na_ontap_net_port – NetApp ONTAP network ports

New in version 2.6.

Synopsis

  • Modify a ONTAP network port.

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward

  • Ansible 2.6

  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’

  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’

  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
autonegotiate_admin
-
Enables or disables Ethernet auto-negotiation of speed, duplex and flow control.
duplex_admin
-
Specifies the user preferred duplex setting of the port.
Valid values auto, half, full
flowcontrol_admin
-
Specifies the user preferred flow control setting of the port.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https
ipspace
-
Specifies the port's associated IPspace name.
The 'Cluster' ipspace is reserved for cluster ports.
mtu
-
Specifies the maximum transmission unit (MTU) reported by the port.
node
- / required
Specifies the name of node.
ontapi
integer
The ontap api version to use
password
string / required
Password for the specified user.

aliases: pass
ports
- / required
Specifies the name of port(s).

aliases: port
speed_admin
-
Specifies the user preferred speed setting of the port.
state
-
    Choices:
  • present ←
Whether the specified net port should exist or not.
username
string / required
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: Modify Net Port
  na_ontap_net_port:
    state: present
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    node: "{{ node_name }}"
    ports: e0d,e0c
    autonegotiate_admin: true

Status

Authors

Hint

If you notice any issues in this documentation you can edit this document to improve it.