cisco.aci.aci_domain – Manage physical, virtual, bridged, routed or FC domain profiles (phys:DomP, vmm:DomP, l2ext:DomP, l3ext:DomP, fc:DomP)¶

Note

This plugin is part of the cisco.aci collection (version 2.0.0).

To install it use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_domain.

Synopsis
Parameters
See Also
Examples
Return Values

Synopsis ¶

Manage physical, virtual, bridged, routed or FC domain profiles on Cisco ACI fabrics.

Parameters ¶

Parameter	Choices/Defaults	Comments
annotation string		User-defined string for annotating an object. If the value is not specified in the task, the value of environment variable `ACI_ANNOTATION` will be used instead.
certificate_name string		The X.509 certificate name attached to the APIC AAA user used for signature-based authentication. If a `private_key` filename was provided, this defaults to the `private_key` basename, without extension. If PEM-formatted content was provided for `private_key`, this defaults to the `username` value. If the value is not specified in the task, the value of environment variable `ACI_CERTIFICATE_NAME` will be used instead. aliases: cert_name
domain string		Name of the physical, virtual, bridged routed or FC domain profile. aliases: domain_name, domain_profile, name
domain_type string / required	Choices: fc l2dom l3dom phys vmm	The type of domain profile. `fc`: The FC domain profile is a policy pertaining to single FC Management domain `l2dom`: The external bridged domain profile is a policy for managing L2 bridged infrastructure bridged outside the fabric. `l3dom`: The external routed domain profile is a policy for managing L3 routed infrastructure outside the fabric. `phys`: The physical domain profile stores the physical resources and encap resources that should be used for EPGs associated with this domain. `vmm`: The VMM domain profile is a policy for grouping VM controllers with similar networking policy requirements. aliases: type
dscp string	Choices: AF11 AF12 AF13 AF21 AF22 AF23 AF31 AF32 AF33 AF41 AF42 AF43 CS0 CS1 CS2 CS3 CS4 CS5 CS6 CS7 EF VA unspecified	The target Differentiated Service (DSCP) value. The APIC defaults to `unspecified` when unset during creation. aliases: target
encap_mode string	Choices: unknown vlan vxlan	The layer 2 encapsulation protocol to use with the virtual switch.
host string / required		IP Address or hostname of APIC resolvable by Ansible control host. If the value is not specified in the task, the value of environment variable `ACI_HOST` will be used instead. aliases: hostname
multicast_address string		The multicast IP address to use for the virtual switch.
name_alias string		The alias for the current object. This relates to the nameAlias field in ACI.
output_level string	Choices: debug info normal ←	Influence the output of this ACI module. `normal` means the standard output, incl. `current` dict `info` adds informational output, incl. `previous`, `proposed` and `sent` dicts `debug` adds debugging output, incl. `filter_string`, `method`, `response`, `status` and `url` information If the value is not specified in the task, the value of environment variable `ACI_OUTPUT_LEVEL` will be used instead.
output_path string		Path to a file that will be used to dump the ACI JSON configuration objects generated by the module. If the value is not specified in the task, the value of environment variable `ACI_OUTPUT_PATH` will be used instead.
owner_key string		User-defined string for the ownerKey attribute of an ACI object. This attribute represents a key for enabling clients to own their data for entity correlation. If the value is not specified in the task, the value of environment variable `ACI_OWNER_KEY` will be used instead.
owner_tag string		User-defined string for the ownerTag attribute of an ACI object. This attribute represents a tag for enabling clients to add their own data. For example, to indicate who created this object. If the value is not specified in the task, the value of environment variable `ACI_OWNER_TAG` will be used instead.
password string		The password to use for authentication. This option is mutual exclusive with `private_key`. If `private_key` is provided too, it will be used instead. If the value is not specified in the task, the value of environment variables `ACI_PASSWORD` or `ANSIBLE_NET_PASSWORD` will be used instead.
port integer		Port number to be used for REST connection. The default value depends on parameter `use_ssl`. If the value is not specified in the task, the value of environment variable `ACI_PORT` will be used instead.
private_key string		Either a PEM-formatted private key file or the private key content used for signature-based authentication. This value also influences the default `certificate_name` that is used. This option is mutual exclusive with `password`. If `password` is provided too, it will be ignored. If the value is not specified in the task, the value of environment variable `ACI_PRIVATE_KEY` will be used instead. aliases: cert_key
state string	Choices: absent present ← query	Use `present` or `absent` for adding or removing. Use `query` for listing an object or multiple objects.
timeout integer	Default: 30	The socket level timeout in seconds. If the value is not specified in the task, the value of environment variable `ACI_TIMEOUT` will be used instead.
use_proxy boolean	Choices: no yes ←	If `no`, it will not use a proxy, even if one is defined in an environment variable on the target hosts. If the value is not specified in the task, the value of environment variable `ACI_USE_PROXY` will be used instead.
use_ssl boolean	Choices: no yes ←	If `no`, an HTTP connection will be used instead of the default HTTPS connection. If the value is not specified in the task, the value of environment variable `ACI_USE_SSL` will be used instead.
username string	Default: "admin"	The username to use for authentication. If the value is not specified in the task, the value of environment variables `ACI_USERNAME` or `ANSIBLE_NET_USERNAME` will be used instead. aliases: user
validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates will not be validated. This should only set to `no` when used on personally controlled sites using self-signed certificates. If the value is not specified in the task, the value of environment variable `ACI_VALIDATE_CERTS` will be used instead.
vm_provider string	Choices: cloudfoundry kubernetes microsoft openshift openstack redhat vmware	The VM platform for VMM Domains. Support for Kubernetes was added in ACI v3.0. Support for CloudFoundry, OpenShift and Red Hat was added in ACI v3.1.
vswitch string	Choices: avs default dvs unknown	The virtual switch to use for vmm domains. The APIC defaults to `default` when unset during creation.

