vyos_static_route – Manage static IP routes on Vyatta VyOS network devices¶
New in version 2.4.
Synopsis¶
This module provides declarative management of static IP routes on Vyatta VyOS network devices.
Parameters¶
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
admin_distance
-
|
Admin distance of the static route.
|
||
aggregate
-
|
List of static route definitions
|
||
mask
-
|
Network prefix mask of the static route.
|
||
next_hop
-
|
Next hop IP of the static route.
|
||
prefix
-
|
Network prefix of the static route.
mask param should be ignored if prefix is provided with mask value prefix/mask . |
||
provider
dictionary
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli .For more information please see the Network Guide.
A dict object containing connection details.
|
||
host
string
/ required
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
|
||
password
string
|
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_PASSWORD will be used instead. |
||
port
integer
|
Default: 22
|
Specifies the port to use when building the connection to the remote device.
|
|
ssh_keyfile
path
|
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_SSH_KEYFILE will be used instead. |
||
timeout
integer
|
Default: 10
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
|
|
username
string
|
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_USERNAME will be used instead. |
||
state
-
|
|
State of the static route configuration.
|
Notes¶
Note
Tested against VyOS 1.1.8 (helium).
This module works with connection
network_cli
. See the VyOS OS Platform Options.For more information on using Ansible to manage network devices see the Ansible Network Guide
Examples¶
- name: configure static route
vyos_static_route:
prefix: 192.168.2.0
mask: 24
next_hop: 10.0.0.1
- name: configure static route prefix/mask
vyos_static_route:
prefix: 192.168.2.0/16
next_hop: 10.0.0.1
- name: remove configuration
vyos_static_route:
prefix: 192.168.2.0
mask: 16
next_hop: 10.0.0.1
state: absent
- name: configure aggregates of static routes
vyos_static_route:
aggregate:
- { prefix: 192.168.2.0, mask: 24, next_hop: 10.0.0.1 }
- { prefix: 192.168.3.0, mask: 16, next_hop: 10.0.2.1 }
- { prefix: 192.168.3.0/16, next_hop: 10.0.2.1 }
- name: Remove static route collections
vyos_static_route:
aggregate:
- { prefix: 172.24.1.0/24, next_hop: 192.168.42.64 }
- { prefix: 172.24.3.0/24, next_hop: 192.168.42.64 }
state: absent
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
commands
list
|
always |
The list of configuration mode commands to send to the device
Sample:
['set protocols static route 192.168.2.0/16 next-hop 10.0.0.1']
|
Status¶
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Network Team. [network]
Red Hat Support¶
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors¶
Trishna Guha (@trishnaguha)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.