bigip_provision – Manage BIG-IP module provisioning

New in version 2.4.

Synopsis

• Manage BIG-IP module provisioning. This module will only provision at the standard levels of Dedicated, Nominal, and Minimum.

Parameters

Parameter		Choices/Defaults	Comments
level string		Choices: dedicated nominal ← minimum	Sets the provisioning level for the requested modules. Changing the level for one module may require modifying the level of another module. For example, changing one module to dedicated requires setting all others to none. Setting the level of a module to none means that the module is not activated. Use state absent to set c(level) to none and de-provision module. This parameter is not relevant to cgnat - pre tmos 15.0 or mgmt and will not be applied to the cgnat - pre tmos 15.0 or mgmt module.
memory string added in 2.9			Sets additional memory for management module. This is in addition to minimum allocated RAM of 1264MB. The accepted value range is 0 - 8192. Maximum value is restricted by systems available RAM. Specifying large reserves an additional 500MB for mgmt module. Specifying medium reserves an additional 200MB for mgmt module. Specifying small reserves no additional RAM for mgmt module. Use large for configurations containing more than 2000 objects, or more specifically, for any configuration that exceeds 1000 objects per 2 GB of installed memory. Changing the Management mgmt size after initial provisioning causes a reprovision operation
module string / required		Choices: am afm apm asm avr cgnat fps gtm ilx lc ltm mgmt pem sam sslo swg urldb vcmp	The module to provision in BIG-IP. aliases: name
provider dictionary added in 2.5			A dict object containing connection details.
	auth_provider string		Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable F5_PASSWORD. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable F5_SERVER.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT.
	ssh_keyfile path		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: cli rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER.
	validate_certs boolean	Choices: no yes ←	If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
state string		Choices: present ← absent	The state of the provisioned module on the system. When present, guarantees that the specified module is provisioned at the requested level provided that there are sufficient resources on the device (such as physical RAM) to support the provisioned module. When absent, de-provision the module. absent, is not a relevant option to mgmt module as module can not be de-provisioned.

Notes

Note

• For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.

• Requires BIG-IP software version >= 12.

• The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Provision PEM at "nominal" level
  bigip_provision:
    module: pem
    level: nominal
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost

- name: Provision a dedicated SWG. This will unprovision every other module
  bigip_provision:
    module: swg
    level: dedicated
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost

- name: Provision mgmt with medium amount of memory.
  bigip_provision:
    module: mgmt
    memory: medium
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
level string	changed	The new provisioning level of the module. Sample: minimum
memory string	changed	The new provisioned amount of memory for mgmt module. Sample: large

Status

• This module is guaranteed to have backward compatible interface changes going forward. [stableinterface]

• This module is maintained by an Ansible Partner. [certified]

Authors

• Tim Rupp (@caphrim007)

• Greg Crosby (@crosbygw)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.