fortios_dlp_sensor – Configure DLP sensors in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

• This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify dlp feature and sensor category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.5

Requirements

The below requirements are needed on the host that executes this module.

• fortiosapi>=0.9.8

Parameters

Parameter				Choices/Defaults	Comments
dlp_sensor dictionary					Configure DLP sensors.
	comment string				Comment.
	dlp_log string			Choices: enable disable	Enable/disable DLP logging.
	extended_log string			Choices: enable disable	Enable/disable extended logging for data leak prevention.
	filter list				Set up DLP filters for this sensor.
		action string		Choices: allow log-only block quarantine-ip	Action to take with content that this DLP sensor matches.
		archive string		Choices: disable enable	Enable/disable DLP archiving.
		company_identifier string			Enter a company identifier watermark to match. Only watermarks that your company has placed on the files are matched.
		expiry string			Quarantine duration in days, hours, minutes format (dddhhmm).
		file_size integer			Match files this size or larger (0 - 4294967295 kbytes).
		file_type integer			Select the number of a DLP file pattern table to match. Source dlp.filepattern.id.
		filter_by string		Choices: credit-card ssn regexp file-type file-size fingerprint watermark encrypted	Select the type of content to match.
		fp_sensitivity list			Select a DLP file pattern sensitivity to match.
			name string / required		Select a DLP sensitivity. Source dlp.fp-sensitivity.name.
		id integer / required			ID.
		match_percentage integer			Percentage of fingerprints in the fingerprint databases designated with the selected fp-sensitivity to match.
		name string			Filter name.
		proto string		Choices: smtp pop3 imap http-get http-post ftp nntp mapi mm1 mm3 mm4 mm7	Check messages or files over one or more of these protocols.
		regexp string			Enter a regular expression to match (max. 255 characters).
		severity string		Choices: info low medium high critical	Select the severity or threat level that matches this filter.
		type string		Choices: file message	Select whether to check the content of messages (an email message) or files (downloaded files or email attachments).
	flow_based string			Choices: enable disable	Enable/disable flow-based DLP.
	full_archive_proto string			Choices: smtp pop3 imap http-get http-post ftp nntp mapi mm1 mm3 mm4 mm7	Protocols to always content archive.
	nac_quar_log string			Choices: enable disable	Enable/disable NAC quarantine logging.
	name string / required				Name of the DLP sensor.
	options string				Configure DLP options.
	replacemsg_group string				Replacement message group used by this DLP sensor. Source system.replacemsg-group.name.
	state string			Choices: present absent	Deprecated Starting with Ansible 2.9 we recommend using the top-level 'state' parameter. Indicates whether to create or remove the object.
	summary_proto string			Choices: smtp pop3 imap http-get http-post ftp nntp mapi mm1 mm3 mm4 mm7	Protocols to always log summary.
host string					FortiOS or FortiGate IP address.
https boolean				Choices: no yes ←	Indicates if the requests towards FortiGate must use HTTPS protocol.
password string				Default: ""	FortiOS or FortiGate password.
ssl_verify boolean added in 2.9				Choices: no yes ←	Ensures FortiGate certificate must be verified by a proper CA.
state string added in 2.9				Choices: present absent	Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
username string					FortiOS or FortiGate username.
vdom string				Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

• Requires fortiosapi library developed by Fortinet

• Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
   ssl_verify: "False"
  tasks:
  - name: Configure DLP sensors.
    fortios_dlp_sensor:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      state: "present"
      dlp_sensor:
        comment: "Comment."
        dlp_log: "enable"
        extended_log: "enable"
        filter:
         -
            action: "allow"
            archive: "disable"
            company_identifier:  "myId_9"
            expiry: "<your_own_value>"
            file_size: "11"
            file_type: "12 (source dlp.filepattern.id)"
            filter_by: "credit-card"
            fp_sensitivity:
             -
                name: "default_name_15 (source dlp.fp-sensitivity.name)"
            id:  "16"
            match_percentage: "17"
            name: "default_name_18"
            proto: "smtp"
            regexp: "<your_own_value>"
            severity: "info"
            type: "file"
        flow_based: "enable"
        full_archive_proto: "smtp"
        nac_quar_log: "enable"
        name: "default_name_26"
        options: "<your_own_value>"
        replacemsg_group: "<your_own_value> (source system.replacemsg-group.name)"
        summary_proto: "smtp"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by the Ansible Community. [community]

Authors

• Miguel Angel Munoz (@mamunozgonzalez)

• Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.