openssh_cert – Generate OpenSSH host or user certificates¶

New in version 2.8.

Synopsis
Requirements
Parameters
Examples
Return Values
Status

Synopsis ¶

Generate and regenerate OpenSSH host or user certificates.

Requirements ¶

The below requirements are needed on the host that executes this module.

ssh-keygen

Parameters ¶

Parameter	Choices/Defaults	Comments
attributes string		The attributes the resulting file or directory should have. To get supported flags look at the man page for chattr on the target system. This string should contain the attributes in the same order as the one displayed by lsattr. The `=` operator is assumed as default, otherwise `+` or `-` operators need to be included in the string. aliases: attr
force boolean	Choices: no ← yes	Should the certificate be regenerated even if it already exists and is valid.
group string		Name of the group that should own the file/directory, as would be fed to chown.
identifier string		Specify the key identity when signing a public key. The identifier that is logged by the server when the certificate is used for authentication.
mode string		The permissions the resulting file or directory should have. For those used to /usr/bin/chmod remember that modes are actually octal numbers. You must either add a leading zero so that Ansible's YAML parser knows it is an octal number (like `0644` or `01777`) or quote it (like `'644'` or `'1777'`) so Ansible receives a string and can do its own conversion from string into number. Giving Ansible a number without following one of these rules will end up with a decimal number which will have unexpected results. As of Ansible 1.8, the mode may be specified as a symbolic mode (for example, `u+rwx` or `u=rw,g=r,o=r`).
options list / elements=string		Specify certificate options when signing a key. The option that are valid for user certificates are: `clear`: Clear all enabled permissions. This is useful for clearing the default set of permissions so permissions may be added individually. `force-command=command`: Forces the execution of command instead of any shell or command specified by the user when the certificate is used for authentication. `no-agent-forwarding`: Disable ssh-agent forwarding (permitted by default). `no-port-forwarding`: Disable port forwarding (permitted by default). `no-pty Disable`: PTY allocation (permitted by default). `no-user-rc`: Disable execution of `~/.ssh/rc` by sshd (permitted by default). `no-x11-forwarding`: Disable X11 forwarding (permitted by default) `permit-agent-forwarding`: Allows ssh-agent forwarding. `permit-port-forwarding`: Allows port forwarding. `permit-pty`: Allows PTY allocation. `permit-user-rc`: Allows execution of `~/.ssh/rc` by sshd. `permit-x11-forwarding`: Allows X11 forwarding. `source-address=address_list`: Restrict the source addresses from which the certificate is considered valid. The `address_list` is a comma-separated list of one or more address/netmask pairs in CIDR format. At present, no options are valid for host keys.
owner string		Name of the user that should own the file/directory, as would be fed to chown.
path path / required		Path of the file containing the certificate.
principals list / elements=string		Certificates may be limited to be valid for a set of principal (user/host) names. By default, generated certificates are valid for all users or hosts.
public_key path		The path to the public key that will be signed with the signing key in order to generate the certificate. Required if state is `present`.
selevel string	Default: "s0"	The level part of the SELinux file context. This is the MLS/MCS attribute, sometimes known as the `range`. When set to `_default`, it will use the `level` portion of the policy if available.
serial_number integer		Specify the certificate serial number. The serial number is logged by the server when the certificate is used for authentication. The certificate serial number may be used in a KeyRevocationList. The serial number may be omitted for checks, but must be specified again for a new certificate. Note: The default value set by ssh-keygen is 0.
serole string		The role part of the SELinux file context. When set to `_default`, it will use the `role` portion of the policy if available.
setype string		The type part of the SELinux file context. When set to `_default`, it will use the `type` portion of the policy if available.
seuser string		The user part of the SELinux file context. By default it uses the `system` policy, where applicable. When set to `_default`, it will use the `user` portion of the policy if available.
signing_key path		The path to the private openssh key that is used for signing the public key in order to generate the certificate. Required if state is `present`.
state string	Choices: present ← absent	Whether the host or user certificate should exist or not, taking action if the state is different from what is stated.
type string	Choices: host user	Whether the module should generate a host or a user certificate. Required if state is `present`.
unsafe_writes boolean	Choices: no ← yes	Influence when to use atomic operation to prevent data corruption or inconsistent reads from the target file. By default this module uses atomic operations to prevent data corruption or inconsistent reads from the target files, but sometimes systems are configured or just broken in ways that prevent this. One example is docker mounted files, which cannot be updated atomically from inside the container and can only be written in an unsafe manner. This option allows Ansible to fall back to unsafe methods of updating files when atomic operations fail (however, it doesn't force Ansible to perform unsafe writes). IMPORTANT! Unsafe writes are subject to race conditions and can lead to data corruption.
valid_at string		Check if the certificate is valid at a certain point in time. If it is not the certificate will be regenerated. Time will always be interpreted as UTC. Mainly to be used with relative timespec for valid_from and / or valid_to. Note that if using relative time this module is NOT idempotent.
valid_from string		The point in time the certificate is valid from. Time can be specified either as relative time or as absolute timestamp. Time will always be interpreted as UTC. Valid formats are: `[+-]timespec \| YYYY-MM-DD \| YYYY-MM-DDTHH:MM:SS \| YYYY-MM-DD HH:MM:SS \| always` where timespec can be an integer + `[w \| d \| h \| m \| s]` (e.g. `+32w1d2h`. Note that if using relative time this module is NOT idempotent. Required if state is `present`.
valid_to string		The point in time the certificate is valid to. Time can be specified either as relative time or as absolute timestamp. Time will always be interpreted as UTC. Valid formats are: `[+-]timespec \| YYYY-MM-DD \| YYYY-MM-DDTHH:MM:SS \| YYYY-MM-DD HH:MM:SS \| forever` where timespec can be an integer + `[w \| d \| h \| m \| s]` (e.g. `+32w1d2h`. Note that if using relative time this module is NOT idempotent. Required if state is `present`.

