cisco.mso.mso_schema_site_anp_epg_domain – Manage site-local EPG domains in schema template

Note

This plugin is part of the cisco.mso collection (version 1.1.0).

To install it use: ansible-galaxy collection install cisco.mso.

To use it in a playbook, specify: cisco.mso.mso_schema_site_anp_epg_domain.

Synopsis

  • Manage site-local EPG domains in schema template on Cisco ACI Multi-Site.

Requirements

The below requirements are needed on the host that executes this module.

  • Multi Site Orchestrator v2.1 or newer

Parameters

Parameter Choices/Defaults Comments
allow_micro_segmentation
boolean
    Choices:
  • no
  • yes
Specifies microsegmentation is enabled or not. This attribute can only be used with vmmDomain domain association.
anp
string / required
The name of the ANP.
deployment_immediacy
string
    Choices:
  • immediate
  • lazy
The deployment immediacy of the domain.
immediate means Deploy immediate.
lazy means deploy on demand.
domain_association_type
string
    Choices:
  • vmmDomain
  • l3ExtDomain
  • l2ExtDomain
  • physicalDomain
  • fibreChannelDomain
The type of domain to associate.
domain_profile
string
The domain profile name.
enhanced_lagpolicy_dn
string
Distinguished name of EPG lagpolicy. This attribute can only be used with vmmDomain domain association.
enhanced_lagpolicy_name
string
EPG enhanced lagpolicy name. This attribute can only be used with vmmDomain domain association.
epg
string / required
The name of the EPG.
host
string / required
IP Address or hostname of the ACI Multi Site Orchestrator host.
If the value is not specified in the task, the value of environment variable MSO_HOST will be used instead.

aliases: hostname
login_domain
string
The login domain name to use for authentication.
The default value is Local.
If the value is not specified in the task, the value of environment variable MSO_LOGIN_DOMAIN will be used instead.
micro_seg_vlan
integer
Virtual LAN for microsegmentation. This attribute can only be used with vmmDomain domain association.
micro_seg_vlan_type
string
Virtual LAN type for microsegmentation. This attribute can only be used with vmmDomain domain association.
vlan is currently the only accepted value.
output_level
string
    Choices:
  • debug
  • info
  • normal ←
Influence the output of this ACI module.
normal means the standard output, incl. current dict
info adds informational output, incl. previous, proposed and sent dicts
debug adds debugging output, incl. filter_string, method, response, status and url information
If the value is not specified in the task, the value of environment variable MSO_OUTPUT_LEVEL will be used instead.
password
string / required
The password to use for authentication.
If the value is not specified in the task, the value of environment variables MSO_PASSWORD or ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Port number to be used for the REST connection.
The default value depends on parameter `use_ssl`.
If the value is not specified in the task, the value of environment variable MSO_PORT will be used instead.
port_encap_vlan
integer
Virtual LAN type for port encap. This attribute can only be used with vmmDomain domain association.
port_encap_vlan_type
string
Virtual LAN type for port encap. This attribute can only be used with vmmDomain domain association.
vlan is currently the only accepted value.
resolution_immediacy
string
    Choices:
  • immediate
  • lazy
  • pre-provision
Determines when the policies should be resolved and available.
Defaults to lazy when unset during creation.
schema
string / required
The name of the schema.
site
string / required
The name of the site.
state
string
    Choices:
  • absent
  • present ←
  • query
Use present or absent for adding or removing.
Use query for listing an object or multiple objects.
switch_type
string
Which switch type to use with this domain association. This attribute can only be used with vmmDomain domain association.
switching_mode
string
Which switching mode to use with this domain association. This attribute can only be used with vmmDomain domain association.
template
string / required
The name of the template.
timeout
integer
Default:
30
The socket level timeout in seconds.
If the value is not specified in the task, the value of environment variable MSO_TIMEOUT will be used instead.
use_proxy
boolean
    Choices:
  • no
  • yes ←
If no, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
If the value is not specified in the task, the value of environment variable MSO_USE_PROXY will be used instead.
use_ssl
boolean
    Choices:
  • no
  • yes ←
If no, an HTTP connection will be used instead of the default HTTPS connection.
If the value is not specified in the task, the value of environment variable MSO_USE_SSL will be used instead.
username
string
Default:
"admin"
The username to use for authentication.
If the value is not specified in the task, the value of environment variables MSO_USERNAME or ANSIBLE_NET_USERNAME will be used instead.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates will not be validated.
This should only set to no when used on personally controlled sites using self-signed certificates.
If the value is not specified in the task, the value of environment variable MSO_VALIDATE_CERTS will be used instead.
vlan_encap_mode
string
    Choices:
  • static
  • dynamic
Which VLAN enacap mode to use. This attribute can only be used with vmmDomain domain association.

Notes

Note

  • The ACI MultiSite PATCH API has a deficiency requiring some objects to be referenced by index. This can cause silent corruption on concurrent access when changing/removing on object as the wrong object may be referenced. This module is affected by this deficiency.

  • Please read the Cisco ACI Guide for more detailed information on how to manage your ACI infrastructure using Ansible.

  • This module was written to support ACI Multi Site Orchestrator v2.1 or newer. Some or all functionality may not work on earlier versions.

See Also

See also

cisco.mso.mso_schema_site_anp_epg

The official documentation on the cisco.mso.mso_schema_site_anp_epg module.

cisco.mso.mso_schema_template_anp_epg

The official documentation on the cisco.mso.mso_schema_template_anp_epg module.

Examples

- name: Add a new domain to a site EPG
  cisco.mso.mso_schema_site_anp_epg_domain:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema1
    site: Site1
    template: Template1
    anp: ANP1
    epg: EPG1
    domain_association_type: vmmDomain
    domain_profile: 'VMware-VMM'
    deployment_immediacy: lazy
    resolution_immediacy: pre-provision
    state: present
  delegate_to: localhost

- name: Remove a domain from a site EPG
  cisco.mso.mso_schema_site_anp_epg_domain:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema1
    site: Site1
    template: Template1
    anp: ANP1
    epg: EPG1
    domain_association_type: vmmDomain
    domain_profile: 'VMware-VMM'
    deployment_immediacy: lazy
    resolution_immediacy: pre-provision
    state: absent
  delegate_to: localhost

- name: Query a domain associated with a specific site EPG
  cisco.mso.mso_schema_site_anp_epg_domain:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema1
    site: Site1
    template: Template1
    anp: ANP1
    epg: EPG1
    domain_association_type: vmmDomain
    domain_profile: 'VMware-VMM'
    state: query
  delegate_to: localhost
  register: query_result

- name: Query all domains associated with a site EPG
  cisco.mso.mso_schema_site_anp_epg_domain:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema1
    site: Site1
    template: Template1
    anp: ANP1
    epg: EPG1
    state: query
  delegate_to: localhost
  register: query_result

Authors

  • Nirav Katarmal (@nkatarmal-crest)