vyos_lldp_interfaces – Manages attributes of lldp interfaces on VyOS devices¶

New in version 2.9.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

This module manages attributes of lldp interfaces on VyOS network devices.

Parameters ¶

Parameter					Choices/Defaults	Comments
config list						A list of lldp interfaces configurations.
	enable boolean				Choices: no yes ←	to disable lldp on the interface.
	location dictionary					LLDP-MED location data.
		civic_based dictionary				Civic-based location data.
			ca_info list			LLDP-MED address info
				ca_type integer / required		LLDP-MED Civic Address type.
				ca_value string / required		LLDP-MED Civic Address value.
			country_code string / required			Country Code
		coordinate_based dictionary				Coordinate-based location.
			altitude integer			Altitude in meters.
			datum string		Choices: WGS84 NAD83 MLLW	Coordinate datum type.
			latitude string / required			Latitude.
			longitude string / required			Longitude.
		elin string				Emergency Call Service ELIN number (between 10-25 numbers).
	name string / required					Name of the lldp interface.
state string					Choices: merged ← replaced overridden deleted	The state of the configuration after module completion.

Notes ¶

Note

Tested against VyOS 1.1.8 (helium).
This module works with connection network_cli. See the VyOS OS Platform Options.

Examples ¶

# Using merged
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep lldp
#
- name: Merge provided configuration with device configuration
  vyos_lldp_interfaces:
    config:
      - name: 'eth1'
        location:
          civic_based:
            country_code: 'US'
            ca_info:
              - ca_type: 0
                ca_value: 'ENGLISH'

      - name: 'eth2'
        location:
          coordinate_based:
           altitude: 2200
           datum: 'WGS84'
           longitude: '222.267255W'
           latitude: '33.524449N'
    state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# before": []
#
#    "commands": [
#        "set service lldp interface eth1 location civic-based country-code 'US'",
#        "set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'",
#        "set service lldp interface eth1",
#        "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
#        "set service lldp interface eth2 location coordinate-based altitude '2200'",
#        "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
#        "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
#        "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
#        "set service lldp interface eth2 location coordinate-based altitude '2200'",
#        "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
#        "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
#        "set service lldp interface eth2"
#
# "after": [
#        {
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth1"
#        }
#    ],
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'


# Using replaced
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
#
- name: Replace device configurations of listed LLDP interfaces with provided configurations
  vyos_lldp_interfaces:
    config:
      - name: 'eth2'
        location:
          civic_based:
            country_code: 'US'
            ca_info:
              - ca_type: 0
                ca_value: 'ENGLISH'

      - name: 'eth1'
        location:
          coordinate_based:
           altitude: 2200
           datum: 'WGS84'
           longitude: '222.267255W'
           latitude: '33.524449N'
    state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth1"
#        }
#    ]
#
#    "commands": [
#        "delete service lldp interface eth2 location",
#        "set service lldp interface eth2 'disable'",
#        "set service lldp interface eth2 location civic-based country-code 'US'",
#        "set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'",
#        "delete service lldp interface eth1 location",
#        "set service lldp interface eth1 'disable'",
#        "set service lldp interface eth1 location coordinate-based latitude '33.524449N'",
#        "set service lldp interface eth1 location coordinate-based altitude '2200'",
#        "set service lldp interface eth1 location coordinate-based datum 'WGS84'",
#        "set service lldp interface eth1 location coordinate-based longitude '222.267255W'"
#    ]
#
#    "after": [
#        {
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth1"
#        }
#    ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 'disable'
# set service lldp interface eth1 location coordinate-based altitude '2200'
# set service lldp interface eth1 location coordinate-based datum 'WGS84'
# set service lldp interface eth1 location coordinate-based latitude '33.524449N'
# set service lldp interface eth1 location coordinate-based longitude '222.267255W'
# set service lldp interface eth2 'disable'
# set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth2 location civic-based country-code 'US'


# Using overridden
#
# Before state
# --------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 'disable'
# set service lldp interface eth1 location coordinate-based altitude '2200'
# set service lldp interface eth1 location coordinate-based datum 'WGS84'
# set service lldp interface eth1 location coordinate-based latitude '33.524449N'
# set service lldp interface eth1 location coordinate-based longitude '222.267255W'
# set service lldp interface eth2 'disable'
# set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth2 location civic-based country-code 'US'
#
- name: Overrides all device configuration with provided configuration
  vyos_lag_interfaces:
    config:
     - name: 'eth2'
       location:
         elin: 0000000911

    state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before": [
#        {
#            "enable": false,
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "enable": false,
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth1"
#        }
#    ]
#
#    "commands": [
#        "delete service lldp interface eth2 location",
#        "delete service lldp interface eth2 disable",
#        "set service lldp interface eth2 location elin 0000000911"
#
#
#    "after": [
#        {
#            "location": {
#                "elin": 0000000911
#            },
#            "name": "eth2"
#        }
#    ]
#
#
# After state
# ------------
#
# vyos@vyos# run show configuration commands | grep lldp
# set service lldp interface eth2 location elin '0000000911'


# Using deleted
#
# Before state
# -------------
#
# vyos@vyos# run show configuration commands | grep lldp
# set service lldp interface eth2 location elin '0000000911'
#
- name: Delete lldp  interface attributes of given interfaces.
  vyos_lag_interfaces:
    config:
     - name: 'eth2'
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
    "before": [
        {
            "location": {
                "elin": 0000000911
            },
            "name": "eth2"
        }
    ]
# "commands": [
#    "commands": [
#        "delete service lldp interface eth2"
#    ]
#
# "after": []
# After state
# ------------
# vyos@vyos# run show configuration commands | grep lldp
# set service 'lldp'

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list	always	The set of commands pushed to the remote device. Sample: ["set service lldp interface eth2 'disable'", 'delete service lldp interface eth1 location']

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Network Team. [network]

Red Hat Support¶

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors¶

Rohit Thakur (@rohitthakur2590)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

vyos_lldp_interfaces – Manages attributes of lldp interfaces on VyOS devices¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