Update Zabbix actions¶

New in version 2.8.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

This module allows you to create, modify and delete Zabbix actions.

Requirements ¶

The below requirements are needed on the host that executes this module.

zabbix-api >= 0.5.4

Parameters ¶

Parameter		Choices/Defaults	Comments
acknowledge_default_message -			Update operation (known as "Acknowledge operation" before Zabbix 4.0) message text. Works only with >= Zabbix 3.4
acknowledge_default_subject -			Update operation (known as "Acknowledge operation" before Zabbix 4.0) message subject. Works only with >= Zabbix 3.4
acknowledge_operations list			List of acknowledge operations. `Suboptions` are the same as for operations. Works only with >= Zabbix 3.4
conditions list			List of dictionaries of conditions to evaluate. For more information about suboptions of this option please check out Zabbix API documentation https://www.zabbix.com/documentation/3.4/manual/api/reference/action/object#action_filter_condition
	formulaid -		Arbitrary unique ID that is used to reference the condition from a custom expression. Can only contain upper-case letters. Required for custom expression filters.
	operator -	Choices: = <> like not like in >= <= not in matches does not match Yes No	Condition operator. When type is set to `time_period`, the choices are `in`, `not in`. `matches`, `does not match`, `Yes` and `No` condition operators work only with >= Zabbix 4.0
	type -	Choices: host_group host trigger trigger_name trigger_severity time_period host_template application maintenance_status event_tag event_tag_value host_IP discovered_service_type discovered_service_port discovery_status uptime_or_downtime_duration received_value discovery_rule discovery_check proxy discovery_object proxy host_name host_metadata host_group host host_template application event_type	Type (label) of the condition.
	value -		Value to compare with. When type is set to `discovery_status`, the choices are `up`, `down`, `discovered`, `lost`. When type is set to `discovery_object`, the choices are `host`, `service`. When type is set to `event_type`, the choices are `item in not supported state`, `item in normal state`, `LLD rule in not supported state`, `LLD rule in normal state`, `trigger in unknown state`, `trigger in normal state`. When type is set to `trigger_severity`, the choices are (case-insensitive) `not classified`, `information`, `warning`, `average`, `high`, `disaster` irrespective of user-visible names being changed in Zabbix. Defaults to `not classified` if omitted. Besides the above options, this is usually either the name of the object or a string to compare with.
default_message -			Problem message default text.
default_subject -			Problem message default subject.
esc_period -			Default operation step duration. Must be greater than 60 seconds. Accepts seconds, time unit with suffix and user macro. Required when `state=present`.
eval_type -		Choices: andor and or custom_expression	Filter condition evaluation method. Defaults to `andor` if conditions are less then 2 or if formula is not specified. Defaults to `custom_expression` when formula is specified.
event_source -		Choices: trigger discovery auto_registration internal	Type of events that the action will handle. Required when `state=present`.
formula -			User-defined expression to be used for evaluating conditions of filters with a custom expression. The expression must contain IDs that reference specific filter conditions by its formulaid. The IDs used in the expression must exactly match the ones defined in the filter conditions. No condition can remain unused or omitted. Required for custom expression filters. Use sequential IDs that start at "A". If non-sequential IDs are used, Zabbix re-indexes them. This makes each module run notice the difference in IDs and update the action.
http_login_password string			Basic Auth password
http_login_user string / required			Basic Auth login
login_password string / required			Zabbix user password.
login_user string / required			Zabbix user name.
name - / required			Name of the action
operations list			List of action operations
	command -		Command to run. Required when type=remote_command and command_type!=global_script.
	command_type -	Choices: custom_script ipmi ssh telnet global_script	Type of operation command. Required when type=remote_command.
	esc_period -	Default: "0s"	Duration of an escalation step in seconds. Must be greater than 60 seconds. Accepts seconds, time unit with suffix and user macro. If set to 0 or 0s, the default action escalation period will be used.
	esc_step_from -	Default: 1	Step to start escalation from.
	esc_step_to -	Default: 1	Step to end escalation at.
	execute_on -	Choices: agent server proxy	Target on which the custom script operation command will be executed. Required when type=remote_command and command_type=custom_script.
	host_groups list		List of host groups host should be added to. Required when type=add_to_host_group or type=remove_from_host_group.
	inventory -		Host inventory mode. Required when type=set_host_inventory_mode.
	media_type -	Default: "all"	Media type that will be used to send the message. Set to `all` for all media types
	message -		Operation message text. Will check the 'default message' and use the text from default_message if this and default_subject are not specified
	operation_condition string	Choices: acknowledged not_acknowledged	The action operation condition object defines a condition that must be met to perform the current operation.
	password -		Password used for authentication. Required when type=remote_command and command_type in [ssh, telnet].
	port -		Port number used for authentication. Required when type=remote_command and command_type in [ssh, telnet].
	run_on_groups -		Host groups to run remote commands on. Required when type=remote_command if run_on_hosts is not set.
	run_on_hosts -		Hosts to run remote commands on. Required when type=remote_command if run_on_groups is not set. If set to 0 the command will be run on the current host.
	script_name -		The name of script used for global script commands. Required when type=remote_command and command_type=global_script.
	send_to_groups list		User groups to send messages to.
	send_to_users list		Users (usernames or aliases) to send messages to.
	ssh_auth_type -	Choices: password public_key	Authentication method used for SSH commands. Required when type=remote_command and command_type=ssh.
	ssh_privatekey_file -		Name of the private key file used for SSH commands with public key authentication. Required when type=remote_command and command_type=ssh.
	ssh_publickey_file -		Name of the public key file used for SSH commands with public key authentication. Required when type=remote_command and command_type=ssh.
	subject -		Operation message subject. Will check the 'default message' and use the text from default_subject if this and default_subject are not specified
	templates list		List of templates host should be linked to. Required when type=link_to_template or type=unlink_from_template.
	type -	Choices: send_message remote_command add_host remove_host add_to_host_group remove_from_host_group link_to_template unlink_from_template enable_host disable_host set_host_inventory_mode	Type of operation.
	username -		User name used for authentication. Required when type=remote_command and command_type in [ssh, telnet].
pause_in_maintenance boolean		Choices: no yes ←	Whether to pause escalation during maintenance periods or not. Can be used when event_source=trigger.
recovery_default_message -			Recovery message text. Works only with >= Zabbix 3.2
recovery_default_subject -			Recovery message subject. Works only with >= Zabbix 3.2
recovery_operations list			List of recovery operations. `Suboptions` are the same as for operations. Works only with >= Zabbix 3.2
server_url string / required			URL of Zabbix server, with protocol (http or https). `url` is an alias for `server_url`. aliases: url
state -		Choices: present ← absent	State of the action. On `present`, it will create an action if it does not exist or update the action if the associated data is different. On `absent`, it will remove the action if it exists.
status -		Choices: enabled ← disabled	Status of the action.
timeout integer		Default: 10	The timeout of API request (seconds).
validate_certs boolean added in 2.5		Choices: no yes ←	If set to False, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates.

