pn_vlag – CLI command to create/delete/modify vlag

New in version 2.2.

DEPRECATED

Removed in Ansible

version: 2.12

Why

Doesn’t support latest Pluribus Networks netvisor

Alternative

Latest modules will be pushed in Ansible future versions.

Synopsis

  • Execute vlag-create/vlag-delete/vlag-modify command.

  • A virtual link aggregation group (VLAG) allows links that are physically connected to two different Pluribus Networks devices to appear as a single trunk to a third device. The third device can be a switch, server, or any Ethernet device. A VLAG can provide Layer 2 multipathing, which allows you to create redundancy by increasing bandwidth, enabling multiple parallel paths between nodes and loadbalancing traffic where alternative paths exist.

Parameters

Parameter Choices/Defaults Comments
pn_clipassword
-
Provide login password if user is not root.
pn_cliswitch
-
Default:
"local"
Target switch(es) to run this command on.
pn_cliusername
-
Provide login username if user is not root.
pn_failover_action
-
    Choices:
  • move
  • ignore
Specify the failover action as move or ignore.
pn_lacp_fallback
-
    Choices:
  • bundle
  • individual
Specify the LACP fallback mode as bundles or individual.
pn_lacp_fallback_timeout
-
Specify the LACP fallback timeout in seconds. The range is between 30 and 60 seconds with a default value of 50 seconds.
pn_lacp_mode
-
    Choices:
  • off
  • passive
  • active
Specify the LACP mode.
pn_lacp_timeout
-
    Choices:
  • slow
  • fast
Specify the LACP timeout as slow(30 seconds) or fast(4 seconds).
pn_mode
-
    Choices:
  • active-active
  • active-standby
Specify the mode for the VLAG. Active-standby indicates one side is active and the other side is in standby mode. Active-active indicates that both sides of the vlag are up by default.
pn_name
- / required
The pn_name takes a valid name for vlag configuration.
pn_peer_port
-
Specify the peer VLAG port.
Required for vlag-create.
pn_peer_switch
-
Specify the fabric-name of the peer switch.
pn_port
-
Specify the local VLAG port.
Required for vlag-create.
state
- / required
    Choices:
  • present
  • absent
  • update
State the action to perform. Use 'present' to create vlag, 'absent' to delete vlag and 'update' to modify vlag.

Examples

- name: create a VLAG
  pn_vlag:
    state: 'present'
    pn_name: spine-to-leaf
    pn_port: 'spine01-to-leaf'
    pn_peer_port: 'spine02-to-leaf'
    pn_peer_switch: spine02
    pn_mode: 'active-active'

- name: delete VLAGs
  pn_vlag:
    state: 'absent'
    pn_name: spine-to-leaf

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
Indicates whether the CLI caused changes on the target.

command
string
always
The CLI command run on the target node(s).

stderr
list
on error
The set of error responses from the vlag command.

stdout
list
always
The set of responses from the vlag command.



Status

  • This module will be removed in version 2.12. [deprecated]

  • For more information see DEPRECATED.

Authors

  • Pluribus Networks (@amitsi)

Hint

If you notice any issues in this documentation you can edit this document to improve it.