fortios_user_radius – Configure RADIUS server entries in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

• This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify user feature and radius category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.5

Requirements

The below requirements are needed on the host that executes this module.

• fortiosapi>=0.9.8

Parameters

Parameter			Choices/Defaults	Comments
host string				FortiOS or FortiGate IP address.
https boolean			Choices: no yes ←	Indicates if the requests towards FortiGate must use HTTPS protocol.
password string			Default: ""	FortiOS or FortiGate password.
ssl_verify boolean added in 2.9			Choices: no yes ←	Ensures FortiGate certificate must be verified by a proper CA.
state string added in 2.9			Choices: present absent	Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
user_radius dictionary				Configure RADIUS server entries.
	accounting_server list			Additional accounting servers.
		id integer / required		ID (0 - 4294967295).
		port integer		RADIUS accounting port number.
		secret string		Secret key.
		server string		name_str or ip_str Server CN domain name or IP.
		source_ip string		Source IP address for communications to the RADIUS server.
		status string	Choices: enable disable	Status.
	acct_all_servers string		Choices: enable disable	Enable/disable sending of accounting messages to all configured servers.
	acct_interim_interval integer			Time in seconds between each accounting interim update message.
	all_usergroup string		Choices: disable enable	Enable/disable automatically including this RADIUS server in all user groups.
	auth_type string		Choices: auto ms_chap_v2 ms_chap chap pap	Authentication methods/protocols permitted for this RADIUS server.
	class list			Class attribute name(s).
		name string / required		Class name.
	h3c_compatibility string		Choices: enable disable	Enable/disable compatibility with the H3C, a mechanism that performs security checking for authentication.
	name string / required			RADIUS server entry name.
	nas_ip string			IP address used to communicate with the RADIUS server and used as NAS-IP-Address and Called-Station-ID attributes.
	password_encoding string		Choices: auto ISO-8859-1	Password encoding.
	password_renewal string		Choices: enable disable	Enable/disable password renewal.
	radius_coa string		Choices: enable disable	Enable to allow a mechanism to change the attributes of an authentication, authorization, and accounting session after it is authenticated.
	radius_port integer			RADIUS service port number.
	rsso string		Choices: enable disable	Enable/disable RADIUS based single sign on feature.
	rsso_context_timeout integer			Time in seconds before the logged out user is removed from the "user context list" of logged on users.
	rsso_endpoint_attribute string		Choices: User-Name NAS-IP-Address Framed-IP-Address Framed-IP-Netmask Filter-Id Login-IP-Host Reply-Message Callback-Number Callback-Id Framed-Route Framed-IPX-Network Class Called-Station-Id Calling-Station-Id NAS-Identifier Proxy-State Login-LAT-Service Login-LAT-Node Login-LAT-Group Framed-AppleTalk-Zone Acct-Session-Id Acct-Multi-Session-Id	RADIUS attributes used to extract the user end point identifier from the RADIUS Start record.
	rsso_endpoint_block_attribute string		Choices: User-Name NAS-IP-Address Framed-IP-Address Framed-IP-Netmask Filter-Id Login-IP-Host Reply-Message Callback-Number Callback-Id Framed-Route Framed-IPX-Network Class Called-Station-Id Calling-Station-Id NAS-Identifier Proxy-State Login-LAT-Service Login-LAT-Node Login-LAT-Group Framed-AppleTalk-Zone Acct-Session-Id Acct-Multi-Session-Id	RADIUS attributes used to block a user.
	rsso_ep_one_ip_only string		Choices: enable disable	Enable/disable the replacement of old IP addresses with new ones for the same endpoint on RADIUS accounting Start messages.
	rsso_flush_ip_session string		Choices: enable disable	Enable/disable flushing user IP sessions on RADIUS accounting Stop messages.
	rsso_log_flags string		Choices: protocol-error profile-missing accounting-stop-missed accounting-event endpoint-block radiusd-other none	Events to log.
	rsso_log_period integer			Time interval in seconds that group event log messages will be generated for dynamic profile events.
	rsso_radius_response string		Choices: enable disable	Enable/disable sending RADIUS response packets after receiving Start and Stop records.
	rsso_radius_server_port integer			UDP port to listen on for RADIUS Start and Stop records.
	rsso_secret string			RADIUS secret used by the RADIUS accounting server.
	rsso_validate_request_secret string		Choices: enable disable	Enable/disable validating the RADIUS request shared secret in the Start or End record.
	secondary_secret string			Secret key to access the secondary server.
	secondary_server string			name_str or ip_str secondary RADIUS CN domain name or IP.
	secret string			Pre-shared secret key used to access the primary RADIUS server.
	server string			Primary RADIUS server CN domain name or IP address.
	source_ip string			Source IP address for communications to the RADIUS server.
	sso_attribute string		Choices: User-Name NAS-IP-Address Framed-IP-Address Framed-IP-Netmask Filter-Id Login-IP-Host Reply-Message Callback-Number Callback-Id Framed-Route Framed-IPX-Network Class Called-Station-Id Calling-Station-Id NAS-Identifier Proxy-State Login-LAT-Service Login-LAT-Node Login-LAT-Group Framed-AppleTalk-Zone Acct-Session-Id Acct-Multi-Session-Id	RADIUS attribute that contains the profile group name to be extracted from the RADIUS Start record.
	sso_attribute_key string			Key prefix for SSO group value in the SSO attribute.
	sso_attribute_value_override string		Choices: enable disable	Enable/disable override old attribute value with new value for the same endpoint.
	state string		Choices: present absent	Deprecated Starting with Ansible 2.9 we recommend using the top-level 'state' parameter. Indicates whether to create or remove the object.
	tertiary_secret string			Secret key to access the tertiary server.
	tertiary_server string			name_str or ip_str tertiary RADIUS CN domain name or IP.
	timeout integer			Time in seconds between re-sending authentication requests.
	use_management_vdom string		Choices: enable disable	Enable/disable using management VDOM to send requests.
	username_case_sensitive string		Choices: enable disable	Enable/disable case sensitive user names.
username string				FortiOS or FortiGate username.
vdom string			Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

