net_linkagg – Manage link aggregation groups on network devices

New in version 2.4.

DEPRECATED

Removed in Ansible

version: 2.13

Why

Updated modules released with more functionality

Alternative

Use platform-specific “[netos]_lag_interfaces” module

Synopsis

• This module provides declarative management of link aggregation groups on network devices.

Parameters

Parameter	Choices/Defaults	Comments
aggregate -		List of link aggregation definitions.
members - / required		List of members interfaces of the link aggregation group. The value can be single interface or list of interfaces.
min_links -		Minimum members that should be up before bringing up the link aggregation group.
mode -	Choices: on active passive Default: "yes"	Mode of the link aggregation group. A value of on will enable LACP. active configures the link to actively information about the state of the link, or it can be configured in passive mode ie. send link state information only when received them from another link.
name - / required		Name of the link aggregation group.
purge -	Default: "no"	Purge link aggregation groups not defined in the aggregate parameter.
state -	Choices: present ← absent up down	State of the link aggregation group.

Notes

Note

• This module is supported on ansible_network_os network platforms. See the Network Platform Options for details.

Examples

- name: configure link aggregation group
  net_linkagg:
    name: bond0
    members:
      - eth0
      - eth1

- name: remove configuration
  net_linkagg:
    name: bond0
    state: absent

- name: Create aggregate of linkagg definitions
  net_linkagg:
    aggregate:
        - { name: bond0, members: [eth1] }
        - { name: bond1, members: [eth2] }

- name: Remove aggregate of linkagg definitions
  net_linkagg:
    aggregate:
      - name: bond0
      - name: bond1
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always, except for the platforms that use Netconf transport to manage the device.	The list of configuration mode commands to send to the device Sample: ['set interfaces bonding bond0', "set interfaces ethernet eth0 bond-group 'bond0'", "set interfaces ethernet eth1 bond-group 'bond0'"]

Status

• This module will be removed in version 2.13. [deprecated]

• For more information see DEPRECATED.

Authors

• Ricardo Carrillo Cruz (@rcarrillocruz)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.