set and modify vpn_ipsec feature and phase2_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.2

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments
host
- / required
FortiOS or FortiGate ip address.
https
boolean
    Choices:
  • no
  • yes ←
Indicates if the requests towards FortiGate must use HTTPS protocol
password
-
Default:
""
FortiOS or FortiGate password.
username
- / required
FortiOS or FortiGate username.
vdom
-
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
vpn_ipsec_phase2_interface
-
Default:
null
Configure VPN autokey tunnel.
add-route
-
    Choices:
  • phase1
  • enable
  • disable
Enable/disable automatic route addition.
auto-discovery-forwarder
-
    Choices:
  • phase1
  • enable
  • disable
Enable/disable forwarding short-cut messages.
auto-discovery-sender
-
    Choices:
  • phase1
  • enable
  • disable
Enable/disable sending short-cut messages.
auto-negotiate
-
    Choices:
  • enable
  • disable
Enable/disable IPsec SA auto-negotiation.
comments
-
Comment.
dhcp-ipsec
-
    Choices:
  • enable
  • disable
Enable/disable DHCP-IPsec.
dhgrp
-
    Choices:
  • 1
  • 2
  • 5
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 27
  • 28
  • 29
  • 30
  • 31
Phase2 DH group.
dst-addr-type
-
    Choices:
  • subnet
  • range
  • ip
  • name
  • subnet6
  • range6
  • ip6
  • name6
Remote proxy ID type.
dst-end-ip
-
Remote proxy ID IPv4 end.
dst-end-ip6
-
Remote proxy ID IPv6 end.
dst-name
-
Remote proxy ID name. Source firewall.address.name firewall.addrgrp.name.
dst-name6
-
Remote proxy ID name. Source firewall.address6.name firewall.addrgrp6.name.
dst-port
-
Quick mode destination port (1 - 65535 or 0 for all).
dst-start-ip
-
Remote proxy ID IPv4 start.
dst-start-ip6
-
Remote proxy ID IPv6 start.
dst-subnet
-
Remote proxy ID IPv4 subnet.
dst-subnet6
-
Remote proxy ID IPv6 subnet.
encapsulation
-
    Choices:
  • tunnel-mode
  • transport-mode
ESP encapsulation mode.
keepalive
-
    Choices:
  • enable
  • disable
Enable/disable keep alive.
keylife-type
-
    Choices:
  • seconds
  • kbs
  • both
Keylife type.
keylifekbs
-
Phase2 key life in number of bytes of traffic (5120 - 4294967295).
keylifeseconds
-
Phase2 key life in time in seconds (120 - 172800).
l2tp
-
    Choices:
  • enable
  • disable
Enable/disable L2TP over IPsec.
name
- / required
IPsec tunnel name.
pfs
-
    Choices:
  • enable
  • disable
Enable/disable PFS feature.
phase1name
-
Phase 1 determines the options required for phase 2. Source vpn.ipsec.phase1-interface.name.
proposal
-
    Choices:
  • null-md5
  • null-sha1
  • null-sha256
  • null-sha384
  • null-sha512
  • des-null
  • des-md5
  • des-sha1
  • des-sha256
  • des-sha384
  • des-sha512
Phase2 proposal.
protocol
-
Quick mode protocol selector (1 - 255 or 0 for all).
replay
-
    Choices:
  • enable
  • disable
Enable/disable replay detection.
route-overlap
-
    Choices:
  • use-old
  • use-new
  • allow
Action for overlapping routes.
single-source
-
    Choices:
  • enable
  • disable
Enable/disable single source IP restriction.
src-addr-type
-
    Choices:
  • subnet
  • range
  • ip
  • name
  • subnet6
  • range6
  • ip6
  • name6
Local proxy ID type.
src-end-ip
-
Local proxy ID end.
src-end-ip6
-
Local proxy ID IPv6 end.
src-name
-
Local proxy ID name. Source firewall.address.name firewall.addrgrp.name.
src-name6
-
Local proxy ID name. Source firewall.address6.name firewall.addrgrp6.name.
src-port
-
Quick mode source port (1 - 65535 or 0 for all).
src-start-ip
-
Local proxy ID start.
src-start-ip6
-
Local proxy ID IPv6 start.
src-subnet
-
Local proxy ID subnet.
src-subnet6
-
Local proxy ID IPv6 subnet.
state
-
    Choices:
  • present
  • absent
Indicates whether to create or remove the object

Notes

Note

  • Requires fortiosapi library developed by Fortinet

  • Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
  tasks:
  - name: Configure VPN autokey tunnel.
    fortios_vpn_ipsec_phase2_interface:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      vpn_ipsec_phase2_interface:
        state: "present"
        add-route: "phase1"
        auto-discovery-forwarder: "phase1"
        auto-discovery-sender: "phase1"
        auto-negotiate: "enable"
        comments: "<your_own_value>"
        dhcp-ipsec: "enable"
        dhgrp: "1"
        dst-addr-type: "subnet"
        dst-end-ip: "<your_own_value>"
        dst-end-ip6: "<your_own_value>"
        dst-name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        dst-name6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        dst-port: "15"
        dst-start-ip: "<your_own_value>"
        dst-start-ip6: "<your_own_value>"
        dst-subnet: "<your_own_value>"
        dst-subnet6: "<your_own_value>"
        encapsulation: "tunnel-mode"
        keepalive: "enable"
        keylife-type: "seconds"
        keylifekbs: "23"
        keylifeseconds: "24"
        l2tp: "enable"
        name: "default_name_26"
        pfs: "enable"
        phase1name: "<your_own_value> (source vpn.ipsec.phase1-interface.name)"
        proposal: "null-md5"
        protocol: "30"
        replay: "enable"
        route-overlap: "use-old"
        single-source: "enable"
        src-addr-type: "subnet"
        src-end-ip: "<your_own_value>"
        src-end-ip6: "<your_own_value>"
        src-name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        src-name6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        src-port: "39"
        src-start-ip: "<your_own_value>"
        src-start-ip6: "<your_own_value>"
        src-subnet: "<your_own_value>"
        src-subnet6: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation you can edit this document to improve it.