cisco.nxos.nxos_install_os – Set boot options like boot, kickstart image and issu.¶
Note
This plugin is part of the cisco.nxos collection (version 1.4.0).
To install it use: ansible-galaxy collection install cisco.nxos
.
To use it in a playbook, specify: cisco.nxos.nxos_install_os
.
New in version 1.0.0: of cisco.nxos
Synopsis¶
Install an operating system by setting the boot options like boot image and kickstart image and optionally select to install using ISSU (In Server Software Upgrade).
Note
This module has a corresponding action plugin.
Parameters¶
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
issu
string
|
|
Upgrade using In Service Software Upgrade (ISSU). (Supported on N5k, N7k, N9k platforms)
Selecting 'required' or 'yes' means that upgrades will only proceed if the switch is capable of ISSU.
Selecting 'desired' means that upgrades will use ISSU if possible but will fall back to disruptive upgrade if needed.
Selecting 'no' means do not use ISSU. Forced disruptive.
|
|
kickstart_image_file
string
|
Name of the kickstart image file on flash. (Not required on all Nexus platforms)
|
||
provider
dictionary
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli .Starting with Ansible 2.6 we recommend using
connection: httpapi for NX-API.This option will be removed in a release after 2022-06-01.
For more information please see the NXOS Platform Options guide.
A dict object containing connection details.
|
||
auth_pass
string
|
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTH_PASS will be used instead. |
||
authorize
boolean
|
|
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTHORIZE will be used instead. |
|
host
string
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
|
||
password
string
|
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_PASSWORD will be used instead. |
||
port
integer
|
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
|
||
ssh_keyfile
string
|
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_SSH_KEYFILE will be used instead. |
||
timeout
integer
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
|
||
transport
string
|
|
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
|
|
use_proxy
boolean
|
|
If
no , the environment variables http_proxy and https_proxy will be ignored. |
|
use_ssl
boolean
|
|
Configures the transport to use SSL if set to
yes only when the transport=nxapi , otherwise this value is ignored. |
|
username
string
|
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_USERNAME will be used instead. |
||
validate_certs
boolean
|
|
If
no , SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored. |
|
system_image_file
string
/ required
|
Name of the system (or combined) image file on flash.
|
Notes¶
Note
Tested against the following platforms and images - N9k 7.0(3)I4(6), 7.0(3)I5(3), 7.0(3)I6(1), 7.0(3)I7(1), 7.0(3)F2(2), 7.0(3)F3(2) - N3k 6.0(2)A8(6), 6.0(2)A8(8), 7.0(3)I6(1), 7.0(3)I7(1) - N7k 7.3(0)D1(1), 8.0(1), 8.1(1), 8.2(1)
This module requires both the ANSIBLE_PERSISTENT_CONNECT_TIMEOUT and ANSIBLE_PERSISTENT_COMMAND_TIMEOUT timers to be set to 600 seconds or higher. The module will exit if the timers are not set properly.
When using connection local, ANSIBLE_PERSISTENT_CONNECT_TIMEOUT and ANSIBLE_PERSISTENT_COMMAND_TIMEOUT can only be set using ENV variables or the ansible.cfg file.
Do not include full file paths, just the name of the file(s) stored on the top level flash directory.
This module attempts to install the software immediately, which may trigger a reboot.
In check mode, the module will indicate if an upgrade is needed and whether or not the upgrade is disruptive or non-disruptive(ISSU).
For information on using CLI and NX-API see the NXOS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.
Examples¶
- name: Install OS on N9k
check_mode: no
cisco.nxos.nxos_install_os:
system_image_file: nxos.7.0.3.I6.1.bin
issu: desired
- name: Wait for device to come back up with new image
wait_for:
port: 22
state: started
timeout: 500
delay: 60
host: '{{ inventory_hostname }}'
- name: Check installed OS for newly installed version
nxos_command:
commands: [show version | json]
provider: '{{ connection }}'
register: output
- assert:
that:
- output['stdout'][0]['kickstart_ver_str'] == '7.0(3)I6(1)'
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
Authors¶
Jason Edelman (@jedelman8)
Gabriele Gerbibo (@GGabriele)