ss_3par_cpg – Manage HPE StoreServ 3PAR CPG

New in version 2.8.

Synopsis

  • Create and delete CPG on HPE 3PAR.

Requirements

The below requirements are needed on the host that executes this module.

  • hpe3par_sdk >= 1.0.2. Install using ‘pip install hpe3par_sdk’

  • WSAPI service should be enabled on the 3PAR storage array.

Parameters

Parameter Choices/Defaults Comments
cpg_name
string / required
Name of the CPG.
disk_type
string
    Choices:
  • FC
  • NL
  • SSD
Specifies that physical disks must have the specified device type.
domain
string
Specifies the name of the domain in which the object will reside.
growth_increment
string
Specifies the growth increment(in MiB, GiB or TiB) the amount of logical disk storage created on each auto-grow operation.
growth_limit
string
Specifies that the autogrow operation is limited to the specified storage amount that sets the growth limit(in MiB, GiB or TiB).
growth_warning
string
Specifies that the threshold(in MiB, GiB or TiB) of used logical disk space when exceeded results in a warning alert.
high_availability
string
    Choices:
  • PORT
  • CAGE
  • MAG
Specifies that the layout must support the failure of one port pair, one cage, or one magazine.
raid_type
string
    Choices:
  • R0
  • R1
  • R5
  • R6
Specifies the RAID type for the logical disk.
secure
boolean
    Choices:
  • no ←
  • yes
Specifies whether the certificate needs to be validated while communicating.
set_size
integer
Specifies the set size in the number of chunklets.
state
string / required
    Choices:
  • present
  • absent
Whether the specified CPG should exist or not.
storage_system_ip
string / required
The storage system IP address.
storage_system_password
string / required
The storage system password.
storage_system_username
string / required
The storage system user name.

Notes

Note

  • check_mode not supported

Examples

- name: Create CPG sample_cpg
  ss_3par_cpg:
    storage_system_ip: 10.10.10.1
    storage_system_username: username
    storage_system_password: password
    state: present
    cpg_name: sample_cpg
    domain: sample_domain
    growth_increment: 32000 MiB
    growth_limit: 64000 MiB
    growth_warning: 48000 MiB
    raid_type: R6
    set_size: 8
    high_availability: MAG
    disk_type: FC
    secure: no

- name: Delete CPG sample_cpg
  ss_3par_cpg:
    storage_system_ip: 10.10.10.1
    storage_system_username: username
    storage_system_password: password
    state: absent
    cpg_name: sample_cpg
    secure: no

Status

Authors

  • Farhan Nomani (@farhan7500)

  • Gautham P Hegde (@gautamphegde)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.