fortios_system_accprofile – Configure access profiles for system administrators in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and accprofile category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.5

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments
host
string
FortiOS or FortiGate IP address.
https
boolean
    Choices:
  • no
  • yes ←
Indicates if the requests towards FortiGate must use HTTPS protocol.
password
string
Default:
""
FortiOS or FortiGate password.
ssl_verify
boolean
added in 2.9
    Choices:
  • no
  • yes ←
Ensures FortiGate certificate must be verified by a proper CA.
state
string
added in 2.9
    Choices:
  • present
  • absent
Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
system_accprofile
dictionary
Configure access profiles for system administrators.
admintimeout
integer
Administrator timeout for this access profile (0 - 480 min).
admintimeout_override
string
    Choices:
  • enable
  • disable
Enable/disable overriding the global administrator idle timeout.
authgrp
string
    Choices:
  • none
  • read
  • read-write
Administrator access to Users and Devices.
comments
string
Comment.
ftviewgrp
string
    Choices:
  • none
  • read
  • read-write
FortiView.
fwgrp
string
    Choices:
  • none
  • read
  • read-write
  • custom
Administrator access to the Firewall configuration.
fwgrp_permission
dictionary
Custom firewall permission.
address
string
    Choices:
  • none
  • read
  • read-write
Address Configuration.
policy
string
    Choices:
  • none
  • read
  • read-write
Policy Configuration.
schedule
string
    Choices:
  • none
  • read
  • read-write
Schedule Configuration.
service
string
    Choices:
  • none
  • read
  • read-write
Service Configuration.
loggrp
string
    Choices:
  • none
  • read
  • read-write
  • custom
Administrator access to Logging and Reporting including viewing log messages.
loggrp_permission
dictionary
Custom Log & Report permission.
config
string
    Choices:
  • none
  • read
  • read-write
Log & Report configuration.
data_access
string
    Choices:
  • none
  • read
  • read-write
Log & Report Data Access.
report_access
string
    Choices:
  • none
  • read
  • read-write
Log & Report Report Access.
threat_weight
string
    Choices:
  • none
  • read
  • read-write
Log & Report Threat Weight.
name
string / required
Profile name.
netgrp
string
    Choices:
  • none
  • read
  • read-write
  • custom
Network Configuration.
netgrp_permission
dictionary
Custom network permission.
cfg
string
    Choices:
  • none
  • read
  • read-write
Network Configuration.
packet_capture
string
    Choices:
  • none
  • read
  • read-write
Packet Capture Configuration.
route_cfg
string
    Choices:
  • none
  • read
  • read-write
Router Configuration.
scope
string
    Choices:
  • vdom
  • global
Scope of admin access: global or specific VDOs.
secfabgrp
string
    Choices:
  • none
  • read
  • read-write
Security Fabric.
state
string
    Choices:
  • present
  • absent
Deprecated
Starting with Ansible 2.9 we recommend using the top-level 'state' parameter.

Indicates whether to create or remove the object.
sysgrp
string
    Choices:
  • none
  • read
  • read-write
  • custom
System Configuration.
sysgrp_permission
dictionary
Custom system permission.
admin
string
    Choices:
  • none
  • read
  • read-write
Administrator Users.
cfg
string
    Choices:
  • none
  • read
  • read-write
System Configuration.
mnt
string
    Choices:
  • none
  • read
  • read-write
Maintenance.
upd
string
    Choices:
  • none
  • read
  • read-write
FortiGuard Updates.
utmgrp
string
    Choices:
  • none
  • read
  • read-write
  • custom
Administrator access to Security Profiles.
utmgrp_permission
dictionary
Custom Security Profile permissions.
antivirus
string
    Choices:
  • none
  • read
  • read-write
Antivirus profiles and settings.
application_control
string
    Choices:
  • none
  • read
  • read-write
Application Control profiles and settings.
data_loss_prevention
string
    Choices:
  • none
  • read
  • read-write
DLP profiles and settings.
dnsfilter
string
    Choices:
  • none
  • read
  • read-write
DNS Filter profiles and settings.
endpoint_control
string
    Choices:
  • none
  • read
  • read-write
FortiClient Profiles.
icap
string
    Choices:
  • none
  • read
  • read-write
ICAP profiles and settings.
ips
string
    Choices:
  • none
  • read
  • read-write
IPS profiles and settings.
spamfilter
string
    Choices:
  • none
  • read
  • read-write
AntiSpam filter and settings.
voip
string
    Choices:
  • none
  • read
  • read-write
VoIP profiles and settings.
waf
string
    Choices:
  • none
  • read
  • read-write
Web Application Firewall profiles and settings.
webfilter
string
    Choices:
  • none
  • read
  • read-write
Web Filter profiles and settings.
vpngrp
string
    Choices:
  • none
  • read
  • read-write
Administrator access to IPsec, SSL, PPTP, and L2TP VPN.
wanoptgrp
string
    Choices:
  • none
  • read
  • read-write
Administrator access to WAN Opt & Cache.
wifi
string
    Choices:
  • none
  • read
  • read-write
Administrator access to the WiFi controller and Switch controller.
username
string
FortiOS or FortiGate username.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Requires fortiosapi library developed by Fortinet

  • Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
   ssl_verify: "False"
  tasks:
  - name: Configure access profiles for system administrators.
    fortios_system_accprofile:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      state: "present"
      system_accprofile:
        admintimeout: "3"
        admintimeout_override: "enable"
        authgrp: "none"
        comments: "<your_own_value>"
        ftviewgrp: "none"
        fwgrp: "none"
        fwgrp_permission:
            address: "none"
            policy: "none"
            schedule: "none"
            service: "none"
        loggrp: "none"
        loggrp_permission:
            config: "none"
            data_access: "none"
            report_access: "none"
            threat_weight: "none"
        name: "default_name_20"
        netgrp: "none"
        netgrp_permission:
            cfg: "none"
            packet_capture: "none"
            route_cfg: "none"
        scope: "vdom"
        secfabgrp: "none"
        sysgrp: "none"
        sysgrp_permission:
            admin: "none"
            cfg: "none"
            mnt: "none"
            upd: "none"
        utmgrp: "none"
        utmgrp_permission:
            antivirus: "none"
            application_control: "none"
            data_loss_prevention: "none"
            dnsfilter: "none"
            endpoint_control: "none"
            icap: "none"
            ips: "none"
            spamfilter: "none"
            voip: "none"
            waf: "none"
            webfilter: "none"
        vpngrp: "none"
        wanoptgrp: "none"
        wifi: "none"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.