Examples ¶

- name: Add a new physical domain
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain: phys_dom
    domain_type: phys
    state: present

- name: Remove a physical domain
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain: phys_dom
    domain_type: phys
    state: absent

- name: Add a new VMM domain
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain: hyperv_dom
    domain_type: vmm
    vm_provider: microsoft
    state: present
  delegate_to: localhost

- name: Remove a VMM domain
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain: hyperv_dom
    domain_type: vmm
    vm_provider: microsoft
    state: absent
  delegate_to: localhost

- name: Query a specific physical domain
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain: phys_dom
    domain_type: phys
    state: query
  delegate_to: localhost
  register: query_result

- name: Query all domains
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain_type: phys
    state: query
  delegate_to: localhost
  register: query_result

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
current list / elements=string	success	The existing configuration from the APIC after the module has finished Sample: [{'fvTenant': {'attributes': {'descr': 'Production environment', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
error dictionary	failure	The error information as returned from the APIC Sample: {'code': '122', 'text': 'unknown managed object class foo'}
filter_string string	failure or debug	The filter string used for the request Sample: ?rsp-prop-include=config-only
method string	failure or debug	The HTTP method used for the request to the APIC Sample: POST
previous list / elements=string	info	The original configuration from the APIC before the module has started Sample: [{'fvTenant': {'attributes': {'descr': 'Production', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
proposed dictionary	info	The assembled configuration from the user-provided parameters Sample: {'fvTenant': {'attributes': {'descr': 'Production environment', 'name': 'production'}}}
raw string	parse error	The raw output returned by the APIC REST API (xml or json) Sample: <?xml version="1.0" encoding="UTF-8"?><imdata totalCount="1"><error code="122" text="unknown managed object class foo"/></imdata>
response string	failure or debug	The HTTP response from the APIC Sample: OK (30 bytes)
sent list / elements=string	info	The actual/minimal configuration pushed to the APIC Sample: {'fvTenant': {'attributes': {'descr': 'Production environment'}}}
status integer	failure or debug	The HTTP status from the APIC Sample: 200
url string	failure or debug	The HTTP url used for the request to the APIC Sample: https://10.11.12.13/api/mo/uni/tn-production.json

Authors¶

Dag Wieers (@dagwieers)

cisco.aci.aci_domain – Manage physical, virtual, bridged, routed or FC domain profiles (phys:DomP, vmm:DomP, l2ext:DomP, l3ext:DomP, fc:DomP)¶

Synopsis¶

Parameters¶

See Also¶

Examples¶

Return Values¶