eos_lacp_interfaces – Manage Link Aggregation Control Protocol (LACP) attributes of interfaces on Arista EOS devices¶
New in version 2.9.
Synopsis¶
This module manages Link Aggregation Control Protocol (LACP) attributes of interfaces on Arista EOS devices.
Parameters¶
Notes¶
Note
Tested against Arista EOS 4.20.10M
This module works with connection
network_cli
. See the EOS Platform Options.
Examples¶
# Using merged
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
# lacp port-priority 30
# interface Ethernet2
# lacp rate fast
- name: Merge provided configuration with device configuration
eos_lacp_interfaces:
config:
- name: Ethernet1
rate: fast
- name: Ethernet2
rate: normal
state: merged
#
# -----------
# After state
# -----------
#
# veos#show run | section ^interface
# interface Ethernet1
# lacp port-priority 30
# lacp rate fast
# interface Ethernet2
# Using replaced
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
# lacp port-priority 30
# interface Ethernet2
# lacp rate fast
- name: Replace existing LACP configuration of specified interfaces with provided configuration
eos_lacp_interfaces:
config:
- name: Ethernet1
rate: fast
state: replaced
#
# -----------
# After state
# -----------
#
# veos#show run | section ^interface
# interface Ethernet1
# lacp rate fast
# interface Ethernet2
# lacp rate fast
# Using overridden
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
# lacp port-priority 30
# interface Ethernet2
# lacp rate fast
- name: Override the LACP configuration of all the interfaces with provided configuration
eos_lacp_interfaces:
config:
- name: Ethernet1
rate: fast
state: overridden
#
# -----------
# After state
#
#
# veos#show run | section ^interface
# interface Ethernet1
# lacp rate fast
# interface Ethernet2
# Using deleted
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
# lacp port-priority 30
# interface Ethernet2
# lacp rate fast
- name: Delete LACP attributes of given interfaces (or all interfaces if none specified).
eos_lacp_interfaces:
state: deleted
#
# -----------
# After state
# -----------
#
# veos#show run | section ^interface
# interface Ethernet1
# interface Ethernet2
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
Status¶
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Network Team. [network]
Red Hat Support¶
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors¶
Nathaniel Case (@Qalthos)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.