eos_lag_interfaces – Manages link aggregation groups on Arista EOS devices

New in version 2.9.

Synopsis

• This module manages attributes of link aggregation groups on Arista EOS devices.

Parameters

Parameter			Choices/Defaults	Comments
config list / elements=dictionary				A list of link aggregation group configurations.
	members list / elements=dictionary			Ethernet interfaces that are part of the group.
		member string		Name of ethernet interface that is a member of the LAG.
		mode string	Choices: active on passive	LAG mode for this interface.
	name string / required			Name of the port-channel interface of the link aggregation group (LAG) e.g., Port-Channel5.
state string			Choices: merged ← replaced overridden deleted	The state of the configuration after module completion.

Notes

Note

• Tested against Arista EOS 4.20.10M

• This module works with connection network_cli. See the EOS Platform Options.

Examples

---

# Using merged

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#   channel group 5 mode on
# interface Ethernet2

- name: Merge provided LAG attributes with existing device configuration
  eos_lag_interfaces:
    config:
      - name: 5
        members:
          - member: Ethernet2
            mode: on
    state: merged

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
#   channel group 5 mode on
# interface Ethernet2
#   channel group 5 mode on


# Using replaced

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#   channel group 5 mode on
# interface Ethernet2

- name: Replace all device configuration of specified LAGs with provided configuration
  eos_lag_interfaces:
    config:
      - name: 5
        members:
          - member: Ethernet2
            mode: on
    state: replaced

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# interface Ethernet2
#   channel group 5 mode on


# Using overridden

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#   channel group 5 mode on
# interface Ethernet2

- name: Override all device configuration of all LAG attributes with provided configuration
  eos_lag_interfaces:
    config:
      - name: 10
        members:
          - member: Ethernet2
            mode: on
    state: overridden

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# interface Ethernet2
#   channel group 10 mode on


# Using deleted

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#   channel group 5 mode on
# interface Ethernet2
#   channel group 5 mode on

- name: Delete LAG attributes of the given interfaces.
  eos_lag_interfaces:
    config:
      - name: 5
        members:
          - member: Ethernet1
    state: deleted

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# interface Ethernet2
#   channel group 5 mode on

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list	always	The set of commands pushed to the remote device. Sample: ['command 1', 'command 2', 'command 3']

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by the Ansible Network Team. [network]

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

• Nathaniel Case (@Qalthos)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.