icx_static_route – Manage static IP routes on Ruckus ICX 7000 series switches

New in version 2.9.

Synopsis

  • This module provides declarative management of static IP routes on Ruckus ICX network devices.

Parameters

Parameter Choices/Defaults Comments
admin_distance
integer
Admin distance of the static route. Range is 1 to 255.
aggregate
list
List of static route definitions.
admin_distance
integer
Admin distance of the static route. Range is 1 to 255.
check_running_config
boolean
    Choices:
  • no
  • yes
Check running configuration. This can be set as environment variable. Module will use environment variable value(default:True), unless it is overridden, by specifying it as module parameter.
mask
string
Network prefix mask of the static route.
next_hop
string
Next hop IP of the static route.
prefix
string
Network prefix of the static route.
state
string
    Choices:
  • present
  • absent
State of the static route configuration.
check_running_config
boolean
    Choices:
  • no
  • yes ←
Check running configuration. This can be set as environment variable. Module will use environment variable value(default:True), unless it is overridden, by specifying it as module parameter.
mask
string
Network prefix mask of the static route.
next_hop
string
Next hop IP of the static route.
prefix
string
Network prefix of the static route.
purge
boolean
    Choices:
  • no ←
  • yes
Purge routes not defined in the aggregate parameter.
state
string
    Choices:
  • present ←
  • absent
State of the static route configuration.

Notes

Note

Examples

- name: configure static route
  icx_static_route:
    prefix: 192.168.2.0/24
    next_hop: 10.0.0.1

- name: remove configuration
  icx_static_route:
    prefix: 192.168.2.0
    mask: 255.255.255.0
    next_hop: 10.0.0.1
    state: absent

- name: Add static route aggregates
  icx_static_route:
    aggregate:
      - { prefix: 172.16.32.0, mask: 255.255.255.0, next_hop: 10.0.0.8 }
      - { prefix: 172.16.33.0, mask: 255.255.255.0, next_hop: 10.0.0.8 }

- name: remove static route aggregates
  icx_static_route:
    aggregate:
      - { prefix: 172.16.32.0, mask: 255.255.255.0, next_hop: 10.0.0.8 }
      - { prefix: 172.16.33.0, mask: 255.255.255.0, next_hop: 10.0.0.8 }
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list
always
The list of configuration mode commands to send to the device

Sample:
['ip route 192.168.2.0 255.255.255.0 10.0.0.1']


Status

Authors

  • Ruckus Wireless (@Commscope)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.