cisco.nxos.nxos_banner – Manage multiline banners on Cisco NXOS devices¶
Note
This plugin is part of the cisco.nxos collection (version 1.4.0).
To install it use: ansible-galaxy collection install cisco.nxos
.
To use it in a playbook, specify: cisco.nxos.nxos_banner
.
New in version 1.0.0: of cisco.nxos
Synopsis¶
This will configure both exec and motd banners on remote devices running Cisco NXOS. It allows playbooks to add or remove banner text from the active running configuration.
Note
This module has a corresponding action plugin.
Parameters¶
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
banner
string
/ required
|
|
Specifies which banner that should be configured on the remote device.
|
|
provider
dictionary
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli .Starting with Ansible 2.6 we recommend using
connection: httpapi for NX-API.This option will be removed in a release after 2022-06-01.
For more information please see the NXOS Platform Options guide.
A dict object containing connection details.
|
||
auth_pass
string
|
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTH_PASS will be used instead. |
||
authorize
boolean
|
|
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTHORIZE will be used instead. |
|
host
string
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
|
||
password
string
|
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_PASSWORD will be used instead. |
||
port
integer
|
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
|
||
ssh_keyfile
string
|
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_SSH_KEYFILE will be used instead. |
||
timeout
integer
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
|
||
transport
string
|
|
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
|
|
use_proxy
boolean
|
|
If
no , the environment variables http_proxy and https_proxy will be ignored. |
|
use_ssl
boolean
|
|
Configures the transport to use SSL if set to
yes only when the transport=nxapi , otherwise this value is ignored. |
|
username
string
|
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_USERNAME will be used instead. |
||
validate_certs
boolean
|
|
If
no , SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored. |
|
state
string
|
|
Specifies whether or not the configuration is present in the current devices active running configuration.
|
|
text
string
|
The banner text that should be present in the remote device running configuration. This argument accepts a multiline string, with no empty lines. Requires state=present.
|
Notes¶
Note
Since responses from the device are always read with surrounding whitespaces stripped, tasks that configure banners with preceeding or trailing whitespaces will not be idempotent.
For information on using CLI and NX-API see the NXOS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.
Examples¶
- name: configure the exec banner
cisco.nxos.nxos_banner:
banner: exec
text: |
this is my exec banner
that contains a multiline
string
state: present
- name: remove the motd banner
cisco.nxos.nxos_banner:
banner: motd
state: absent
- name: Configure banner from file
cisco.nxos.nxos_banner:
banner: motd
text: "{{ lookup('file', './config_partial/raw_banner.cfg') }}"
state: present
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
Authors¶
Trishna Guha (@trishnaguha)