Examples ¶

# Generate an OpenSSH user certificate that is valid forever and for all users
- openssh_cert:
    type: user
    signing_key: /path/to/private_key
    public_key: /path/to/public_key.pub
    path: /path/to/certificate
    valid_from: always
    valid_to: forever

# Generate an OpenSSH host certificate that is valid for 32 weeks from now and will be regenerated
# if it is valid for less than 2 weeks from the time the module is being run
- openssh_cert:
    type: host
    signing_key: /path/to/private_key
    public_key: /path/to/public_key.pub
    path: /path/to/certificate
    valid_from: +0s
    valid_to: +32w
    valid_at: +2w

# Generate an OpenSSH host certificate that is valid forever and only for example.com and examplehost
- openssh_cert:
    type: host
    signing_key: /path/to/private_key
    public_key: /path/to/public_key.pub
    path: /path/to/certificate
    valid_from: always
    valid_to: forever
    principals:
        - example.com
        - examplehost

# Generate an OpenSSH host Certificate that is valid from 21.1.2001 to 21.1.2019
- openssh_cert:
    type: host
    signing_key: /path/to/private_key
    public_key: /path/to/public_key.pub
    path: /path/to/certificate
    valid_from: "2001-01-21"
    valid_to: "2019-01-21"

# Generate an OpenSSH user Certificate with clear and force-command option:
- openssh_cert:
    type: user
    signing_key: /path/to/private_key
    public_key: /path/to/public_key.pub
    path: /path/to/certificate
    valid_from: always
    valid_to: forever
    options:
        - "clear"
        - "force-command=/tmp/bla/foo"

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
filename string	changed or success	path to the certificate Sample: /tmp/certificate-cert.pub
info list / elements=string	change or success	Information about the certificate. Output of `ssh-keygen -L -f`.
type string	changed or success	type of the certificate (host or user) Sample: host

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors¶

David Kainz (@lolcube)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

openssh_cert – Generate OpenSSH host or user certificates¶

Synopsis¶

Requirements¶

Parameters¶

Examples¶

Return Values¶

Status¶