aci_access_sub_port_block_to_access_port – Manage sub port blocks of Fabric interface policy leaf profile interface selectors (infra:HPortS, infra:SubPortBlk)

New in version 2.8.

Synopsis

  • Manage sub port blocks of Fabric interface policy leaf profile interface selectors on Cisco ACI fabrics.

Parameters

Parameter Choices/Defaults Comments
access_port_selector
string / required
The name of the Fabric access policy leaf interface profile access port selector.

aliases: name, access_port_selector_name
certificate_name
string
The X.509 certificate name attached to the APIC AAA user used for signature-based authentication.
If a private_key filename was provided, this defaults to the private_key basename, without extension.
If PEM-formatted content was provided for private_key, this defaults to the username value.

aliases: cert_name
from_card
string
The beginning (from-range) of the card range block for the leaf access port block.

aliases: from_card_range
from_port
string / required
The beginning (from-range) of the port range block for the leaf access port block.

aliases: from, fromPort, from_port_range
from_sub_port
string / required
The beginning (from-range) of the sub port range block for the leaf access port block.

aliases: fromSubPort, from_sub_port_range
host
string / required
IP Address or hostname of APIC resolvable by Ansible control host.

aliases: hostname
leaf_interface_profile
string / required
The name of the Fabric access policy leaf interface profile.

aliases: leaf_interface_profile_name
leaf_port_blk
string / required
The name of the Fabric access policy leaf interface profile access port block.

aliases: leaf_port_blk_name
leaf_port_blk_description
-
The description to assign to the leaf_port_blk.
output_level
string
    Choices:
  • debug
  • info
  • normal ←
Influence the output of this ACI module.
normal means the standard output, incl. current dict
info adds informational output, incl. previous, proposed and sent dicts
debug adds debugging output, incl. filter_string, method, response, status and url information
password
string / required
The password to use for authentication.
This option is mutual exclusive with private_key. If private_key is provided too, it will be used instead.
port
integer
Port number to be used for REST connection.
The default value depends on parameter use_ssl.
private_key
string / required
Either a PEM-formatted private key file or the private key content used for signature-based authentication.
This value also influences the default certificate_name that is used.
This option is mutual exclusive with password. If password is provided too, it will be ignored.

aliases: cert_key
state
string
    Choices:
  • absent
  • present ←
  • query
Use present or absent for adding or removing.
Use query for listing an object or multiple objects.
timeout
integer
Default:
30
The socket level timeout in seconds.
to_card
string
The end (to-range) of the card range block for the leaf access port block.

aliases: to_card_range
to_port
string / required
The end (to-range) of the port range block for the leaf access port block.

aliases: to, toPort, to_port_range
to_sub_port
string / required
The end (to-range) of the sub port range block for the leaf access port block.

aliases: toSubPort, to_sub_port_range
use_proxy
boolean
    Choices:
  • no
  • yes ←
If no, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
use_ssl
boolean
    Choices:
  • no
  • yes ←
If no, an HTTP connection will be used instead of the default HTTPS connection.
username
string
Default:
"admin"
The username to use for authentication.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates will not be validated.
This should only set to no when used on personally controlled sites using self-signed certificates.

See Also

See also

APIC Management Information Model reference

More information about the internal APIC classes infra:HPortS and infra:SubPortBlk.

Cisco ACI Guide

Detailed information on how to manage your ACI infrastructure using Ansible.

Developing Cisco ACI modules

Detailed guide on how to write your own Cisco ACI modules to contribute.

Examples

- name: Associate an access sub port block (single port) to an interface selector
  aci_access_sub_port_block_to_access_port:
    host: apic
    username: admin
    password: SomeSecretPassword
    leaf_interface_profile: leafintprfname
    access_port_selector: accessportselectorname
    leaf_port_blk: leafportblkname
    from_port: 13
    to_port: 13
    from_sub_port: 1
    to_sub_port: 1
    state: present
  delegate_to: localhost

- name: Associate an access sub port block (port range) to an interface selector
  aci_access_sub_port_block_to_access_port:
    host: apic
    username: admin
    password: SomeSecretPassword
    leaf_interface_profile: leafintprfname
    access_port_selector: accessportselectorname
    leaf_port_blk: leafportblkname
    from_port: 13
    to_port: 13
    from_sub_port: 1
    to_sub_port: 3
    state: present
  delegate_to: localhost

- name: Remove an access sub port block from an interface selector
  aci_access_sub_port_block_to_access_port:
    host: apic
    username: admin
    password: SomeSecretPassword
    leaf_interface_profile: leafintprfname
    access_port_selector: accessportselectorname
    leaf_port_blk: leafportblkname
    from_port: 13
    to_port: 13
    from_sub_port: 1
    to_sub_port: 1
    state: absent
  delegate_to: localhost

- name: Query Specific access sub port block under given access port selector
  aci_access_sub_port_block_to_access_port:
    host: apic
    username: admin
    password: SomeSecretPassword
    leaf_interface_profile: leafintprfname
    access_port_selector: accessportselectorname
    leaf_port_blk: leafportblkname
    state: query
  delegate_to: localhost
  register: query_result

- name: Query all access sub port blocks under given leaf interface profile
  aci_access_sub_port_block_to_access_port:
    host: apic
    username: admin
    password: SomeSecretPassword
    leaf_interface_profile: leafintprfname
    state: query
  delegate_to: localhost
  register: query_result

- name: Query all access sub port blocks in the fabric
  aci_access_sub_port_block_to_access_port:
    host: apic
    username: admin
    password: SomeSecretPassword
    state: query
  delegate_to: localhost
  register: query_result

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
current
list
success
The existing configuration from the APIC after the module has finished

Sample:
[{'fvTenant': {'attributes': {'descr': 'Production environment', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
error
dictionary
failure
The error information as returned from the APIC

Sample:
{'code': '122', 'text': 'unknown managed object class foo'}
filter_string
string
failure or debug
The filter string used for the request

Sample:
?rsp-prop-include=config-only
method
string
failure or debug
The HTTP method used for the request to the APIC

Sample:
POST
previous
list
info
The original configuration from the APIC before the module has started

Sample:
[{'fvTenant': {'attributes': {'descr': 'Production', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
proposed
dictionary
info
The assembled configuration from the user-provided parameters

Sample:
{'fvTenant': {'attributes': {'descr': 'Production environment', 'name': 'production'}}}
raw
string
parse error
The raw output returned by the APIC REST API (xml or json)

Sample:
<?xml version="1.0" encoding="UTF-8"?><imdata totalCount="1"><error code="122" text="unknown managed object class foo"/></imdata>
response
string
failure or debug
The HTTP response from the APIC

Sample:
OK (30 bytes)
sent
list
info
The actual/minimal configuration pushed to the APIC

Sample:
{'fvTenant': {'attributes': {'descr': 'Production environment'}}}
status
integer
failure or debug
The HTTP status from the APIC

Sample:
200
url
string
failure or debug
The HTTP url used for the request to the APIC

Sample:
https://10.11.12.13/api/mo/uni/tn-production.json


Status

Authors

  • Simon Metzger (@smnmtzgr)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.