Notes ¶

Note

Only Zabbix >= 3.0 is supported.
If you use login_password=zabbix, the word “zabbix” is replaced by “****” in all module output, because login_password uses no_log. See this FAQ for more information.

Examples ¶

# Trigger action with only one condition
- name: Deploy trigger action
  zabbix_action:
    server_url: "http://zabbix.example.com/zabbix/"
    login_user: Admin
    login_password: secret
    name: "Send alerts to Admin"
    event_source: 'trigger'
    state: present
    status: enabled
    esc_period: 60
    conditions:
      - type: 'trigger_severity'
        operator: '>='
        value: 'Information'
    operations:
      - type: send_message
        subject: "Something bad is happening"
        message: "Come on, guys do something"
        media_type: 'Email'
        send_to_users:
          - 'Admin'

# Trigger action with multiple conditions and operations
- name: Deploy trigger action
  zabbix_action:
    server_url: "http://zabbix.example.com/zabbix/"
    login_user: Admin
    login_password: secret
    name: "Send alerts to Admin"
    event_source: 'trigger'
    state: present
    status: enabled
    esc_period: 60
    conditions:
      - type: 'trigger_name'
        operator: 'like'
        value: 'Zabbix agent is unreachable'
        formulaid: A
      - type: 'trigger_severity'
        operator: '>='
        value: 'disaster'
        formulaid: B
    formula: A or B
    operations:
      - type: send_message
        media_type: 'Email'
        send_to_users:
          - 'Admin'
      - type: remote_command
        command: 'systemctl restart zabbix-agent'
        command_type: custom_script
        execute_on: server
        run_on_hosts:
          - 0

# Trigger action with recovery and acknowledge operations
- name: Deploy trigger action
  zabbix_action:
    server_url: "http://zabbix.example.com/zabbix/"
    login_user: Admin
    login_password: secret
    name: "Send alerts to Admin"
    event_source: 'trigger'
    state: present
    status: enabled
    esc_period: 60
    conditions:
      - type: 'trigger_severity'
        operator: '>='
        value: 'Information'
    operations:
      - type: send_message
        subject: "Something bad is happening"
        message: "Come on, guys do something"
        media_type: 'Email'
        send_to_users:
          - 'Admin'
    recovery_operations:
      - type: send_message
        subject: "Host is down"
        message: "Come on, guys do something"
        media_type: 'Email'
        send_to_users:
          - 'Admin'
    acknowledge_operations:
      - type: send_message
        media_type: 'Email'
        send_to_users:
          - 'Admin'

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
msg string	success	The result of the operation Sample: Action Deleted: Register webservers, ID: 0001

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors¶

Ruben Tsirunyan (@rubentsirunyan)
Ruben Harutyunov (@K-DOT)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

zabbix_action – Create/Delete/Update Zabbix actions¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