vyos_command – Run one or more commands on VyOS devices¶
Synopsis¶
The command module allows running one or more commands on remote devices running VyOS. This module can also be introspected to validate key parameters before returning successfully. If the conditional statements are not met in the wait period, the task fails.
Certain
show
commands in VyOS produce many lines of output and use a custom pager that can cause this module to hang. If the value of the environment variableANSIBLE_VYOS_TERMINAL_LENGTH
is not set, the default number of 10000 is used.
Parameters¶
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
commands
-
/ required
|
The ordered set of commands to execute on the remote device running VyOS. The output from the command execution is returned to the playbook. If the wait_for argument is provided, the module is not returned until the condition is satisfied or the number of retries has been exceeded.
|
||
interval
-
|
Default: 1
|
Configures the interval in seconds to wait between retries of the command. If the command does not pass the specified conditions, the interval indicates how long to wait before trying the command again.
|
|
match
-
|
|
The match argument is used in conjunction with the wait_for argument to specify the match policy. Valid values are
all or any . If the value is set to all then all conditionals in the wait_for must be satisfied. If the value is set to any then only one of the values must be satisfied. |
|
provider
dictionary
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli .For more information please see the Network Guide.
A dict object containing connection details.
|
||
host
string
/ required
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
|
||
password
string
|
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_PASSWORD will be used instead. |
||
port
integer
|
Default: 22
|
Specifies the port to use when building the connection to the remote device.
|
|
ssh_keyfile
path
|
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_SSH_KEYFILE will be used instead. |
||
timeout
integer
|
Default: 10
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
|
|
username
string
|
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_USERNAME will be used instead. |
||
retries
-
|
Default: 10
|
Specifies the number of retries a command should be tried before it is considered failed. The command is run on the target device every retry and evaluated against the wait_for conditionals.
|
|
wait_for
-
|
Specifies what to evaluate from the output of the command and what conditionals to apply. This argument will cause the task to wait for a particular conditional to be true before moving forward. If the conditional is not true by the configured retries, the task fails. See examples.
aliases: waitfor |
Notes¶
Note
Tested against VyOS 1.1.8 (helium).
Running
show system boot-messages all
will cause the module to hang since VyOS is using a custom pager setting to display the output of that command.If a command sent to the device requires answering a prompt, it is possible to pass a dict containing command, answer and prompt. See examples.
This module works with connection
network_cli
. See the VyOS OS Platform Options.For more information on using Ansible to manage network devices see the Ansible Network Guide
Examples¶
tasks:
- name: show configuration on ethernet devices eth0 and eth1
vyos_command:
commands:
- show interfaces ethernet {{ item }}
with_items:
- eth0
- eth1
- name: run multiple commands and check if version output contains specific version string
vyos_command:
commands:
- show version
- show hardware cpu
wait_for:
- "result[0] contains 'VyOS 1.1.7'"
- name: run command that requires answering a prompt
vyos_command:
commands:
- command: 'rollback 1'
prompt: 'Proceed with reboot? [confirm][y]'
answer: y
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
Status¶
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Network Team. [network]
Red Hat Support¶
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors¶
Nathaniel Case (@Qalthos)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.