junos_lldp_global – Manage link layer discovery protocol (LLDP) attributes on Juniper JUNOS devices

New in version 2.9.

Synopsis

• This module manages link layer discovery protocol (LLDP) attributes on Juniper JUNOS devices.

Requirements

The below requirements are needed on the host that executes this module.

• ncclient (>=v0.6.4)

Parameters

Parameter		Choices/Defaults	Comments
config dictionary			The list of link layer discovery protocol attribute configurations
	address string		This argument sets the management address from LLDP.
	enabled boolean	Choices: no yes	This argument is a boolean value to enabled or disable LLDP.
	hold_multiplier integer		Specify the number of seconds that LLDP information is held before it is discarded. The multiplier value is used in combination with the interval value.
	interval integer		Frequency at which LLDP advertisements are sent (in seconds).
	transmit_delay integer		Specify the number of seconds the device waits before sending advertisements to neighbors after a change is made in local system.
state string		Choices: merged ← replaced deleted	The state of the configuration after module completion.

Notes

Note

• This module requires the netconf system service be enabled on the remote device being managed.

• Tested against vSRX JUNOS version 18.4R1.

• This module works with connection netconf. See the Junos OS Platform Options.

Examples

# Using merged
# Before state:
# -------------
# user@junos01# # show protocols lldp
#
- name: Merge provided configuration with device configuration
  junos_lldp_global:
    config:
      interval: 10000
      address: 10.1.1.1
      transmit_delay: 400
      hold_multiplier: 10
    state: merged

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;

# Using replaced
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;

- name: Replace provided configuration with device configuration
  junos_lldp_global:
    config:
      address: 20.2.2.2
      hold_multiplier: 30
      enabled: False
    state: replaced

# After state:
# -------------
# user@junos01# show protocols lldp
# disable;
# management-address 20.2.2.2;
# hold-multiplier 30;

# Using deleted
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 20.2.2.2;
# hold-multiplier 30;

- name: Delete lldp configuration (this will by default remove all lldp configuration)
  junos_lldp_global:
    state: deleted

# After state:
# -------------
# user@junos01# # show protocols lldp
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after dictionary	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before dictionary	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list	always	The set of commands pushed to the remote device. Sample: ['xml 1', 'xml 2', 'xml 3']

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by the Ansible Network Team. [network]

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

• Ganesh Nalawade (@ganeshrn)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.