• Requires fortiosapi library developed by Fortinet

• Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
   ssl_verify: "False"
  tasks:
  - name: Configure RADIUS server entries.
    fortios_user_radius:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      state: "present"
      user_radius:
        accounting_server:
         -
            id:  "4"
            port: "5"
            secret: "<your_own_value>"
            server: "192.168.100.40"
            source_ip: "84.230.14.43"
            status: "enable"
        acct_all_servers: "enable"
        acct_interim_interval: "11"
        all_usergroup: "disable"
        auth_type: "auto"
        class:
         -
            name: "default_name_15"
        h3c_compatibility: "enable"
        name: "default_name_17"
        nas_ip: "<your_own_value>"
        password_encoding: "auto"
        password_renewal: "enable"
        radius_coa: "enable"
        radius_port: "22"
        rsso: "enable"
        rsso_context_timeout: "24"
        rsso_endpoint_attribute: "User-Name"
        rsso_endpoint_block_attribute: "User-Name"
        rsso_ep_one_ip_only: "enable"
        rsso_flush_ip_session: "enable"
        rsso_log_flags: "protocol-error"
        rsso_log_period: "30"
        rsso_radius_response: "enable"
        rsso_radius_server_port: "32"
        rsso_secret: "<your_own_value>"
        rsso_validate_request_secret: "enable"
        secondary_secret: "<your_own_value>"
        secondary_server: "<your_own_value>"
        secret: "<your_own_value>"
        server: "192.168.100.40"
        source_ip: "84.230.14.43"
        sso_attribute: "User-Name"
        sso_attribute_key: "<your_own_value>"
        sso_attribute_value_override: "enable"
        tertiary_secret: "<your_own_value>"
        tertiary_server: "<your_own_value>"
        timeout: "45"
        use_management_vdom: "enable"
        username_case_sensitive: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by the Ansible Community. [community]

Authors

• Miguel Angel Munoz (@mamunozgonzalez)

• Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.