community.network.ce_vrrp – Manages VRRP interfaces on HUAWEI CloudEngine devices.

Note

This plugin is part of the community.network collection (version 2.1.1).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_vrrp.

Synopsis

• Manages VRRP interface attributes on HUAWEI CloudEngine devices.

Parameters

Parameter	Choices/Defaults	Comments
admin_flowdown boolean	Choices: no yes Default: "false"	Disable the flowdown function for service VRRP.
admin_ignore_if_down boolean	Choices: no yes Default: "false"	mVRRP ignores an interface Down event.
admin_interface string		Tracked mVRRP interface name. The value is a string of 1 to 63 characters.
admin_vrid string		Tracked mVRRP ID. The value is an integer ranging from 1 to 255.
advertise_interval string		Configured interval between sending advertisements, in milliseconds. Only the master router sends VRRP advertisements. The default value is 1000 milliseconds.
auth_key string		This object is set based on the authentication type. When noAuthentication is specified, the value is empty. When simpleTextPassword or md5Authentication is specified, the value is a string of 1 to 8 characters in plaintext and displayed as a blank text for security.
auth_mode string	Choices: simple md5 none	Authentication type used for VRRP packet exchanges between virtual routers. The values are noAuthentication, simpleTextPassword, md5Authentication. The default value is noAuthentication.
fast_resume string	Choices: enable disable	mVRRP's fast resume mode.
gratuitous_arp_interval string		Interval at which gratuitous ARP packets are sent, in seconds. The value ranges from 30 to 1200.The default value is 300.
holding_multiplier string		The configured holdMultiplier.The value is an integer ranging from 3 to 10. The default value is 3.
interface string		Name of an interface. The value is a string of 1 to 63 characters.
is_plain boolean	Choices: no yes Default: "false"	Select the display mode of an authentication key. By default, an authentication key is displayed in ciphertext.
preempt_timer_delay string		Preemption delay. The value is an integer ranging from 0 to 3600. The default value is 0.
priority string		Configured VRRP priority. The value ranges from 1 to 254. The default value is 100. A larger value indicates a higher priority.
recover_delay string		Delay in recovering after an interface goes Up. The delay is used for interface flapping suppression. The value is an integer ranging from 0 to 3600. The default value is 0 seconds.
state string	Choices: present ← absent	Specify desired state of the resource.
version string	Choices: v2 v3	VRRP version. The default version is v2.
virtual_ip string		Virtual IP address. The value is a string of 0 to 255 characters.
vrid string	Default: "present"	VRRP backup group ID. The value is an integer ranging from 1 to 255.
vrrp_type string	Choices: normal member admin	Type of a VRRP backup group.

Notes

Note

• This module requires the netconf system service be enabled on the remote device being managed.

• Recommended connection is netconf.

• This module also works with local connections for legacy playbooks.

Examples

- name: Vrrp module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli
  tasks:
  - name: Set vrrp version
    community.network.ce_vrrp:
      version: v3
      provider: "{{ cli }}"
  - name: Set vrrp gratuitous-arp interval
    community.network.ce_vrrp:
      gratuitous_arp_interval: 40
      mlag_id: 4
      provider: "{{ cli }}"
  - name: Set vrrp recover-delay
    community.network.ce_vrrp:
      recover_delay: 10
      provider: "{{ cli }}"
  - name: Set vrrp vrid virtual-ip
    community.network.ce_vrrp:
      interface: 40GE2/0/8
      vrid: 1
      virtual_ip: 10.14.2.7
      provider: "{{ cli }}"
  - name: Set vrrp vrid admin
    community.network.ce_vrrp:
      interface: 40GE2/0/8
      vrid: 1
      vrrp_type: admin
      provider: "{{ cli }}"
  - name: Set vrrp vrid fast_resume
    community.network.ce_vrrp:
      interface: 40GE2/0/8
      vrid: 1
      fast_resume: enable
      provider: "{{ cli }}"
  - name: Set vrrp vrid holding-multiplier
    community.network.ce_vrrp:
      interface: 40GE2/0/8
      vrid: 1
      holding_multiplier: 4
      provider: "{{ cli }}"
  - name: Set vrrp vrid preempt timer delay
    community.network.ce_vrrp:
      interface: 40GE2/0/8
      vrid: 1
      preempt_timer_delay: 10
      provider: "{{ cli }}"
  - name: Set vrrp vrid admin-vrrp
    community.network.ce_vrrp:
      interface: 40GE2/0/8
      vrid: 1
      admin_interface: 40GE2/0/9
      admin_vrid: 2
      vrrp_type: member
      provider: "{{ cli }}"
  - name: Set vrrp vrid authentication-mode
    community.network.ce_vrrp:
      interface: 40GE2/0/8
      vrid: 1
      is_plain: true
      auth_mode: simple
      auth_key: aaa
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	always	k/v pairs of aaa params after module execution Sample: {'auth_mode': 'simple', 'interface': '40GE2/0/8', 'is_plain': 'true', 'vrid': '1', 'vrrp_type': 'normal'}
existing dictionary	always	k/v pairs of existing aaa server Sample: {'auth_mode': 'none', 'interface': '40GE2/0/8', 'is_plain': 'false', 'vrid': '1', 'vrrp_type': 'normal'}
proposed dictionary	always	k/v pairs of parameters passed into module Sample: {'auth_key': 'aaa', 'auth_mode': 'simple', 'interface': '40GE2/0/8', 'is_plain': True, 'state': 'present', 'vrid': '1'}
updates list / elements=string	always	command sent to the device Sample: {'interface 40GE2/0/8': None, 'vrrp vrid 1 authentication-mode simple plain aaa': None}

Authors

• Li Yanfeng (@numone213)