onyx_qos – Configures QoS

New in version 2.9.

Synopsis

• This module provides declarative management of Onyx QoS configuration on Mellanox ONYX network devices.

Parameters

Parameter	Choices/Defaults	Comments
interfaces - / required		list of interfaces name.
rewrite_dscp -	Choices: enabled disabled ←	rewrite with type dscp.
rewrite_pcp -	Choices: enabled disabled ←	rewrite with type pcp.
trust -	Choices: L2 ← L3 both	trust type.

Notes

Note

• Tested on ONYX 3.6.8130

Examples

- name: configure QoS
  onyx_QoS:
    interfaces:
      - Mpo7
      - Mpo7
    trust: L3
    rewrite_pcp: disabled
    rewrite_dscp: enabled

- name: configure QoS
  onyx_QoS:
    interfaces:
      - Eth1/1
      - Eth1/2
    trust: both
    rewrite_pcp: disabled
    rewrite_dscp: enabled

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always	The list of configuration mode commands to send to the device. Sample: ['interface ethernet 1/16 qos trust L3', 'interface mlag-port-channel 7 qos trust L3', 'interface port-channel 1 qos trust L3', 'interface mlag-port-channel 7 qos trust L2', 'interface mlag-port-channel 7 qos rewrite dscp', 'interface ethernet 1/16 qos rewrite pcp', 'interface ethernet 1/1 no qos rewrite pcp']

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by the Ansible Community. [community]

Authors

• Anas Badaha (@anasb)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.